From b0c74b96d177304b6d6f8981e90f37f1cd6afa58 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 24 Jun 2019 11:50:56 +0200 Subject: [PATCH] clocksource/drivers/davinci: Add support for clocksource Extend the davinci-timer driver to also register a clock source. Signed-off-by: Bartosz Golaszewski Signed-off-by: Daniel Lezcano --- drivers/clocksource/timer-davinci.c | 85 +++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c index 246a5564495d..62745c962049 100644 --- a/drivers/clocksource/timer-davinci.c +++ b/drivers/clocksource/timer-davinci.c @@ -43,6 +43,8 @@ #define DAVINCI_TIMER_MIN_DELTA 0x01 #define DAVINCI_TIMER_MAX_DELTA 0xfffffffe +#define DAVINCI_TIMER_CLKSRC_BITS 32 + #define DAVINCI_TIMER_TGCR_DEFAULT \ (DAVINCI_TIMER_TIMMODE_32BIT_UNCHAINED | DAVINCI_TIMER_UNRESET) @@ -52,6 +54,16 @@ struct davinci_clockevent { unsigned int cmp_off; }; +/* + * This must be globally accessible by davinci_timer_read_sched_clock(), so + * let's keep it here. + */ +static struct { + struct clocksource dev; + void __iomem *base; + unsigned int tim_off; +} davinci_clocksource; + static struct davinci_clockevent * to_davinci_clockevent(struct clock_event_device *clockevent) { @@ -166,6 +178,53 @@ static irqreturn_t davinci_timer_irq_timer(int irq, void *data) return IRQ_HANDLED; } +static u64 notrace davinci_timer_read_sched_clock(void) +{ + return readl_relaxed(davinci_clocksource.base + + davinci_clocksource.tim_off); +} + +static u64 davinci_clocksource_read(struct clocksource *dev) +{ + return davinci_timer_read_sched_clock(); +} + +/* + * Standard use-case: we're using tim12 for clockevent and tim34 for + * clocksource. The default is making the former run in oneshot mode + * and the latter in periodic mode. + */ +static void davinci_clocksource_init_tim34(void __iomem *base) +{ + int tcr; + + tcr = DAVINCI_TIMER_ENAMODE_PERIODIC << + DAVINCI_TIMER_ENAMODE_SHIFT_TIM34; + tcr |= DAVINCI_TIMER_ENAMODE_ONESHOT << + DAVINCI_TIMER_ENAMODE_SHIFT_TIM12; + + writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34); + writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD34); + writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR); +} + +/* + * Special use-case on da830: the DSP may use tim34. We're using tim12 for + * both clocksource and clockevent. We set tim12 to periodic and don't touch + * tim34. + */ +static void davinci_clocksource_init_tim12(void __iomem *base) +{ + unsigned int tcr; + + tcr = DAVINCI_TIMER_ENAMODE_PERIODIC << + DAVINCI_TIMER_ENAMODE_SHIFT_TIM12; + + writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM12); + writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD12); + writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR); +} + static void davinci_timer_init(void __iomem *base) { /* Set clock to internal mode and disable it. */ @@ -247,6 +306,32 @@ int __init davinci_timer_register(struct clk *clk, DAVINCI_TIMER_MIN_DELTA, DAVINCI_TIMER_MAX_DELTA); + davinci_clocksource.dev.rating = 300; + davinci_clocksource.dev.read = davinci_clocksource_read; + davinci_clocksource.dev.mask = + CLOCKSOURCE_MASK(DAVINCI_TIMER_CLKSRC_BITS); + davinci_clocksource.dev.flags = CLOCK_SOURCE_IS_CONTINUOUS; + davinci_clocksource.base = base; + + if (timer_cfg->cmp_off) { + davinci_clocksource.dev.name = "tim12"; + davinci_clocksource.tim_off = DAVINCI_TIMER_REG_TIM12; + davinci_clocksource_init_tim12(base); + } else { + davinci_clocksource.dev.name = "tim34"; + davinci_clocksource.tim_off = DAVINCI_TIMER_REG_TIM34; + davinci_clocksource_init_tim34(base); + } + + rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate); + if (rv) { + pr_err("Unable to register clocksource"); + return rv; + } + + sched_clock_register(davinci_timer_read_sched_clock, + DAVINCI_TIMER_CLKSRC_BITS, tick_rate); + return 0; } -- 2.30.2