From bad3db104f8922df2c84fd7653cfbcbc93cd0cb7 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 11 Sep 2014 11:29:42 +0800 Subject: [PATCH] ARM: imx: source gpt per clk from OSC for system timer On i.MX6Q TO > 1.0, i.MX6DL and i.MX6SX, gpt per clock can be from OSC instead of ipg_per, as ipg_per's rate may be scaled when system enter low bus mode, to keep system timer NOT drift, better to make gpt per clock at fixed rate, here add support for gpt per clock to be from OSC which is at fixed rate always. There are some difference on this implementation of gpt per clock source, see below for details: i.MX6Q TO > 1.0: GPT_CR_CLKSRC, b'101 selects fix clock of OSC / 8 for gpt per clk; i.MX6DL and i.MX6SX: GPT_CR_CLKSRC, b'101 selects OSC for gpt per clk, and we must enable GPT_CR_24MEM to enable OSC clk source for gpt per, GPT_PR_PRESCALER24M is for pre-scaling of this OSC clk, here set it to 8 to make gpt per clk is 3MHz; i.MX6SL: ipg_per can be from OSC directly, so no need to implement this new clk source for gpt per. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/time.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index bf92e5a351c0..15d18e198303 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -60,17 +60,22 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MX5 */ +/* MX31, MX35, MX25, MX5, MX6 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) #define V2_TCTL_CLK_PER (2 << 6) +#define V2_TCTL_CLK_OSC_DIV8 (5 << 6) #define V2_TCTL_FRR (1 << 9) +#define V2_TCTL_24MEN (1 << 10) +#define V2_TPRER_PRE24M 12 #define V2_IR 0x0c #define V2_TSTAT 0x08 #define V2_TSTAT_OF1 (1 << 0) #define V2_TCN 0x24 #define V2_TCMP 0x10 +#define V2_TIMER_RATE_OSC_DIV8 3000000 + #define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) #define timer_is_v2() (!timer_is_v1()) @@ -312,10 +317,22 @@ static void __init _mxc_timer_init(int irq, __raw_writel(0, timer_base + MXC_TCTL); __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; - else + if (timer_is_v2()) { + tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) { + tctl_val |= V2_TCTL_CLK_OSC_DIV8; + if (cpu_is_imx6dl() || cpu_is_imx6sx()) { + /* 24 / 8 = 3 MHz */ + __raw_writel(7 << V2_TPRER_PRE24M, + timer_base + MXC_TPRER); + tctl_val |= V2_TCTL_24MEN; + } + } else { + tctl_val |= V2_TCTL_CLK_PER; + } + } else { tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; + } __raw_writel(tctl_val, timer_base + MXC_TCTL); @@ -349,9 +366,13 @@ static void __init mxc_timer_init_dt(struct device_node *np) WARN_ON(!timer_base); irq = irq_of_parse_and_map(np, 0); - clk_per = of_clk_get_by_name(np, "per"); clk_ipg = of_clk_get_by_name(np, "ipg"); + /* Try osc_per first, and fall back to per otherwise */ + clk_per = of_clk_get_by_name(np, "osc_per"); + if (IS_ERR(clk_per)) + clk_per = of_clk_get_by_name(np, "per"); + _mxc_timer_init(irq, clk_per, clk_ipg); } CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt); -- 2.30.2