From 9f54aaff7024c462936cf1e62a59a7d183660fd1 Mon Sep 17 00:00:00 2001 From: Koen Vandeputte Date: Thu, 11 Jan 2018 16:04:36 +0100 Subject: [PATCH] cns3xxx: update patches for 4.14 Signed-off-by: Koen Vandeputte --- .../000-cns3xxx_arch_include.patch | 3 +- .../001-arm_openwrt_machtypes.patch | 11 +- .../patches-4.14/075-spi_support.patch | 12 +-- .../cns3xxx/patches-4.14/090-timers.patch | 2 +- .../200-broadcom_phy_reinit.patch | 19 ++-- .../patches-4.14/210-dwc2_defaults.patch | 102 ++++++++++-------- 6 files changed, 85 insertions(+), 64 deletions(-) diff --git a/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch b/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch index f98fe0c2ba66..3ae759021a55 100644 --- a/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch +++ b/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch @@ -1,6 +1,7 @@ --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile -@@ -1,3 +1,5 @@ +@@ -1,4 +1,6 @@ + # SPDX-License-Identifier: GPL-2.0 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o diff --git a/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch b/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch index 32f977fafc4b..17a83ea7aff3 100644 --- a/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch +++ b/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch @@ -1,7 +1,10 @@ --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types -@@ -1006,3 +1006,4 @@ eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572 - eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573 - domotab MACH_DOMOTAB DOMOTAB 4574 - pfla03 MACH_PFLA03 PFLA03 4575 +@@ -448,6 +448,7 @@ gplugd MACH_GPLUGD GPLUGD 2625 + qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 + mx23evk MACH_MX23EVK MX23EVK 2629 + ap4evb MACH_AP4EVB AP4EVB 2630 +gw2388 MACH_GW2388 GW2388 2635 + mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650 + guruplug MACH_GURUPLUG GURUPLUG 2659 + spear310 MACH_SPEAR310 SPEAR310 2660 diff --git a/target/linux/cns3xxx/patches-4.14/075-spi_support.patch b/target/linux/cns3xxx/patches-4.14/075-spi_support.patch index aeda7a326915..8a51eb396b47 100644 --- a/target/linux/cns3xxx/patches-4.14/075-spi_support.patch +++ b/target/linux/cns3xxx/patches-4.14/075-spi_support.patch @@ -1,6 +1,6 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -199,6 +199,13 @@ config SPI_CLPS711X +@@ -206,6 +206,13 @@ config SPI_CLPS711X This enables dedicated general purpose SPI/Microwire1-compatible master mode interface (SSI1) for CLPS711X-based CPUs. @@ -16,7 +16,7 @@ depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x) --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban +@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o @@ -26,7 +26,7 @@ obj-$(CONFIG_SPI_DLN2) += spi-dln2.o --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h -@@ -763,6 +763,10 @@ struct spi_transfer { +@@ -799,6 +799,10 @@ struct spi_transfer { u32 speed_hz; struct list_head transfer_list; @@ -39,13 +39,13 @@ /** --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c -@@ -985,6 +985,9 @@ static int spi_transfer_one_message(stru +@@ -1021,6 +1021,9 @@ static int spi_transfer_one_message(stru list_for_each_entry(xfer, &msg->transfers, transfer_list) { trace_spi_transfer_start(msg, xfer); + xfer->last_in_message_list = + list_is_last(&xfer->transfer_list, &msg->transfers); + - spi_statistics_add_transfer_stats(statm, xfer, master); - spi_statistics_add_transfer_stats(stats, xfer, master); + spi_statistics_add_transfer_stats(statm, xfer, ctlr); + spi_statistics_add_transfer_stats(stats, xfer, ctlr); diff --git a/target/linux/cns3xxx/patches-4.14/090-timers.patch b/target/linux/cns3xxx/patches-4.14/090-timers.patch index 6f7713f209e8..34a4934d62fb 100644 --- a/target/linux/cns3xxx/patches-4.14/090-timers.patch +++ b/target/linux/cns3xxx/patches-4.14/090-timers.patch @@ -30,7 +30,7 @@ twd_local_timer_register(&cns3xx_twd_local_timer); } -+static cycle_t cns3xxx_get_cycles(struct clocksource *cs) ++static u64 cns3xxx_get_cycles(struct clocksource *cs) +{ + u64 val; + diff --git a/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch b/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch index 0352a89f9ee7..6880533a05d1 100644 --- a/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch +++ b/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch @@ -1,14 +1,15 @@ --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c -@@ -420,6 +420,11 @@ static int bcm5481_config_aneg(struct ph - /* Write bits 14:0. */ - reg |= (1 << 15); - phy_write(phydev, 0x18, reg); -+ } else { -+ phy_write(phydev, 0x18, 0xf1e7); -+ phy_write(phydev, 0x1c, 0x8e00); +@@ -417,7 +417,11 @@ static int bcm5481_config_aneg(struct ph + ret = genphy_config_aneg(phydev); + + /* Then we can set up the delay. */ +- bcm5481x_config(phydev); ++ //bcm5481x_config(phydev); + -+ phy_write(phydev, 0x1c, 0xa41f); - } ++ phy_write(phydev, 0x18, 0xf1e7); ++ phy_write(phydev, 0x1c, 0x8e00); ++ phy_write(phydev, 0x1c, 0xa41f); if (of_property_read_bool(np, "enet-phy-lane-swap")) { + /* Lane Swap - Undocumented register...magic! */ diff --git a/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch index 9cd05eac6a76..67f152f43de1 100644 --- a/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch +++ b/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch @@ -1,47 +1,63 @@ ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -308,6 +308,34 @@ static int __dwc2_lowlevel_hw_enable(str - return ret; +--- a/drivers/usb/dwc2/params.c ++++ b/drivers/usb/dwc2/params.c +@@ -136,6 +136,36 @@ static void dwc2_set_stm32f4x9_fsotg_par + p->activate_stm_fs_transceiver = true; } -+static const struct dwc2_core_params params_cns3xxx = { -+ .otg_cap = 2, /* non-HNP/non-SRP capable */ -+ .otg_ver = 0, /* 1.3 */ -+ .dma_enable = 1, -+ .dma_desc_enable = 0, -+ .speed = 0, /* High Speed */ -+ .enable_dynamic_fifo = 1, -+ .en_multiple_tx_fifo = 1, -+ .host_rx_fifo_size = 658, /* 774 DWORDs */ -+ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */ -+ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */ -+ .max_transfer_size = 65535, -+ .max_packet_count = 511, -+ .host_channels = 16, -+ .phy_type = 1, /* UTMI */ -+ .phy_utmi_width = 16, /* 8 bits */ -+ .phy_ulpi_ddr = 0, /* Single */ -+ .phy_ulpi_ext_vbus = 0, -+ .i2c_enable = 0, -+ .ulpi_fs_ls = 0, -+ .host_support_fs_ls_low_power = 0, -+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */ -+ .ts_dline = 0, -+ .reload_ctl = 0, -+ .ahbcfg = 0x10, -+ .uframe_sched = 0, -+}; ++static void dwc2_set_cns3xxx_params(struct dwc2_hsotg *hsotg) ++{ ++ struct dwc2_core_params *p = &hsotg->params; + - /** - * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources - * @hsotg: The driver state -@@ -552,6 +580,9 @@ static int dwc2_driver_probe(struct plat - /* Default all params to autodetect */ - dwc2_set_all_params(&defparams, -1); - params = &defparams; -+#ifdef CONFIG_ARCH_CNS3XXX -+ params = ¶ms_cns3xxx; -+#endif ++ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; /* non-HNP/non-SRP capable */ ++ p->host_dma = 1; ++ p->dma_desc_enable = 0; ++ p->speed = DWC2_SPEED_PARAM_HIGH; /* High Speed */ ++ p->enable_dynamic_fifo = 1; ++ p->en_multiple_tx_fifo = 1; ++ p->host_rx_fifo_size = 658; /* 774 DWORDs */ ++ p->host_nperio_tx_fifo_size = 128; /* 256 DWORDs */ ++ p->host_perio_tx_fifo_size = 658; /* 512 DWORDs */ ++ p->max_transfer_size = 65535, ++ p->max_packet_count = 511; ++ p->host_channels = 16; ++ p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; /* UTMI */ ++ p->phy_utmi_width = 16; /* 8 bits */ ++ p->phy_ulpi_ddr = 0; /* Single */ ++ p->phy_ulpi_ext_vbus = 0; ++ p->i2c_enable = 0; ++ p->ulpi_fs_ls = 0; ++ p->host_support_fs_ls_low_power = 0; ++ p->host_ls_low_power_phy_clk = 0; /* 48 MHz */ ++ p->ts_dline = 0; ++ p->reload_ctl = 0; ++ p->ahbcfg = 0x10; ++ p->uframe_sched = false; ++} ++ + const struct of_device_id dwc2_of_match_table[] = { + { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, + { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, +@@ -710,17 +740,23 @@ int dwc2_get_hwparams(struct dwc2_hsotg + + int dwc2_init_params(struct dwc2_hsotg *hsotg) + { ++ /* + const struct of_device_id *match; + void (*set_params)(void *data); ++ */ + + dwc2_set_default_params(hsotg); + dwc2_get_device_properties(hsotg); + ++ /* + match = of_match_device(dwc2_of_match_table, hsotg->dev); + if (match && match->data) { + set_params = match->data; + set_params(hsotg); + } ++ */ ++ ++ dwc2_set_cns3xxx_params(hsotg); + + dwc2_check_params(hsotg); - /* - * Disable descriptor dma mode by default as the HW can support -- 2.30.2