From b00f025cf8242a4c91402abeaac6c2b589fcb263 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 23 May 2014 13:16:42 -0700 Subject: [PATCH] drm/i915/vlv: move CRI refclk enable into __vlv_set_power_well MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This needs to be done before we power back on the CMN_BC well so the PHY can calibrate properly. Signed-off-by: Jesse Barnes Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 8 -------- drivers/gpu/drm/i915/intel_pm.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bcbd742149c6..4973fe03f9aa 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1484,14 +1484,6 @@ static void intel_reset_dpio(struct drm_device *dev) if (!IS_VALLEYVIEW(dev)) return; - /* - * Enable the CRI clock source so we can get at the display and the - * reference clock for VGA hotplug / manual detection. - */ - I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | - DPLL_REFA_CLK_ENABLE_VLV | - DPLL_INTEGRATED_CRI_CLK_VLV); - if (IS_CHERRYVIEW(dev)) { enum dpio_phy phy; u32 val; diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 25caf8fb6656..813afac04ddf 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5715,6 +5715,17 @@ void __vlv_set_power_well(struct drm_i915_private *dev_priv, u32 state; u32 ctrl; + if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC && enable) { + /* + * Enable the CRI clock source so we can get at the display + * and the reference clock for VGA hotplug / manual detection. + */ + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV | + DPLL_INTEGRATED_CRI_CLK_VLV); + udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ + } + mask = PUNIT_PWRGT_MASK(power_well_id); state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) : PUNIT_PWRGT_PWR_GATE(power_well_id); -- 2.30.2