From c3ed3877625f10d600b0eca2ca48a68c46aed660 Mon Sep 17 00:00:00 2001 From: Arindam Nath Date: Thu, 5 May 2011 12:19:06 +0530 Subject: [PATCH] mmc: sdhci: add support for programmable clock mode Host Controller v3.00 supports programmable clock mode as an optional feature. The support for this mode is indicated by non-zero value in bits 48-55 of the Capabilities register. If supported, the actual value of Clock Multiplier is one more than the value provided in the bit fields. We only set Clock Generator Select (bit 5) and SDCLK Frequency Select (bits 8-15) of the Clock Control register in case Preset Value Enable is not set, otherwise these fields are automatically set by the Host Controller based on the UHS mode selected. Also, since the maximum and minimum clock frequency in this mode can be (Base Clock * Clock Mul) and (Base Clock * Clock Mul)/1024 respectively, f_max and f_min have been recalculated to reflect this change. Tested by Zhangfei Gao with a Toshiba uhs card and general hs card, on mmp2 in SDMA mode. Signed-off-by: Arindam Nath Reviewed-by: Philip Rakity Tested-by: Philip Rakity Acked-by: Zhangfei Gao Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 81 +++++++++++++++++++++++++++++++-------- drivers/mmc/host/sdhci.h | 3 ++ include/linux/mmc/sdhci.h | 1 + 3 files changed, 70 insertions(+), 15 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index a1ab22415883..07cca557c4b5 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1013,8 +1013,8 @@ static void sdhci_finish_command(struct sdhci_host *host) static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { - int div; - u16 clk; + int div = 0; /* Initialized for compiler warning */ + u16 clk = 0; unsigned long timeout; if (clock == host->clock) @@ -1032,14 +1032,45 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) goto out; if (host->version >= SDHCI_SPEC_300) { - /* Version 3.00 divisors must be a multiple of 2. */ - if (host->max_clk <= clock) - div = 1; - else { - for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) { - if ((host->max_clk / div) <= clock) - break; + /* + * Check if the Host Controller supports Programmable Clock + * Mode. + */ + if (host->clk_mul) { + u16 ctrl; + + /* + * We need to figure out whether the Host Driver needs + * to select Programmable Clock Mode, or the value can + * be set automatically by the Host Controller based on + * the Preset Value registers. + */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) { + for (div = 1; div <= 1024; div++) { + if (((host->max_clk * host->clk_mul) / + div) <= clock) + break; + } + /* + * Set Programmable Clock Mode in the Clock + * Control register. + */ + clk = SDHCI_PROG_CLOCK_MODE; + div--; + } + } else { + /* Version 3.00 divisors must be a multiple of 2. */ + if (host->max_clk <= clock) + div = 1; + else { + for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; + div += 2) { + if ((host->max_clk / div) <= clock) + break; + } } + div >>= 1; } } else { /* Version 2.00 divisors must be a power of 2. */ @@ -1047,10 +1078,10 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) if ((host->max_clk / div) <= clock) break; } + div >>= 1; } - div >>= 1; - clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; + clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) << SDHCI_DIVIDER_HI_SHIFT; clk |= SDHCI_CLOCK_INT_EN; @@ -2307,18 +2338,38 @@ int sdhci_add_host(struct sdhci_host *host) if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; + /* + * In case of Host Controller v3.00, find out whether clock + * multiplier is supported. + */ + host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >> + SDHCI_CLOCK_MUL_SHIFT; + + /* + * In case the value in Clock Multiplier is 0, then programmable + * clock mode is not supported, otherwise the actual clock + * multiplier is one more than the value of Clock Multiplier + * in the Capabilities Register. + */ + if (host->clk_mul) + host->clk_mul += 1; + /* * Set host parameters. */ mmc->ops = &sdhci_ops; + mmc->f_max = host->max_clk; if (host->ops->get_min_clock) mmc->f_min = host->ops->get_min_clock(host); - else if (host->version >= SDHCI_SPEC_300) - mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; - else + else if (host->version >= SDHCI_SPEC_300) { + if (host->clk_mul) { + mmc->f_min = (host->max_clk * host->clk_mul) / 1024; + mmc->f_max = host->max_clk * host->clk_mul; + } else + mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; + } else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; - mmc->f_max = host->max_clk; mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE; /* diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index e62367491eee..6b0a0ee9ac6e 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -101,6 +101,7 @@ #define SDHCI_DIV_MASK 0xFF #define SDHCI_DIV_MASK_LEN 8 #define SDHCI_DIV_HI_MASK 0x300 +#define SDHCI_PROG_CLOCK_MODE 0x0020 #define SDHCI_CLOCK_CARD_EN 0x0004 #define SDHCI_CLOCK_INT_STABLE 0x0002 #define SDHCI_CLOCK_INT_EN 0x0001 @@ -191,6 +192,8 @@ #define SDHCI_DRIVER_TYPE_C 0x00000020 #define SDHCI_DRIVER_TYPE_D 0x00000040 #define SDHCI_USE_SDR50_TUNING 0x00002000 +#define SDHCI_CLOCK_MUL_MASK 0x00FF0000 +#define SDHCI_CLOCK_MUL_SHIFT 16 #define SDHCI_CAPABILITIES_1 0x44 diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index b74c8530e959..a88a799ed7c3 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -117,6 +117,7 @@ struct sdhci_host { unsigned int max_clk; /* Max possible freq (MHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */ + unsigned int clk_mul; /* Clock Muliplier value */ unsigned int clock; /* Current clock (MHz) */ u8 pwr; /* Current voltage */ -- 2.30.2