From aa7e1b84c6d424264bab8c29b14ebbc906488853 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 14 Oct 2010 17:49:06 +0300 Subject: [PATCH] ASoC: add ep93xx AC97 audio driver Add support for AC97 controllers found in Cirrus Logic EP93xx family SoCs. Signed-off-by: Mika Westerberg Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/ep93xx/Kconfig | 7 +- sound/soc/ep93xx/Makefile | 2 + sound/soc/ep93xx/ep93xx-ac97.c | 468 +++++++++++++++++++++++++++++++++ 3 files changed, 476 insertions(+), 1 deletion(-) create mode 100644 sound/soc/ep93xx/ep93xx-ac97.c diff --git a/sound/soc/ep93xx/Kconfig b/sound/soc/ep93xx/Kconfig index f617f560f46b..108e5ff3ffc2 100644 --- a/sound/soc/ep93xx/Kconfig +++ b/sound/soc/ep93xx/Kconfig @@ -3,11 +3,16 @@ config SND_EP93XX_SOC depends on ARCH_EP93XX && SND_SOC help Say Y or M if you want to add support for codecs attached to - the EP93xx I2S interface. + the EP93xx I2S or AC97 interfaces. config SND_EP93XX_SOC_I2S tristate +config SND_EP93XX_SOC_AC97 + tristate + select AC97_BUS + select SND_SOC_AC97_BUS + config SND_EP93XX_SOC_SNAPPERCL15 tristate "SoC Audio support for Bluewater Systems Snapper CL15 module" depends on SND_EP93XX_SOC && MACH_SNAPPER_CL15 diff --git a/sound/soc/ep93xx/Makefile b/sound/soc/ep93xx/Makefile index 272e60f57b9a..ac06e0092f95 100644 --- a/sound/soc/ep93xx/Makefile +++ b/sound/soc/ep93xx/Makefile @@ -1,9 +1,11 @@ # EP93xx Platform Support snd-soc-ep93xx-objs := ep93xx-pcm.o snd-soc-ep93xx-i2s-objs := ep93xx-i2s.o +snd-soc-ep93xx-ac97-objs := ep93xx-ac97.o obj-$(CONFIG_SND_EP93XX_SOC) += snd-soc-ep93xx.o obj-$(CONFIG_SND_EP93XX_SOC_I2S) += snd-soc-ep93xx-i2s.o +obj-$(CONFIG_SND_EP93XX_SOC_AC97) += snd-soc-ep93xx-ac97.o # EP93XX Machine Support snd-soc-snappercl15-objs := snappercl15.o diff --git a/sound/soc/ep93xx/ep93xx-ac97.c b/sound/soc/ep93xx/ep93xx-ac97.c new file mode 100644 index 000000000000..68a0bae1208a --- /dev/null +++ b/sound/soc/ep93xx/ep93xx-ac97.c @@ -0,0 +1,468 @@ +/* + * ASoC driver for Cirrus Logic EP93xx AC97 controller. + * + * Copyright (c) 2010 Mika Westerberg + * + * Based on s3c-ac97 ASoC driver by Jaswinder Singh. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include "ep93xx-pcm.h" + +/* + * Per channel (1-4) registers. + */ +#define AC97CH(n) (((n) - 1) * 0x20) + +#define AC97DR(n) (AC97CH(n) + 0x0000) + +#define AC97RXCR(n) (AC97CH(n) + 0x0004) +#define AC97RXCR_REN BIT(0) +#define AC97RXCR_RX3 BIT(3) +#define AC97RXCR_RX4 BIT(4) +#define AC97RXCR_CM BIT(15) + +#define AC97TXCR(n) (AC97CH(n) + 0x0008) +#define AC97TXCR_TEN BIT(0) +#define AC97TXCR_TX3 BIT(3) +#define AC97TXCR_TX4 BIT(4) +#define AC97TXCR_CM BIT(15) + +#define AC97SR(n) (AC97CH(n) + 0x000c) +#define AC97SR_TXFE BIT(1) +#define AC97SR_TXUE BIT(6) + +#define AC97RISR(n) (AC97CH(n) + 0x0010) +#define AC97ISR(n) (AC97CH(n) + 0x0014) +#define AC97IE(n) (AC97CH(n) + 0x0018) + +/* + * Global AC97 controller registers. + */ +#define AC97S1DATA 0x0080 +#define AC97S2DATA 0x0084 +#define AC97S12DATA 0x0088 + +#define AC97RGIS 0x008c +#define AC97GIS 0x0090 +#define AC97IM 0x0094 +/* + * Common bits for RGIS, GIS and IM registers. + */ +#define AC97_SLOT2RXVALID BIT(1) +#define AC97_CODECREADY BIT(5) +#define AC97_SLOT2TXCOMPLETE BIT(6) + +#define AC97EOI 0x0098 +#define AC97EOI_WINT BIT(0) +#define AC97EOI_CODECREADY BIT(1) + +#define AC97GCR 0x009c +#define AC97GCR_AC97IFE BIT(0) + +#define AC97RESET 0x00a0 +#define AC97RESET_TIMEDRESET BIT(0) + +#define AC97SYNC 0x00a4 +#define AC97SYNC_TIMEDSYNC BIT(0) + +#define AC97_TIMEOUT msecs_to_jiffies(5) + +/** + * struct ep93xx_ac97_info - EP93xx AC97 controller info structure + * @lock: mutex serializing access to the bus (slot 1 & 2 ops) + * @dev: pointer to the platform device dev structure + * @mem: physical memory resource for the registers + * @regs: mapped AC97 controller registers + * @irq: AC97 interrupt number + * @done: bus ops wait here for an interrupt + */ +struct ep93xx_ac97_info { + struct mutex lock; + struct device *dev; + struct resource *mem; + void __iomem *regs; + int irq; + struct completion done; +}; + +/* currently ALSA only supports a single AC97 device */ +static struct ep93xx_ac97_info *ep93xx_ac97_info; + +static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_out = { + .name = "ac97-pcm-out", + .dma_port = EP93XX_DMA_M2P_PORT_AAC1, +}; + +static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_in = { + .name = "ac97-pcm-in", + .dma_port = EP93XX_DMA_M2P_PORT_AAC1, +}; + +static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info, + unsigned reg) +{ + return __raw_readl(info->regs + reg); +} + +static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info, + unsigned reg, unsigned val) +{ + __raw_writel(val, info->regs + reg); +} + +static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97, + unsigned short reg) +{ + struct ep93xx_ac97_info *info = ep93xx_ac97_info; + unsigned short val; + + mutex_lock(&info->lock); + + ep93xx_ac97_write_reg(info, AC97S1DATA, reg); + ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID); + if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) { + dev_warn(info->dev, "timeout reading register %x\n", reg); + mutex_unlock(&info->lock); + return -ETIMEDOUT; + } + val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA); + + mutex_unlock(&info->lock); + return val; +} + +static void ep93xx_ac97_write(struct snd_ac97 *ac97, + unsigned short reg, + unsigned short val) +{ + struct ep93xx_ac97_info *info = ep93xx_ac97_info; + + mutex_lock(&info->lock); + + /* + * Writes to the codec need to be done so that slot 2 is filled in + * before slot 1. + */ + ep93xx_ac97_write_reg(info, AC97S2DATA, val); + ep93xx_ac97_write_reg(info, AC97S1DATA, reg); + + ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE); + if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) + dev_warn(info->dev, "timeout writing register %x\n", reg); + + mutex_unlock(&info->lock); +} + +static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97) +{ + struct ep93xx_ac97_info *info = ep93xx_ac97_info; + + mutex_lock(&info->lock); + + /* + * We are assuming that before this functions gets called, the codec + * BIT_CLK is stopped by forcing the codec into powerdown mode. We can + * control the SYNC signal directly via AC97SYNC register. Using + * TIMEDSYNC the controller will keep the SYNC high > 1us. + */ + ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC); + ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY); + if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) + dev_warn(info->dev, "codec warm reset timeout\n"); + + mutex_unlock(&info->lock); +} + +static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97) +{ + struct ep93xx_ac97_info *info = ep93xx_ac97_info; + + mutex_lock(&info->lock); + + /* + * For doing cold reset, we disable the AC97 controller interface, clear + * WINT and CODECREADY bits, and finally enable the interface again. + */ + ep93xx_ac97_write_reg(info, AC97GCR, 0); + ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT); + ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE); + + /* + * Now, assert the reset and wait for the codec to become ready. + */ + ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET); + ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY); + if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) + dev_warn(info->dev, "codec cold reset timeout\n"); + + /* + * Give the codec some time to come fully out from the reset. This way + * we ensure that the subsequent reads/writes will work. + */ + usleep_range(15000, 20000); + + mutex_unlock(&info->lock); +} + +static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id) +{ + struct ep93xx_ac97_info *info = dev_id; + unsigned status, mask; + + /* + * Just mask out the interrupt and wake up the waiting thread. + * Interrupts are cleared via reading/writing to slot 1 & 2 registers by + * the waiting thread. + */ + status = ep93xx_ac97_read_reg(info, AC97GIS); + mask = ep93xx_ac97_read_reg(info, AC97IM); + mask &= ~status; + ep93xx_ac97_write_reg(info, AC97IM, mask); + + complete(&info->done); + return IRQ_HANDLED; +} + +struct snd_ac97_bus_ops soc_ac97_ops = { + .read = ep93xx_ac97_read, + .write = ep93xx_ac97_write, + .reset = ep93xx_ac97_cold_reset, + .warm_reset = ep93xx_ac97_warm_reset, +}; +EXPORT_SYMBOL_GPL(soc_ac97_ops); + +static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai); + unsigned v = 0; + + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* + * Enable compact mode, TX slots 3 & 4, and the TX FIFO + * itself. + */ + v |= AC97TXCR_CM; + v |= AC97TXCR_TX3 | AC97TXCR_TX4; + v |= AC97TXCR_TEN; + ep93xx_ac97_write_reg(info, AC97TXCR(1), v); + } else { + /* + * Enable compact mode, RX slots 3 & 4, and the RX FIFO + * itself. + */ + v |= AC97RXCR_CM; + v |= AC97RXCR_RX3 | AC97RXCR_RX4; + v |= AC97RXCR_REN; + ep93xx_ac97_write_reg(info, AC97RXCR(1), v); + } + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* + * As per Cirrus EP93xx errata described below: + * + * http://www.cirrus.com/en/pubs/errata/ER667E2B.pdf + * + * we will wait for the TX FIFO to be empty before + * clearing the TEN bit. + */ + unsigned long timeout = jiffies + AC97_TIMEOUT; + + do { + v = ep93xx_ac97_read_reg(info, AC97SR(1)); + if (time_after(jiffies, timeout)) { + dev_warn(info->dev, "TX timeout\n"); + break; + } + } while (!(v & (AC97SR_TXFE | AC97SR_TXUE))); + + /* disable the TX FIFO */ + ep93xx_ac97_write_reg(info, AC97TXCR(1), 0); + } else { + /* disable the RX FIFO */ + ep93xx_ac97_write_reg(info, AC97RXCR(1), 0); + } + break; + + default: + dev_warn(info->dev, "unknown command %d\n", cmd); + return -EINVAL; + } + + return 0; +} + +static int ep93xx_ac97_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct ep93xx_pcm_dma_params *dma_data; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dma_data = &ep93xx_ac97_pcm_out; + else + dma_data = &ep93xx_ac97_pcm_in; + + snd_soc_dai_set_dma_data(dai, substream, dma_data); + return 0; +} + +static struct snd_soc_dai_ops ep93xx_ac97_dai_ops = { + .startup = ep93xx_ac97_startup, + .trigger = ep93xx_ac97_trigger, +}; + +struct snd_soc_dai_driver ep93xx_ac97_dai = { + .name = "ep93xx-ac97", + .id = 0, + .ac97_control = 1, + .playback = { + .stream_name = "AC97 Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "AC97 Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = &ep93xx_ac97_dai_ops, +}; + +static int __devinit ep93xx_ac97_probe(struct platform_device *pdev) +{ + struct ep93xx_ac97_info *info; + int ret; + + info = kzalloc(sizeof(struct ep93xx_ac97_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, info); + + mutex_init(&info->lock); + init_completion(&info->done); + info->dev = &pdev->dev; + + info->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!info->mem) { + ret = -ENXIO; + goto fail_free_info; + } + + info->irq = platform_get_irq(pdev, 0); + if (!info->irq) { + ret = -ENXIO; + goto fail_free_info; + } + + if (!request_mem_region(info->mem->start, resource_size(info->mem), + pdev->name)) { + ret = -EBUSY; + goto fail_free_info; + } + + info->regs = ioremap(info->mem->start, resource_size(info->mem)); + if (!info->regs) { + ret = -ENOMEM; + goto fail_release_mem; + } + + ret = request_irq(info->irq, ep93xx_ac97_interrupt, IRQF_TRIGGER_HIGH, + pdev->name, info); + if (ret) + goto fail_unmap_mem; + + ep93xx_ac97_info = info; + platform_set_drvdata(pdev, info); + + ret = snd_soc_register_dai(&pdev->dev, &ep93xx_ac97_dai); + if (ret) + goto fail_free_irq; + + return 0; + +fail_free_irq: + platform_set_drvdata(pdev, NULL); + free_irq(info->irq, info); +fail_unmap_mem: + iounmap(info->regs); +fail_release_mem: + release_mem_region(info->mem->start, resource_size(info->mem)); +fail_free_info: + kfree(info); + + return ret; +} + +static int __devexit ep93xx_ac97_remove(struct platform_device *pdev) +{ + struct ep93xx_ac97_info *info = platform_get_drvdata(pdev); + + snd_soc_unregister_dai(&pdev->dev); + + /* disable the AC97 controller */ + ep93xx_ac97_write_reg(info, AC97GCR, 0); + + free_irq(info->irq, info); + iounmap(info->regs); + release_mem_region(info->mem->start, resource_size(info->mem)); + platform_set_drvdata(pdev, NULL); + kfree(info); + + return 0; +} + +static struct platform_driver ep93xx_ac97_driver = { + .probe = ep93xx_ac97_probe, + .remove = __devexit_p(ep93xx_ac97_remove), + .driver = { + .name = "ep93xx-ac97", + .owner = THIS_MODULE, + }, +}; + +static int __init ep93xx_ac97_init(void) +{ + return platform_driver_register(&ep93xx_ac97_driver); +} +module_init(ep93xx_ac97_init); + +static void __exit ep93xx_ac97_exit(void) +{ + platform_driver_unregister(&ep93xx_ac97_driver); +} +module_exit(ep93xx_ac97_exit); + +MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver"); +MODULE_AUTHOR("Mika Westerberg "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ep93xx-ac97"); -- 2.30.2