From a96afc6b75cf9e7991a9b869246c5dca2a8a4e7a Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Wed, 15 May 2013 14:03:28 +0200 Subject: [PATCH] usb: phy: ab8500-usb: fix phy tuning value select logic The driver supports both ab8500 and ab8505, but the actual phy tuning values logic sets ab8500 values: if (!is_ab8500_2p0_or_earlier(ab->ab8500)) which is supposed to set values for ab8500, but incorrectly results true for ab8505 too. Fix this by adding an additional is_ab8500(ab->ab8500) check. Acked-by: Linus Walleij Acked-by: Maxime Coquelin Signed-off-by: Fabio Baltieri Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-ab8500-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 63bb7cc14a2a..e6d461943f84 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -835,8 +835,8 @@ static int ab8500_usb_probe(struct platform_device *pdev) return err; } - /* Phy tuning values for AB8500 */ - if (!is_ab8500_2p0_or_earlier(ab->ab8500)) { + /* Phy tuning values for AB8500 > v2.0 */ + if (is_ab8500(ab->ab8500) && !is_ab8500_2p0_or_earlier(ab->ab8500)) { /* Enable the PBT/Bank 0x12 access */ err = abx500_set_register_interruptible(ab->dev, AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01); -- 2.30.2