From beb58aa39e6e5a52875defe12c7697b0bfa95d4c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 13 Feb 2007 22:09:03 +0100 Subject: [PATCH] i2c: PA Semi SMBus driver New driver for the PA Semi SMBus interfaces. Signed-off-by: Olof Johansson Signed-off-by: Jean Delvare --- MAINTAINERS | 6 + drivers/i2c/busses/Kconfig | 7 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-pasemi.c | 426 ++++++++++++++++++++++++++++++++ 4 files changed, 440 insertions(+) create mode 100644 drivers/i2c/busses/i2c-pasemi.c diff --git a/MAINTAINERS b/MAINTAINERS index f85c603b02a3..93a338daedd8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2523,6 +2523,12 @@ M: olof@lixom.net L: netdev@vger.kernel.org S: Maintained +PA SEMI SMBUS DRIVER +P: Olof Johansson +M: olof@lixom.net +L: i2c@lm-sensors.org +S: Maintained + PARALLEL PORT SUPPORT P: Phil Blundell M: philb@gnu.org diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 25d52e0eec2c..4d44a2db29dd 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -342,6 +342,13 @@ config I2C_PARPORT_LIGHT This support is also available as a module. If so, the module will be called i2c-parport-light. +config I2C_PASEMI + tristate "PA Semi SMBus interface" +# depends on PPC_PASEMI && I2C && PCI + depends on I2C && PCI + help + Supports the PA Semi PWRficient on-chip SMBus interfaces. + config I2C_PROSAVAGE tristate "S3/VIA (Pro)Savage" depends on I2C && PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 37196c1d0794..03505aa44bbf 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o +obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c new file mode 100644 index 000000000000..f54fb5d65cc4 --- /dev/null +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -0,0 +1,426 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * SMBus host driver for PA Semi PWRficient + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct pci_driver pasemi_smb_driver; + +struct pasemi_smbus { + struct pci_dev *dev; + struct i2c_adapter adapter; + unsigned long base; + int size; +}; + +/* Register offsets */ +#define REG_MTXFIFO 0x00 +#define REG_MRXFIFO 0x04 +#define REG_SMSTA 0x14 +#define REG_CTL 0x1c + +/* Register defs */ +#define MTXFIFO_READ 0x00000400 +#define MTXFIFO_STOP 0x00000200 +#define MTXFIFO_START 0x00000100 +#define MTXFIFO_DATA_M 0x000000ff + +#define MRXFIFO_EMPTY 0x00000100 +#define MRXFIFO_DATA_M 0x000000ff + +#define SMSTA_XEN 0x08000000 + +#define CTL_MRR 0x00000400 +#define CTL_MTR 0x00000200 +#define CTL_CLK_M 0x000000ff + +#define CLK_100K_DIV 84 +#define CLK_400K_DIV 21 + +static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val) +{ + dev_dbg(&smbus->dev->dev, "smbus write reg %lx val %08x\n", + smbus->base + reg, val); + outl(val, smbus->base + reg); +} + +static inline int reg_read(struct pasemi_smbus *smbus, int reg) +{ + int ret; + ret = inl(smbus->base + reg); + dev_dbg(&smbus->dev->dev, "smbus read reg %lx val %08x\n", + smbus->base + reg, ret); + return ret; +} + +#define TXFIFO_WR(smbus, reg) reg_write((smbus), REG_MTXFIFO, (reg)) +#define RXFIFO_RD(smbus) reg_read((smbus), REG_MRXFIFO) + +static void pasemi_smb_clear(struct pasemi_smbus *smbus) +{ + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + reg_write(smbus, REG_SMSTA, status); +} + +static unsigned int pasemi_smb_waitready(struct pasemi_smbus *smbus) +{ + int timeout = 10; + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + + while (!(status & SMSTA_XEN) && timeout--) { + msleep(1); + status = reg_read(smbus, REG_SMSTA); + } + + if (timeout < 0) { + dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status); + reg_write(smbus, REG_SMSTA, status); + return -ETIME; + } + + /* Clear XEN */ + reg_write(smbus, REG_SMSTA, SMSTA_XEN); + + return 0; +} + +static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter, + struct i2c_msg *msg, int stop) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int read, i, err; + u32 rd; + + read = msg->flags & I2C_M_RD ? 1 : 0; + + TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read); + + if (read) { + TXFIFO_WR(smbus, msg->len | MTXFIFO_READ | + (stop ? MTXFIFO_STOP : 0)); + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + for (i = 0; i < msg->len; i++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + msg->buf[i] = rd & MRXFIFO_DATA_M; + } + } else { + for (i = 0; i < msg->len - 1; i++) + TXFIFO_WR(smbus, msg->buf[i]); + + TXFIFO_WR(smbus, msg->buf[msg->len] | + (stop ? MTXFIFO_STOP : 0)); + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static int pasemi_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int ret, i; + + pasemi_smb_clear(smbus); + + ret = 0; + + for (i = 0; i < num && !ret; i++) + ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1))); + + return ret ? ret : num; +} + +static int pasemi_smb_xfer(struct i2c_adapter *adapter, + u16 addr, unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + unsigned int rd; + int read_flag, err; + int len = 0, i; + + /* All our ops take 8-bit shifted addresses */ + addr <<= 1; + read_flag = read_write == I2C_SMBUS_READ; + + pasemi_smb_clear(smbus); + + switch (size) { + case I2C_SMBUS_QUICK: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START | + MTXFIFO_STOP); + break; + case I2C_SMBUS_BYTE: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START); + if (read_write) + TXFIFO_WR(smbus, 1 | MTXFIFO_STOP | MTXFIFO_READ); + else + TXFIFO_WR(smbus, MTXFIFO_STOP | command); + break; + case I2C_SMBUS_BYTE_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, MTXFIFO_STOP | data->byte); + } + break; + case I2C_SMBUS_WORD_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, MTXFIFO_STOP | (data->word >> 8)); + } + break; + case I2C_SMBUS_BLOCK_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | + MTXFIFO_STOP); + } else { + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, len); + for (i = 1; i < len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, data->block[len] | MTXFIFO_STOP); + } + break; + case I2C_SMBUS_PROC_CALL: + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, (data->word >> 8) & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_STOP | MTXFIFO_READ); + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1); + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, len); + for (i = 1; i <= len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ); + TXFIFO_WR(smbus, MTXFIFO_READ | 1); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX - len); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | MTXFIFO_STOP); + break; + + default: + dev_warn(&adapter->dev, "Unsupported transaction %d\n", size); + return -EINVAL; + } + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + if (read_write == I2C_SMBUS_WRITE) + return 0; + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->byte = rd & MRXFIFO_DATA_M; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word = rd & MRXFIFO_DATA_M; + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word |= (rd & MRXFIFO_DATA_M) << 8; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + data->block[0] = len; + for (i = 1; i <= len; i ++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->block[i] = rd & MRXFIFO_DATA_M; + } + break; + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static u32 pasemi_smb_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_I2C; +} + +static const struct i2c_algorithm smbus_algorithm = { + .master_xfer = pasemi_i2c_xfer, + .smbus_xfer = pasemi_smb_xfer, + .functionality = pasemi_smb_func, +}; + +static int __devinit pasemi_smb_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct pasemi_smbus *smbus; + int error; + + if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) + return -ENODEV; + + smbus = kzalloc(sizeof(struct pasemi_smbus), GFP_KERNEL); + if (!smbus) + return -ENOMEM; + + smbus->dev = dev; + smbus->base = pci_resource_start(dev, 0); + smbus->size = pci_resource_len(dev, 0); + + if (!request_region(smbus->base, smbus->size, + pasemi_smb_driver.name)) { + error = -EBUSY; + goto out_kfree; + } + + smbus->adapter.owner = THIS_MODULE; + snprintf(smbus->adapter.name, I2C_NAME_SIZE, + "PA Semi SMBus adapter at 0x%lx", smbus->base); + smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.algo = &smbus_algorithm; + smbus->adapter.algo_data = smbus; + + /* set up the driverfs linkage to our parent device */ + smbus->adapter.dev.parent = &dev->dev; + + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + + error = i2c_add_adapter(&smbus->adapter); + if (error) + goto out_release_region; + + pci_set_drvdata(dev, smbus); + + return 0; + + out_release_region: + release_region(smbus->base, smbus->size); + out_kfree: + kfree(smbus); + return error; +} + +static void __devexit pasemi_smb_remove(struct pci_dev *dev) +{ + struct pasemi_smbus *smbus = pci_get_drvdata(dev); + + i2c_del_adapter(&smbus->adapter); + release_region(smbus->base, smbus->size); + kfree(smbus); +} + +static struct pci_device_id pasemi_smb_ids[] = { + { PCI_DEVICE(0x1959, 0xa003) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, pasemi_smb_ids); + +static struct pci_driver pasemi_smb_driver = { + .name = "i2c-pasemi", + .id_table = pasemi_smb_ids, + .probe = pasemi_smb_probe, + .remove = __devexit_p(pasemi_smb_remove), +}; + +static int __init pasemi_smb_init(void) +{ + return pci_register_driver(&pasemi_smb_driver); +} + +static void __exit pasemi_smb_exit(void) +{ + pci_unregister_driver(&pasemi_smb_driver); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Olof Johansson "); +MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver"); + +module_init(pasemi_smb_init); +module_exit(pasemi_smb_exit); -- 2.30.2