From cb10c7c0dfd9e6fd3d69ced98b05cbd198c48cf6 Mon Sep 17 00:00:00 2001 From: Vijay Khemka Date: Tue, 16 Oct 2018 12:13:19 -0700 Subject: [PATCH] net/ncsi: Add NCSI Broadcom OEM command This patch adds OEM Broadcom commands and response handling. It also defines OEM Get MAC Address handler to get and configure the device. ncsi_oem_gma_handler_bcm: This handler send NCSI broadcom command for getting mac address. ncsi_rsp_handler_oem_bcm: This handles response received for all broadcom OEM commands. ncsi_rsp_handler_oem_bcm_gma: This handles get mac address response and set it to device. Signed-off-by: Vijay Khemka Reviewed-by: Samuel Mendoza-Jonas Signed-off-by: David S. Miller --- net/ncsi/Kconfig | 6 ++++ net/ncsi/internal.h | 9 +++++ net/ncsi/ncsi-manage.c | 82 ++++++++++++++++++++++++++++++++++++++++++ net/ncsi/ncsi-pkt.h | 8 +++++ net/ncsi/ncsi-rsp.c | 44 +++++++++++++++++++++-- 5 files changed, 147 insertions(+), 2 deletions(-) diff --git a/net/ncsi/Kconfig b/net/ncsi/Kconfig index 08a8a6031fd7..7f2b46108a24 100644 --- a/net/ncsi/Kconfig +++ b/net/ncsi/Kconfig @@ -10,3 +10,9 @@ config NET_NCSI support. Enable this only if your system connects to a network device via NCSI and the ethernet driver you're using supports the protocol explicitly. +config NCSI_OEM_CMD_GET_MAC + bool "Get NCSI OEM MAC Address" + depends on NET_NCSI + ---help--- + This allows to get MAC address from NCSI firmware and set them back to + controller. diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h index 13c9b5eeb3b7..1dae77c54009 100644 --- a/net/ncsi/internal.h +++ b/net/ncsi/internal.h @@ -71,6 +71,13 @@ enum { /* OEM Vendor Manufacture ID */ #define NCSI_OEM_MFR_MLX_ID 0x8119 #define NCSI_OEM_MFR_BCM_ID 0x113d +/* Broadcom specific OEM Command */ +#define NCSI_OEM_BCM_CMD_GMA 0x01 /* CMD ID for Get MAC */ +/* OEM Command payload lengths*/ +#define NCSI_OEM_BCM_CMD_GMA_LEN 12 +/* Mac address offset in OEM response */ +#define BCM_MAC_ADDR_OFFSET 28 + struct ncsi_channel_version { u32 version; /* Supported BCD encoded NCSI version */ @@ -246,6 +253,7 @@ enum { ncsi_dev_state_probe_dp, ncsi_dev_state_config_sp = 0x0301, ncsi_dev_state_config_cis, + ncsi_dev_state_config_oem_gma, ncsi_dev_state_config_clear_vids, ncsi_dev_state_config_svf, ncsi_dev_state_config_ev, @@ -279,6 +287,7 @@ struct ncsi_dev_priv { #define NCSI_DEV_PROBED 1 /* Finalized NCSI topology */ #define NCSI_DEV_HWA 2 /* Enabled HW arbitration */ #define NCSI_DEV_RESHUFFLE 4 + unsigned int gma_flag; /* OEM GMA flag */ spinlock_t lock; /* Protect the NCSI device */ #if IS_ENABLED(CONFIG_IPV6) unsigned int inet6_addr_num; /* Number of IPv6 addresses */ diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c index 6aa0614d2d28..bfc43b28c7a6 100644 --- a/net/ncsi/ncsi-manage.c +++ b/net/ncsi/ncsi-manage.c @@ -651,6 +651,72 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc, return 0; } +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) + +/* NCSI OEM Command APIs */ +static int ncsi_oem_gma_handler_bcm(struct ncsi_cmd_arg *nca) +{ + unsigned char data[NCSI_OEM_BCM_CMD_GMA_LEN]; + int ret = 0; + + nca->payload = NCSI_OEM_BCM_CMD_GMA_LEN; + + memset(data, 0, NCSI_OEM_BCM_CMD_GMA_LEN); + *(unsigned int *)data = ntohl(NCSI_OEM_MFR_BCM_ID); + data[5] = NCSI_OEM_BCM_CMD_GMA; + + nca->data = data; + + ret = ncsi_xmit_cmd(nca); + if (ret) + netdev_err(nca->ndp->ndev.dev, + "NCSI: Failed to transmit cmd 0x%x during configure\n", + nca->type); + return ret; +} + +/* OEM Command handlers initialization */ +static struct ncsi_oem_gma_handler { + unsigned int mfr_id; + int (*handler)(struct ncsi_cmd_arg *nca); +} ncsi_oem_gma_handlers[] = { + { NCSI_OEM_MFR_BCM_ID, ncsi_oem_gma_handler_bcm } +}; + +static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id) +{ + struct ncsi_oem_gma_handler *nch = NULL; + int i; + + /* This function should only be called once, return if flag set */ + if (nca->ndp->gma_flag == 1) + return -1; + + /* Find gma handler for given manufacturer id */ + for (i = 0; i < ARRAY_SIZE(ncsi_oem_gma_handlers); i++) { + if (ncsi_oem_gma_handlers[i].mfr_id == mf_id) { + if (ncsi_oem_gma_handlers[i].handler) + nch = &ncsi_oem_gma_handlers[i]; + break; + } + } + + if (!nch) { + netdev_err(nca->ndp->ndev.dev, + "NCSI: No GMA handler available for MFR-ID (0x%x)\n", + mf_id); + return -1; + } + + /* Set the flag for GMA command which should only be called once */ + nca->ndp->gma_flag = 1; + + /* Get Mac address from NCSI device */ + return nch->handler(nca); +} + +#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */ + static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) { struct ncsi_dev *nd = &ndp->ndev; @@ -701,7 +767,23 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) goto error; } + nd->state = ncsi_dev_state_config_oem_gma; + break; + case ncsi_dev_state_config_oem_gma: nd->state = ncsi_dev_state_config_clear_vids; + ret = -1; + +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) + nca.type = NCSI_PKT_CMD_OEM; + nca.package = np->id; + nca.channel = nc->id; + ndp->pending_req_num = 1; + ret = ncsi_gma_handler(&nca, nc->version.mf_id); +#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */ + + if (ret < 0) + schedule_work(&ndp->work); + break; case ncsi_dev_state_config_clear_vids: case ncsi_dev_state_config_svf: diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h index 0f2087c8d42a..4d3f06be38bd 100644 --- a/net/ncsi/ncsi-pkt.h +++ b/net/ncsi/ncsi-pkt.h @@ -165,6 +165,14 @@ struct ncsi_rsp_oem_pkt { unsigned char data[]; /* Payload data */ }; +/* Broadcom Response Data */ +struct ncsi_rsp_oem_bcm_pkt { + unsigned char ver; /* Payload Version */ + unsigned char type; /* OEM Command type */ + __be16 len; /* Payload Length */ + unsigned char data[]; /* Cmd specific Data */ +}; + /* Get Link Status */ struct ncsi_rsp_gls_pkt { struct ncsi_rsp_pkt_hdr rsp; /* Response header */ diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c index 85fa59afae34..77e07ba3f493 100644 --- a/net/ncsi/ncsi-rsp.c +++ b/net/ncsi/ncsi-rsp.c @@ -611,19 +611,59 @@ static int ncsi_rsp_handler_snfc(struct ncsi_request *nr) return 0; } +/* Response handler for Broadcom command Get Mac Address */ +static int ncsi_rsp_handler_oem_bcm_gma(struct ncsi_request *nr) +{ + struct ncsi_dev_priv *ndp = nr->ndp; + struct net_device *ndev = ndp->ndev.dev; + const struct net_device_ops *ops = ndev->netdev_ops; + struct ncsi_rsp_oem_pkt *rsp; + struct sockaddr saddr; + int ret = 0; + + /* Get the response header */ + rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp); + + saddr.sa_family = ndev->type; + ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE; + memcpy(saddr.sa_data, &rsp->data[BCM_MAC_ADDR_OFFSET], ETH_ALEN); + /* Increase mac address by 1 for BMC's address */ + saddr.sa_data[ETH_ALEN - 1]++; + ret = ops->ndo_set_mac_address(ndev, &saddr); + if (ret < 0) + netdev_warn(ndev, "NCSI: 'Writing mac address to device failed\n"); + + return ret; +} + +/* Response handler for Broadcom card */ +static int ncsi_rsp_handler_oem_bcm(struct ncsi_request *nr) +{ + struct ncsi_rsp_oem_bcm_pkt *bcm; + struct ncsi_rsp_oem_pkt *rsp; + + /* Get the response header */ + rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp); + bcm = (struct ncsi_rsp_oem_bcm_pkt *)(rsp->data); + + if (bcm->type == NCSI_OEM_BCM_CMD_GMA) + return ncsi_rsp_handler_oem_bcm_gma(nr); + return 0; +} + static struct ncsi_rsp_oem_handler { unsigned int mfr_id; int (*handler)(struct ncsi_request *nr); } ncsi_rsp_oem_handlers[] = { { NCSI_OEM_MFR_MLX_ID, NULL }, - { NCSI_OEM_MFR_BCM_ID, NULL } + { NCSI_OEM_MFR_BCM_ID, ncsi_rsp_handler_oem_bcm } }; /* Response handler for OEM command */ static int ncsi_rsp_handler_oem(struct ncsi_request *nr) { - struct ncsi_rsp_oem_pkt *rsp; struct ncsi_rsp_oem_handler *nrh = NULL; + struct ncsi_rsp_oem_pkt *rsp; unsigned int mfr_id, i; /* Get the response header */ -- 2.30.2