From bc832fa2c0310c25ed60204616ccef4f8db088f3 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Fri, 4 Dec 2009 05:57:28 -0300 Subject: [PATCH] V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on relevant devices Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/mantis/hopper_vp3028.c | 27 +++++++++---- drivers/media/dvb/mantis/mantis_common.h | 13 ++++-- drivers/media/dvb/mantis/mantis_i2c.c | 47 +++++++++++++++++----- drivers/media/dvb/mantis/mantis_vp1033.c | 36 ++++++++++++----- drivers/media/dvb/mantis/mantis_vp1034.c | 32 +++++++++++---- drivers/media/dvb/mantis/mantis_vp2033.c | 50 +++++++++++++++-------- drivers/media/dvb/mantis/mantis_vp2040.c | 51 ++++++++++++++++-------- drivers/media/dvb/mantis/mantis_vp3030.c | 22 +++++++--- 8 files changed, 203 insertions(+), 75 deletions(-) diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c index ba0c7e58b7a6..16b39d3b9ace 100644 --- a/drivers/media/dvb/mantis/hopper_vp3028.c +++ b/drivers/media/dvb/mantis/hopper_vp3028.c @@ -45,17 +45,30 @@ struct zl10353_config hopper_vp3028_config = { static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) { struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; int err = 0; + gpio_set_bits(mantis, config->reset, 0); + msleep(100); err = mantis_frontend_power(mantis, POWER_ON); - mantis_frontend_soft_reset(mantis); - - dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); - fe = zl10353_attach(&hopper_vp3028_config, adapter); - - if (!fe) - return -1; + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&hopper_vp3028_config, adapter); + + if (!fe) + return -1; + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } dprintk(MANTIS_ERROR, 1, "Done!"); return 0; diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h index e912c5962e3a..6ae3aabe5604 100644 --- a/drivers/media/dvb/mantis/mantis_common.h +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -32,6 +32,7 @@ #define MANTIS_NOTICE 1 #define MANTIS_INFO 2 #define MANTIS_DEBUG 3 +#define MANTIS_TMG 9 #define dprintk(y, z, format, arg...) do { \ if (z) { \ @@ -43,6 +44,8 @@ printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ } else { \ if (mantis->verbose > y) \ printk(format , ##arg); \ @@ -54,9 +57,6 @@ #define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr))) #define mmread(addr) mread(mantis->mmio + (addr)) -#define mmand(dat, addr) mmwrite((dat) & mmread(addr), addr) -#define mmor(dat, addr) mmwrite((dat) | mmread(addr), addr) -#define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr) #define MANTIS_TS_188 0 #define MANTIS_TS_204 1 @@ -75,6 +75,11 @@ .driver_data = (unsigned long) (__configptr) \ } +enum mantis_i2c_mode { + MANTIS_PAGE_MODE = 0, + MANTIS_BYTE_MODE, +}; + struct mantis_pci; struct mantis_hwconfig { @@ -91,6 +96,8 @@ struct mantis_hwconfig { u8 power; u8 reset; + + enum mantis_i2c_mode i2c_mode; }; struct mantis_pci { diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c index 16b9e7e77b82..758f32a63b2f 100644 --- a/drivers/media/dvb/mantis/mantis_i2c.c +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -35,6 +35,8 @@ #define I2C_HW_B_MANTIS 0x1c +#define TRIALS 10000 + static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) { u32 rxd, i, stat, trials; @@ -55,13 +57,25 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) mmwrite(rxd, MANTIS_I2CDATA_CTL); /* wait for xfer completion */ - for (trials = 0; trials < 100; trials++) { - udelay(500); + for (trials = 0; trials < TRIALS; trials++) { + msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; } + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + msleep(1); + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + rxd = mmread(MANTIS_I2CDATA_CTL); msg->buf[i] = (u8)((rxd >> 8) & 0xFF); dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); @@ -93,12 +107,24 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg mmwrite(txd, MANTIS_I2CDATA_CTL); /* wait for xfer completion */ - for (trials = 0; trials < 100; trials++) { - udelay(500); + for (trials = 0; trials < TRIALS; trials++) { + msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + msleep(1); + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); } dprintk(MANTIS_INFO, 0, "]\n"); @@ -122,10 +148,11 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in while (i < num) { /* Byte MODE */ - if (((i + 1) < num) && - (msgs[i].len < 2) && - (msgs[i + 1].len < 2) && - (msgs[i + 1].flags & I2C_M_RD)) { + if ((config->i2c_mode & MANTIS_BYTE_MODE) && + ((i + 1) < num) && + (msgs[i].len < 2) && + (msgs[i + 1].len < 2) && + (msgs[i + 1].flags & I2C_M_RD)) { dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); @@ -136,8 +163,8 @@ static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, in mmwrite(txd, MANTIS_I2CDATA_CTL); /* wait for xfer completion */ - for (trials = 0; trials < 100; trials++) { - udelay(500); + for (trials = 0; trials < TRIALS; trials++) { + msleep(1); stat = mmread(MANTIS_INT_STAT); if (stat & MANTIS_INT_I2CDONE) break; diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c index f2092ce9c4be..0bea6e89f551 100644 --- a/drivers/media/dvb/mantis/mantis_vp1033.c +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -31,7 +31,10 @@ #include "stv0299.h" #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp1033.h" +#include "mantis_reg.h" u8 lgtdqcs001f_inittab[] = { 0x01, 0x15, @@ -163,19 +166,32 @@ static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); - fe = stv0299_attach(&lgtdqcs001f_config, adapter); + int err = 0; - if (fe) { - fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; - dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", - lgtdqcs001f_config.demod_address); + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); - dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + fe = stv0299_attach(&lgtdqcs001f_config, adapter); + + if (fe) { + fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + } else { + return -1; + } } else { - return -1; - } + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + return -EIO; + } mantis->fe = fe; dprintk(MANTIS_ERROR, 1, "Done!"); @@ -192,4 +208,6 @@ struct mantis_hwconfig vp1033_config = { .bytes = 0, .frontend_init = vp1033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c index 40778ec8f460..98a4ec89f048 100644 --- a/drivers/media/dvb/mantis/mantis_vp1034.c +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -32,6 +32,7 @@ #include "mb86a16.h" #include "mantis_common.h" #include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp1034.h" #include "mantis_reg.h" @@ -74,17 +75,30 @@ static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); - fe = mb86a16_attach(&vp1034_mb86a16_config, adapter); - if (fe) { - dprintk(MANTIS_ERROR, 1, - "found MB86A16 DVB-S/DSS frontend @0x%02x", - vp1034_mb86a16_config.demod_address); + int err = 0; + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); + fe = mb86a16_attach(&vp1034_mb86a16_config, adapter); + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found MB86A16 DVB-S/DSS frontend @0x%02x", + vp1034_mb86a16_config.demod_address); + + } else { + return -1; + } } else { - return -1; - } + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + return -EIO; + } mantis->fe = fe; dprintk(MANTIS_ERROR, 1, "Done!"); @@ -101,4 +115,6 @@ struct mantis_hwconfig vp1034_config = { .bytes = 0, .frontend_init = vp1034_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c index 877329175d0f..cef108c5ffc7 100644 --- a/drivers/media/dvb/mantis/mantis_vp2033.c +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -31,6 +31,8 @@ #include "tda1002x.h" #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp2033.h" #define MANTIS_MODEL_NAME "VP-2033" @@ -123,32 +125,46 @@ static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - fe = tda10021_attach(&vp2033_tda1002x_cu1216_config, - adapter, - read_pwm(mantis)); + int err = 0; - if (fe) { - dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", - vp2033_tda1002x_cu1216_config.demod_address); - } else { - fe = tda10023_attach(&vp2033_tda10023_cu1216_config, + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2033_tda1002x_cu1216_config, adapter, read_pwm(mantis)); if (fe) { dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", vp2033_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2033_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } } - } - if (fe) { - fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; - dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } } else { - return -1; + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; } mantis->fe = fe; @@ -167,4 +183,6 @@ struct mantis_hwconfig vp2033_config = { .bytes = 0, .frontend_init = vp2033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c index 51b082f7f917..e2019884ac3a 100644 --- a/drivers/media/dvb/mantis/mantis_vp2040.c +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -31,6 +31,8 @@ #include "tda1002x.h" #include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" #include "mantis_vp2040.h" #define MANTIS_MODEL_NAME "VP-2040" @@ -123,34 +125,47 @@ static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * { struct i2c_adapter *adapter = &mantis->adapter; - dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); - fe = tda10021_attach(&vp2040_tda1002x_cu1216_config, - adapter, - read_pwm(mantis)); + int err = 0; - if (fe) { - dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", - vp2040_tda1002x_cu1216_config.demod_address); - } else { - fe = tda10023_attach(&vp2040_tda10023_cu1216_config, + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2040_tda1002x_cu1216_config, adapter, read_pwm(mantis)); if (fe) { dprintk(MANTIS_ERROR, 1, - "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", vp2040_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2040_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } } - } - if (fe) { - fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; - dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } } else { - return -1; - } + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + return -EIO; + } mantis->fe = fe; dprintk(MANTIS_DEBUG, 1, "Done!"); @@ -167,4 +182,6 @@ struct mantis_hwconfig vp2040_config = { .bytes = 0, .frontend_init = vp2040_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, }; diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c index 9efcfa7b8ab4..a44fac3aabc6 100644 --- a/drivers/media/dvb/mantis/mantis_vp3030.c +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -66,13 +66,23 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend * msleep(100); gpio_set_bits(mantis, config->reset, 1); - dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); - fe = zl10353_attach(&mantis_vp3030_config, adapter); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&mantis_vp3030_config, adapter); - if (!fe) - return -1; + if (!fe) + return -1; - tda665x_attach(fe, &env57h12d5_config, adapter); + tda665x_attach(fe, &env57h12d5_config, adapter); + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + + } mantis->fe = fe; dprintk(MANTIS_ERROR, 1, "Done!"); @@ -91,4 +101,6 @@ struct mantis_hwconfig vp3030_config = { .frontend_init = vp3030_frontend_init, .power = GPIF_A12, .reset = GPIF_A13, + + .i2c_mode = MANTIS_BYTE_MODE }; -- 2.30.2