From a969e76a7101bf5f3d369563df1ca1253dd6131b Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 29 Sep 2008 13:35:15 +0100 Subject: [PATCH] powerpc: Correct USB support for GE Fanuc SBC610 Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). Fixup to correctly reconfigure USB, provided by an NEC uPD720101, after device is reset. This requires a set of chip specific registers in the devices configuration space to be correctly written, enabling all ports and switching the device to use an external 48-MHz Oscillator. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/gef_sbc610.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 8a9dee247618..ee215002b1cf 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -12,6 +12,8 @@ * * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) * Copyright 2006 Freescale Semiconductor Inc. + * + * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c */ #include @@ -75,6 +77,21 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } +static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); + + /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5); + + /* System clock is 48-MHz Oscillator and EHCI Enabled. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + gef_sbc610_nec_fixup); /* * Called very early, device-tree isn't unflattened -- 2.30.2