From a2fc36613ac1af2e92cbed7af80bc72d8114dd50 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 18 Sep 2014 08:58:49 -0700 Subject: [PATCH] ARM: OMAP3: Use manual idle for UARTs because of DMA errata In sprz318f.pdf "Usage Note 2.7" says that UARTs cannot acknowledge idle requests in smartidle mode when configured for DMA operations. This prevents L4 from going idle. So let's use manual idle mode instead. Otherwise systems using Sebastian's 8250 patches with DMA will never enter deeper idle states because of the errata above. Cc: Sebastian Andrzej Siewior Reviewed-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 61cd49d26f6d..2a78b093c0ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -529,7 +529,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | - HWMOD_SWSUP_SIDLE_ACT, + HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -559,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, -- 2.30.2