From ab06aaf6a6d5de896e4c52e158be2881036cbee9 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 28 Apr 2008 02:14:58 -0700 Subject: [PATCH] gxfb: create DC/VP/FP-specific handlers rather than using readl/writel This creates read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for reading and updating those registers. It creates gxfb.h to house these. We also drop a no-op readl() from gx_set_mode. Other than that, there should be no functionality change. Signed-off-by: Andres Salomon Cc: Jordan Crouse Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/geode/display_gx.c | 48 ++++++++++++++++++-------------- drivers/video/geode/gxfb.h | 47 +++++++++++++++++++++++++++++++ drivers/video/geode/gxfb_core.c | 4 +-- drivers/video/geode/video_gx.c | 41 ++++++++++++++------------- 4 files changed, 97 insertions(+), 43 deletions(-) create mode 100644 drivers/video/geode/gxfb.h diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c index 8cd75725a31b..47f422e19974 100644 --- a/drivers/video/geode/display_gx.c +++ b/drivers/video/geode/display_gx.c @@ -20,6 +20,7 @@ #include "geodefb.h" #include "display_gx.h" +#include "gxfb.h" unsigned int gx_frame_buffer_size(void) { @@ -50,22 +51,21 @@ static void gx_set_mode(struct fb_info *info) int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; /* Unlock the display controller registers. */ - readl(par->dc_regs + DC_UNLOCK); - writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); + write_dc(par, DC_UNLOCK, DC_UNLOCK_CODE); - gcfg = readl(par->dc_regs + DC_GENERAL_CFG); - dcfg = readl(par->dc_regs + DC_DISPLAY_CFG); + gcfg = read_dc(par, DC_GENERAL_CFG); + dcfg = read_dc(par, DC_DISPLAY_CFG); /* Disable the timing generator. */ dcfg &= ~(DC_DCFG_TGEN); - writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); + write_dc(par, DC_DISPLAY_CFG, dcfg); /* Wait for pending memory requests before disabling the FIFO load. */ udelay(100); /* Disable FIFO load and compression. */ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); - writel(gcfg, par->dc_regs + DC_GENERAL_CFG); + write_dc(par, DC_GENERAL_CFG, gcfg); /* Setup DCLK and its divisor. */ par->vid_ops->set_dclk(info); @@ -83,12 +83,12 @@ static void gx_set_mode(struct fb_info *info) gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE; /* Framebuffer start offset. */ - writel(0, par->dc_regs + DC_FB_ST_OFFSET); + write_dc(par, DC_FB_ST_OFFSET, 0); /* Line delta and line buffer length. */ - writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); - writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, - par->dc_regs + DC_LINE_SIZE); + write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3); + write_dc(par, DC_LINE_SIZE, + ((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2); /* Enable graphics and video data and unmask address lines. */ @@ -127,22 +127,28 @@ static void gx_set_mode(struct fb_info *info) vblankend = vsyncend + info->var.upper_margin; vtotal = vblankend; - writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); - writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); - writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); + write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) | + ((htotal - 1) << 16)); + write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) | + ((hblankend - 1) << 16)); + write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1) | + ((hsyncend - 1) << 16)); - writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); - writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); - writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); + write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) | + ((vtotal - 1) << 16)); + write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) | + ((vblankend - 1) << 16)); + write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1) | + ((vsyncend - 1) << 16)); /* Write final register values. */ - writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); - writel(gcfg, par->dc_regs + DC_GENERAL_CFG); + write_dc(par, DC_DISPLAY_CFG, dcfg); + write_dc(par, DC_GENERAL_CFG, gcfg); par->vid_ops->configure_display(info); /* Relock display controller registers */ - writel(0, par->dc_regs + DC_UNLOCK); + write_dc(par, DC_UNLOCK, 0); } static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno, @@ -156,8 +162,8 @@ static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno, val |= (green) & 0x00ff00; val |= (blue >> 8) & 0x0000ff; - writel(regno, par->dc_regs + DC_PAL_ADDRESS); - writel(val, par->dc_regs + DC_PAL_DATA); + write_dc(par, DC_PAL_ADDRESS, regno); + write_dc(par, DC_PAL_DATA, val); } struct geode_dc_ops gx_dc_ops = { diff --git a/drivers/video/geode/gxfb.h b/drivers/video/geode/gxfb.h new file mode 100644 index 000000000000..42fa10db619a --- /dev/null +++ b/drivers/video/geode/gxfb.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2008 Andres Salomon + * + * Geode GX2 register tables + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef _GXFB_H_ +#define _GXFB_H_ + +#include + +static inline uint32_t read_dc(struct geodefb_par *par, int reg) +{ + return readl(par->dc_regs + reg); +} + +static inline void write_dc(struct geodefb_par *par, int reg, uint32_t val) +{ + writel(val, par->dc_regs + reg); + +} + +static inline uint32_t read_vp(struct geodefb_par *par, int reg) +{ + return readl(par->vid_regs + reg); +} + +static inline void write_vp(struct geodefb_par *par, int reg, uint32_t val) +{ + writel(val, par->vid_regs + reg); +} + +static inline uint32_t read_fp(struct geodefb_par *par, int reg) +{ + return readl(par->vid_regs + reg); +} + +static inline void write_fp(struct geodefb_par *par, int reg, uint32_t val) +{ + writel(val, par->vid_regs + reg); +} + +#endif diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index 8021bcb9ab6a..fd58dcc44670 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -35,6 +35,7 @@ #include "geodefb.h" #include "display_gx.h" #include "video_gx.h" +#include "gxfb.h" static char *mode_option; static int vram; @@ -243,8 +244,7 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de /* Set the 16MiB aligned base address of the graphics memory region * in the display controller */ - writel(info->fix.smem_start & 0xFF000000, - par->dc_regs + DC_GLIU0_MEM_OFFSET); + write_dc(par, DC_GLIU0_MEM_OFFSET, info->fix.smem_start & 0xFF000000); dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n", info->fix.smem_len / 1024, info->fix.smem_start); diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c index cfe2c80b025d..e45d94143da0 100644 --- a/drivers/video/geode/video_gx.c +++ b/drivers/video/geode/video_gx.c @@ -20,6 +20,7 @@ #include "geodefb.h" #include "video_gx.h" +#include "gxfb.h" /* @@ -192,16 +193,16 @@ gx_configure_tft(struct fb_info *info) /* Turn off the panel */ - fp = readl(par->vid_regs + GX_FP_PM); + fp = read_fp(par, GX_FP_PM); fp &= ~GX_FP_PM_P; - writel(fp, par->vid_regs + GX_FP_PM); + write_fp(par, GX_FP_PM, fp); /* Set timing 1 */ - fp = readl(par->vid_regs + GX_FP_PT1); + fp = read_fp(par, GX_FP_PT1); fp &= GX_FP_PT1_VSIZE_MASK; fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; - writel(fp, par->vid_regs + GX_FP_PT1); + write_fp(par, GX_FP_PT1, fp); /* Timing 2 */ /* Set bits that are always on for TFT */ @@ -216,22 +217,22 @@ gx_configure_tft(struct fb_info *info) if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) fp |= GX_FP_PT2_HSP; - writel(fp, par->vid_regs + GX_FP_PT2); + write_fp(par, GX_FP_PT2, fp); /* Set the dither control */ - writel(0x70, par->vid_regs + GX_FP_DFC); + write_fp(par, GX_FP_DFC, 0x70); /* Enable the FP data and power (in case the BIOS didn't) */ - fp = readl(par->vid_regs + GX_DCFG); + fp = read_vp(par, GX_DCFG); fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN; - writel(fp, par->vid_regs + GX_DCFG); + write_vp(par, GX_DCFG, fp); /* Unblank the panel */ - fp = readl(par->vid_regs + GX_FP_PM); + fp = read_fp(par, GX_FP_PM); fp |= GX_FP_PM_P; - writel(fp, par->vid_regs + GX_FP_PM); + write_fp(par, GX_FP_PM, fp); } static void gx_configure_display(struct fb_info *info) @@ -240,11 +241,11 @@ static void gx_configure_display(struct fb_info *info) u32 dcfg, misc; /* Write the display configuration */ - dcfg = readl(par->vid_regs + GX_DCFG); + dcfg = read_vp(par, GX_DCFG); /* Disable hsync and vsync */ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); - writel(dcfg, par->vid_regs + GX_DCFG); + write_vp(par, GX_DCFG, dcfg); /* Clear bits from existing mode. */ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK @@ -257,7 +258,7 @@ static void gx_configure_display(struct fb_info *info) /* Enable hsync and vsync. */ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; - misc = readl(par->vid_regs + GX_MISC); + misc = read_vp(par, GX_MISC); /* Disable gamma correction */ misc |= GX_MISC_GAM_EN; @@ -266,7 +267,7 @@ static void gx_configure_display(struct fb_info *info) /* Power up the CRT DACs */ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); - writel(misc, par->vid_regs + GX_MISC); + write_vp(par, GX_MISC, misc); /* Only change the sync polarities if we are running * in CRT mode. The FP polarities will be handled in @@ -278,7 +279,7 @@ static void gx_configure_display(struct fb_info *info) } else { /* Power down the CRT DACs if in FP mode */ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); - writel(misc, par->vid_regs + GX_MISC); + write_vp(par, GX_MISC, misc); } /* Enable the display logic */ @@ -288,7 +289,7 @@ static void gx_configure_display(struct fb_info *info) /* Enable the external DAC VREF? */ - writel(dcfg, par->vid_regs + GX_DCFG); + write_vp(par, GX_DCFG, dcfg); /* Set up the flat panel (if it is enabled) */ @@ -322,7 +323,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode) default: return -EINVAL; } - dcfg = readl(par->vid_regs + GX_DCFG); + dcfg = read_vp(par, GX_DCFG); dcfg &= ~(GX_DCFG_DAC_BL_EN | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN); if (!blank) @@ -331,17 +332,17 @@ static int gx_blank_display(struct fb_info *info, int blank_mode) dcfg |= GX_DCFG_HSYNC_EN; if (vsync) dcfg |= GX_DCFG_VSYNC_EN; - writel(dcfg, par->vid_regs + GX_DCFG); + write_vp(par, GX_DCFG, dcfg); /* Power on/off flat panel. */ if (par->enable_crt == 0) { - fp_pm = readl(par->vid_regs + GX_FP_PM); + fp_pm = read_fp(par, GX_FP_PM); if (blank_mode == FB_BLANK_POWERDOWN) fp_pm &= ~GX_FP_PM_P; else fp_pm |= GX_FP_PM_P; - writel(fp_pm, par->vid_regs + GX_FP_PM); + write_fp(par, GX_FP_PM, fp_pm); } return 0; -- 2.30.2