From a5ec96ddfd55c501d451cb310566a1170c267ecb Mon Sep 17 00:00:00 2001 From: Leonid Bloch Date: Thu, 9 Aug 2018 01:26:36 +0300 Subject: [PATCH] gpio: it87: Add support for IT8613 This was tested on actual hardware and found to work fine, but currently the official specifications of this chip could not be obtained to confirm the numbers. Signed-off-by: Leonid Bloch Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 3 ++- drivers/gpio/gpio-it87.c | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 7429b30e61b0..f7a0f576f918 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -693,7 +693,8 @@ config GPIO_IT87 Say yes here to support GPIO functionality of IT87xx Super I/O chips. This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and - supports the IT8761E, IT8620E and IT8628E Super I/O chip as well. + supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as + well. To compile this driver as a module, choose M here: the module will be called gpio_it87 diff --git a/drivers/gpio/gpio-it87.c b/drivers/gpio/gpio-it87.c index d34f517fdd44..389ecd8b7d26 100644 --- a/drivers/gpio/gpio-it87.c +++ b/drivers/gpio/gpio-it87.c @@ -35,6 +35,7 @@ /* Chip Id numbers */ #define NO_DEV_ID 0xffff +#define IT8613_ID 0x8613 #define IT8620_ID 0x8620 #define IT8628_ID 0x8628 #define IT8718_ID 0x8718 @@ -308,6 +309,14 @@ static int __init it87_gpio_init(void) it87_gpio->chip = it87_template_chip; switch (chip_type) { + case IT8613_ID: + gpio_ba_reg = 0x62; + it87_gpio->io_size = 8; /* it8613 only needs 6, use 8 for alignment */ + it87_gpio->output_base = 0xc8; + it87_gpio->simple_base = 0xc0; + it87_gpio->simple_size = 6; + it87_gpio->chip.ngpio = 64; /* has 48, use 64 for convenient calc */ + break; case IT8620_ID: case IT8628_ID: gpio_ba_reg = 0x62; -- 2.30.2