From c729429e0c3d9c68872c4d1b72c8fadb377cfba2 Mon Sep 17 00:00:00 2001 From: Wei Ni Date: Fri, 21 Sep 2012 16:54:58 +0800 Subject: [PATCH] ARM: dt: t20 ventana: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller, which is connectted to the WiFi module. Signed-off-by: Wei Ni Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-ventana.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 86854f1abd58..bec8bb297ad8 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -237,6 +237,16 @@ "ld23_22"; nvidia,pull = <1>; }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <3>; + nvidia,slew-rate-falling = <3>; + }; }; }; @@ -425,6 +435,12 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + bus-width = <4>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ -- 2.30.2