From d2ca8481941efca3300227f0a60003af21ad2895 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 21 Jan 2013 11:57:20 +0000 Subject: [PATCH] isdn/gigaset: leave DLE mode before hanging up Some firmware releases of Gigaset M105 do not accept AT+VLS=0 command in DLE mode, so always leave DLE mode before sending the command. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller --- drivers/isdn/gigaset/ev-layer.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c index 2e6963dc740e..e2383ece8e2e 100644 --- a/drivers/isdn/gigaset/ev-layer.c +++ b/drivers/isdn/gigaset/ev-layer.c @@ -1693,6 +1693,11 @@ static void process_command_flags(struct cardstate *cs) for (i = 0; i < cs->channels; ++i) { bcs = cs->bcs + i; if (bcs->at_state.pending_commands & PC_HUP) { + if (cs->dle) { + cs->curchannel = bcs->channel; + schedule_sequence(cs, &cs->at_state, SEQ_DLE0); + return; + } bcs->at_state.pending_commands &= ~PC_HUP; if (bcs->at_state.pending_commands & PC_CID) { /* not yet dialing: PC_NOCID is sufficient */ -- 2.30.2