From a4128b03ff1ff5bc6ea922518a3f36a09b914379 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 14 Sep 2010 17:59:15 +0100 Subject: [PATCH] MN10300: Fix up the IRQ names for the on-chip serial ports Fix up the IRQ names for the MN10300 on-chip serial ports in the driver as request_interrupt() no longer allows names containing slashes, giving a warning like the following if one is encountered: ------------[ cut here ]------------ WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0x62/0x7c() name 'ttySM0/Rx' Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/mn10300-serial.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index 9d49073e827a..db509dd80565 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -156,17 +156,17 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = { ._intr = &SC0ICR, ._rxb = &SC0RXB, ._txb = &SC0TXB, - .rx_name = "ttySM0/Rx", - .tx_name = "ttySM0/Tx", + .rx_name = "ttySM0:Rx", + .tx_name = "ttySM0:Tx", #ifdef CONFIG_MN10300_TTYSM0_TIMER8 - .tm_name = "ttySM0/Timer8", + .tm_name = "ttySM0:Timer8", ._tmxmd = &TM8MD, ._tmxbr = &TM8BR, ._tmicr = &TM8ICR, .tm_irq = TM8IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, #else /* CONFIG_MN10300_TTYSM0_TIMER2 */ - .tm_name = "ttySM0/Timer2", + .tm_name = "ttySM0:Timer2", ._tmxmd = &TM2MD, ._tmxbr = (volatile u16 *) &TM2BR, ._tmicr = &TM2ICR, @@ -209,17 +209,17 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = { ._intr = &SC1ICR, ._rxb = &SC1RXB, ._txb = &SC1TXB, - .rx_name = "ttySM1/Rx", - .tx_name = "ttySM1/Tx", + .rx_name = "ttySM1:Rx", + .tx_name = "ttySM1:Tx", #ifdef CONFIG_MN10300_TTYSM1_TIMER9 - .tm_name = "ttySM1/Timer9", + .tm_name = "ttySM1:Timer9", ._tmxmd = &TM9MD, ._tmxbr = &TM9BR, ._tmicr = &TM9ICR, .tm_irq = TM9IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, #else /* CONFIG_MN10300_TTYSM1_TIMER3 */ - .tm_name = "ttySM1/Timer3", + .tm_name = "ttySM1:Timer3", ._tmxmd = &TM3MD, ._tmxbr = (volatile u16 *) &TM3BR, ._tmicr = &TM3ICR, @@ -260,9 +260,9 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = { .uart.lock = __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock), .name = "ttySM2", - .rx_name = "ttySM2/Rx", - .tx_name = "ttySM2/Tx", - .tm_name = "ttySM2/Timer10", + .rx_name = "ttySM2:Rx", + .tx_name = "ttySM2:Tx", + .tm_name = "ttySM2:Timer10", ._iobase = &SC2CTR, ._control = &SC2CTR, ._status = &SC2STR, -- 2.30.2