From c312295b5682295915109300c953c277d3fd420c Mon Sep 17 00:00:00 2001 From: Mikhail Zhilkin Date: Sat, 26 Oct 2024 09:37:14 +0000 Subject: [PATCH] mediatek: Routerich AX3000: add OpenWrt U-Boot layout MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This commit adds OpenWrt U-Boot layout support for Routerich AX3000. The aims: 1. Get open-source U-Boot; 2. Get maximum available free space in OpenWrt. Install ------- 1. Copy OpenWrt ubootmod-bl31-uboot.fip, ubootmod-preloader.bin, to the /tmp folder of the router using scp. 2. Make mtd partitions backups: http://192.168.1.1/cgi-bin/luci/admin/system/flash -> Save mtdblock contents 3. Install kmod-mtd-rw: ``` opkg update && opkg install kmod-mtd-rw ``` 4. Write FIP and preloader: ``` insmod mtd-rw i_want_a_brick=1 mtd unlock BL2 mtd erase BL2 mtd write /tmp/ubootmod-preloader.bin BL2 mtd unlock FIP mtd erase FIP mtd write /tmp/ubootmod-bl31-uboot.fip FIP ``` 5. Copy OpenWrt ubootmod-initramfs-recovery.itb to the tftp server root with IP 192.168.1.254. 6. Reboot router: ``` reboot ``` U-Boot will automatically download from the tftp server and boot OpenWrt initramfs system. 7. Copy OpenWrt ubootmod-squashfs-sysupgrade.itb to the /tmp dir of the router using scp. 8. Run sysupgrade: ``` sysupgrade -n /tmp/squashfs-sysupgrade.itb ``` Recovery -------- 1. Place OpenWrt initramfs-recovery.itb image (with original name) on the tftp server (IP: 192.168.1.254). 2. Press "reset" button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery. BL2 and FIP recovery -------------------- Use mtk_uartboot and UART connection if BL2 or FIP in UBI is destroyed: Link: https://github.com/981213/mtk_uartboot Return to stock: ---------------- 1. Copy partition backups (BL2.bin and FIP.bin) to the /tmp dir of the router using scp. 2. Install kmod-mtd-rw: ``` opkg update && opkg install kmod-mtd-rw ``` 3. Restore stock U-Boot and reboot: ``` insmod mtd-rw i_want_a_brick=1 mtd unlock BL2 mtd erase BL2 mtd write /tmp/BL2.bin BL2 mtd unlock FIP mtd erase FIP mtd write /tmp/FIP.bin FIP reboot ``` 4. Open U-Boot web recovery, upload stock firmware image and start upgrade. Link: http://192.168.1.1 Signed-off-by: Mikhail Zhilkin Link: https://github.com/openwrt/openwrt/pull/16791 Signed-off-by: Hauke Mehrtens (cherry picked from commit d413163832df93c321eef3fce8c4f72c350d5308) Link: https://github.com/openwrt/openwrt/pull/17097 Signed-off-by: Petr Å tetiar --- .../uboot-envtools/files/mediatek_filogic | 1 + .../dts/mt7981b-routerich-ax3000-common.dtsi | 302 ++++++++++++++++++ .../dts/mt7981b-routerich-ax3000-ubootmod.dts | 52 +++ .../mediatek/dts/mt7981b-routerich-ax3000.dts | 119 +------ .../filogic/base-files/etc/board.d/01_leds | 3 +- .../filogic/base-files/etc/board.d/02_network | 3 +- .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 1 + .../base-files/lib/upgrade/platform.sh | 1 + target/linux/mediatek/image/filogic.mk | 25 ++ 9 files changed, 400 insertions(+), 107 deletions(-) create mode 100644 target/linux/mediatek/dts/mt7981b-routerich-ax3000-common.dtsi create mode 100644 target/linux/mediatek/dts/mt7981b-routerich-ax3000-ubootmod.dts diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index b637f43287..58db7dad28 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -39,6 +39,7 @@ jcg,q30-pro|\ netcore,n60|\ nokia,ea0326gmp|\ qihoo,360t7|\ +routerich,ax3000-ubootmod|\ tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088|\ diff --git a/target/linux/mediatek/dts/mt7981b-routerich-ax3000-common.dtsi b/target/linux/mediatek/dts/mt7981b-routerich-ax3000-common.dtsi new file mode 100644 index 0000000000..f0b0b9365b --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-routerich-ax3000-common.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include +#include +#include + +#include "mt7981.dtsi" + +/ { + aliases { + label-mac-device = &wan; + + led-boot = &led_power_blue; + led-failsafe = &led_power_blue; + led-running = &led_power_blue; + led-upgrade = &led_power_blue; + + serial0 = &uart0; + }; + + chosen: chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "mesh"; + linux,input-type = ; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + button-1 { + label = "reset"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_WLAN; + function-enumerator = <50>; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led-1 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 6 GPIO_ACTIVE_HIGH>; + }; + + led_power_blue: led-2 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-4 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + + led-6 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + }; + + led-7 { + color = ; + function = LED_FUNCTION_WLAN; + function-enumerator = <24>; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-8 { + color = ; + /* LED_FUNCTION_MESH isn't implemented yet */ + function = "mesh"; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + }; + }; + + memory { + reg = <0 0x40000000 0 0x10000000>; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4 (-1)>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <0x1f>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + /* ESMT F50L1G41LB (128M) */ + spi: spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0_all { + label = "spi0.0"; + reg = <0x0 0x8000000>; + read-only; + }; + + partition@0 { + label = "BL2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + wan: port@4 { + reg = <4>; + label = "wan"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4 (-2)>; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + nvmem-cell-names = "eeprom"; + nvmem-cells = <&eeprom_factory_0>; +}; + +&xhci { + status = "okay"; + mediatek,u3p-dis-msk = <0x1>; +}; diff --git a/target/linux/mediatek/dts/mt7981b-routerich-ax3000-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-routerich-ax3000-ubootmod.dts new file mode 100644 index 0000000000..dfdb78936d --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-routerich-ax3000-ubootmod.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +#include "mt7981b-routerich-ax3000-common.dtsi" + +/ { + model = "Routerich AX3000 (OpenWrt U-Boot layout)"; + compatible = "routerich,ax3000-ubootmod", "mediatek,mt7981"; +}; + +&chosen { + rootdisk = <&ubi_fit_volume>; +}; + +&partitions { + partition@100000 { + label = "u-boot-env-orig"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7a80000>; + compatible = "linux,ubi"; + + volumes { + ubi_fit_volume: ubi-volume-fit { + volname = "fit"; + }; + + ubi_ubootenv: ubi-volume-ubootenv { + volname = "ubootenv"; + }; + + ubi_ubootenv2: ubi-volume-ubootenv2 { + volname = "ubootenv2"; + }; + }; + }; +}; + +&ubi_ubootenv { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; + +&ubi_ubootenv2 { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; diff --git a/target/linux/mediatek/dts/mt7981b-routerich-ax3000.dts b/target/linux/mediatek/dts/mt7981b-routerich-ax3000.dts index aa6a15ee1d..c0a10b3fc8 100644 --- a/target/linux/mediatek/dts/mt7981b-routerich-ax3000.dts +++ b/target/linux/mediatek/dts/mt7981b-routerich-ax3000.dts @@ -1,118 +1,27 @@ // SPDX-License-Identifier: GPL-2.0-only OR MIT -/dts-v1/; -#include -#include -#include - -#include "mt7981.dtsi" +#include "mt7981b-routerich-ax3000-common.dtsi" / { model = "Routerich AX3000"; compatible = "routerich,ax3000", "mediatek,mt7981"; +}; - aliases { - label-mac-device = &wan; - - led-boot = &led_power_blue; - led-failsafe = &led_power_blue; - led-running = &led_power_blue; - led-upgrade = &led_power_blue; - - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - button-0 { - label = "mesh"; - linux,input-type = ; - linux,code = ; - gpios = <&pio 0 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button-1 { - label = "reset"; - gpios = <&pio 1 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - color = ; - function = LED_FUNCTION_WLAN; - function-enumerator = <50>; - gpios = <&pio 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - led-1 { - color = ; - function = LED_FUNCTION_WAN; - gpios = <&pio 6 GPIO_ACTIVE_HIGH>; - }; - - led_power_blue: led-2 { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&pio 7 GPIO_ACTIVE_LOW>; - }; - - led-3 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - gpios = <&pio 9 GPIO_ACTIVE_LOW>; - }; - - led-4 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - gpios = <&pio 10 GPIO_ACTIVE_LOW>; - }; - - led-5 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - gpios = <&pio 11 GPIO_ACTIVE_LOW>; - }; - - led-6 { - color = ; - function = LED_FUNCTION_WAN; - gpios = <&pio 12 GPIO_ACTIVE_LOW>; - }; - - led-7 { - color = ; - function = LED_FUNCTION_WLAN; - function-enumerator = <24>; - gpios = <&pio 34 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; +&spi { + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; +}; - led-8 { - color = ; - /* LED_FUNCTION_MESH isn't implemented yet */ - function = "mesh"; - gpios = <&pio 35 GPIO_ACTIVE_LOW>; - }; +&partitions { + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; }; - memory { - reg = <0 0x40000000 0 0x10000000>; + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7000000>; }; }; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index dad5c293de..38c4b7525b 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -75,7 +75,8 @@ openwrt,one) ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx" ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link" ;; -routerich,ax3000) +routerich,ax3000|\ +routerich,ax3000-ubootmod) ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx" ucidef_set_led_netdev "lan-3" "lan-3" "blue:lan-3" "lan3" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 7bfc61a269..1480dbcbc7 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -34,7 +34,8 @@ mediatek_setup_interfaces() cudy,wr3000-v1|\ jcg,q30-pro|\ qihoo,360t7|\ - routerich,ax3000) + routerich,ax3000|\ + routerich,ax3000-ubootmod) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan ;; asus,tuf-ax4200|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 7402bfc71b..5e83a167de 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -158,6 +158,7 @@ case "$board" in [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress ;; routerich,ax3000|\ + routerich,ax3000-ubootmod|\ zbtlink,zbt-z8102ax|\ zbtlink,zbt-z8103ax|\ zyxel,ex5601-t0|\ diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index ce334b2c8e..0040ffbb26 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -80,6 +80,7 @@ platform_do_upgrade() { openwrt,one|\ netcore,n60|\ qihoo,360t7|\ + routerich,ax3000-ubootmod|\ tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index f366a9b920..672790f1a7 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1228,6 +1228,31 @@ define Device/routerich_ax3000 endef TARGET_DEVICES += routerich_ax3000 +define Device/routerich_ax3000-ubootmod + DEVICE_VENDOR := Routerich + DEVICE_MODEL := AX3000 (OpenWrt U-Boot layout) + DEVICE_DTS := mt7981b-routerich-ax3000-ubootmod + DEVICE_DTS_DIR := ../dts + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \ + append-metadata + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 mt7981-wo-firmware + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot routerich_ax3000 +endef +TARGET_DEVICES += routerich_ax3000-ubootmod + define Device/ruijie_rg-x60-pro DEVICE_VENDOR := Ruijie DEVICE_MODEL := RG-X60 Pro -- 2.30.2