From c5a7dc49d11810838af9eafdddadf92a3b8218aa Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Fri, 21 Apr 2017 00:53:03 +0200
Subject: [PATCH] ramips: split Phicomm PSG1218 and PSG1218K2C

PSG1218 got only 4 Ethernet ports and WAN on port 3 while
PSG1218K2C got 5 Ethernet ports and WAN on port 4
Switch to use kmod-kt76x2 instead of kmod-mt76 for both devices while
at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 .../ramips/base-files/etc/board.d/01_leds     |  3 +-
 .../ramips/base-files/etc/board.d/02_network  |  6 +-
 target/linux/ramips/base-files/etc/diag.sh    |  3 +-
 target/linux/ramips/base-files/lib/ramips.sh  |  3 +
 .../ramips/base-files/lib/upgrade/platform.sh |  1 +
 target/linux/ramips/dts/PSG1218.dts           | 83 +------------------
 target/linux/ramips/dts/PSG1218.dtsi          | 74 +++++++++++++++++
 target/linux/ramips/dts/PSG1218K2C.dts        | 47 +++++++++++
 target/linux/ramips/image/mt7620.mk           |  9 +-
 9 files changed, 145 insertions(+), 84 deletions(-)
 create mode 100644 target/linux/ramips/dts/PSG1218.dtsi
 create mode 100644 target/linux/ramips/dts/PSG1218K2C.dts

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 4073d803f2..2c44a83f28 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -287,7 +287,8 @@ pbr-m1)
 psg1208)
 	set_wifi_led "$board:white:wlan2g"
 	;;
-psg1218)
+psg1218\|
+psg1218k2c)
 	ucidef_set_led_netdev "Network" "Network" "$board:blue:status" "eth0"
 	ucidef_set_led_default "status" "STATUS" "$board:yellow:status" "0"
 	;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7bdebbe97f..b2966c26da 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -95,7 +95,7 @@ ramips_setup_interfaces()
 	oy-0001|\
 	pbr-m1|\
 	psg1208|\
-	psg1218|\
+	psg1218k2c|\
 	r6220|\
 	sap-g3200u3|\
 	sk-wb8|\
@@ -115,6 +115,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
+	psg1218)
+		ucidef_add_switch "switch0" \
+			"0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
+		;;
 	whr-300hp2|\
 	whr-600d|\
 	wsr-1166|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 3dbf87ac5d..af18264f99 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -104,7 +104,8 @@ get_status_led() {
 	psg1208)
 		status_led="$board:white:wps"
 		;;
-	psg1218)
+	psg1218|\
+	psg1218k2c)
 		status_led="$board:yellow:status"
 		;;
 	cy-swr1100|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 786aecb99b..a75f5208a3 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -400,6 +400,9 @@ ramips_board_detect() {
 	*"PSG1218")
 		name="psg1218"
 		;;
+	*"PSG1218K2C")
+		name="psg1218k2c"
+		;;
 	*"PSR-680W"*)
 		name="psr-680w"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 08fa45ad98..827109b59e 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -113,6 +113,7 @@ platform_check_image() {
 	pbr-m1|\
 	psg1208|\
 	psg1218|\
+	psg1218k2c|\
 	psr-680w|\
 	px-4885|\
 	rb750gr3|\
diff --git a/target/linux/ramips/dts/PSG1218.dts b/target/linux/ramips/dts/PSG1218.dts
index 1e53dcef3d..0492d65502 100644
--- a/target/linux/ramips/dts/PSG1218.dts
+++ b/target/linux/ramips/dts/PSG1218.dts
@@ -1,8 +1,6 @@
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
+#include "PSG1218.dtsi"
 
 / {
 	compatible = "PSG1218", "ralink,mt7620a-soc";
@@ -10,7 +8,6 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
-
 		blue {
 			label = "psg1218:blue:status";
 			gpios = <&gpio0 10 1>;
@@ -23,59 +20,7 @@
 
 		red {
 			label = "psg1218:red:status";
-			gpios = <&gpio0 8 0>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 1>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@20000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@30000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "firmware";
-			reg = <0x50000 0x7b0000>;
+				gpios = <&gpio0 8 0>;
 		};
 	};
 };
@@ -83,14 +28,9 @@
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
-			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
 			ralink,function = "gpio";
 		};
-
-		pa {
-			ralink,group = "pa";
-			ralink,function = "pa";
-		};
 	};
 };
 
@@ -100,20 +40,3 @@
 	mtd-mac-address = <&factory 0x28>;
 	mediatek,portmap = "llllw";
 };
-
-&pcie {
-	status = "okay";
-
-	pcie-bridge {
-		mt76@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			mediatek,mtd-eeprom = <&factory 0x8000>;
-			ieee80211-freq-limit = <5000000 6000000>;
-		};
-	};
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-};
diff --git a/target/linux/ramips/dts/PSG1218.dtsi b/target/linux/ramips/dts/PSG1218.dtsi
new file mode 100644
index 0000000000..b3b58948d2
--- /dev/null
+++ b/target/linux/ramips/dts/PSG1218.dtsi
@@ -0,0 +1,74 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@20000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@30000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "firmware";
+			reg = <0x50000 0x7b0000>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	pcie-bridge {
+		mt76@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&factory 0x8000>;
+			ieee80211-freq-limit = <5000000 6000000>;
+		};
+	};
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
diff --git a/target/linux/ramips/dts/PSG1218K2C.dts b/target/linux/ramips/dts/PSG1218K2C.dts
new file mode 100644
index 0000000000..d8105b9a22
--- /dev/null
+++ b/target/linux/ramips/dts/PSG1218K2C.dts
@@ -0,0 +1,47 @@
+/dts-v1/;
+
+#include "PSG1218.dtsi"
+
+/ {
+	compatible = "PSG1218K2C", "ralink,mt7620a-soc";
+	model = "Phicomm PSG1218K2C";
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "psg1218k2c:blue:status";
+			gpios = <&gpio0 10 1>;
+		};
+
+		yellow {
+			label = "psg1218k2c:yellow:status";
+			gpios = <&gpio0 11 1>;
+		};
+
+		red {
+			label = "psg1218k2c:red:status";
+				gpios = <&gpio0 8 0>;
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+			ralink,function = "gpio";
+		};
+
+		pa {
+			ralink,group = "pa";
+			ralink,function = "pa";
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+	mtd-mac-address = <&factory 0x28>;
+	mediatek,portmap = "llllw";
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 016e5acc59..63d5a7c00a 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -325,10 +325,17 @@ TARGET_DEVICES += psg1208
 define Device/psg1218
   DTS := PSG1218
   DEVICE_TITLE := Phicomm PSG1218
-  DEVICE_PACKAGES := kmod-mt76
+  DEVICE_PACKAGES := kmod-mt76x2
 endef
 TARGET_DEVICES += psg1218
 
+define Device/psg1218k2c
+  DTS := PSG1218K2C
+  DEVICE_TITLE := Phicomm PSG1218K2C
+  DEVICE_PACKAGES := kmod-mt76x2
+endef
+TARGET_DEVICES += psg1218k2c
+
 define Device/rp-n53
   DTS := RP-N53
   DEVICE_TITLE := Asus RP-N53
-- 
2.30.2