From d82e233cee26ceacb9feb937a21bfb61b1826860 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 12 Feb 2018 20:46:29 +0100 Subject: [PATCH] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" Redoing the charger type detection to give the usb-role-switch code time to properly set the role-switch is no good for mainline, since the usb-role-switch code is not yet in mainline (my bad, sorry). Also once we've that code there are better ways to fix this which are not prone to racing as doing a retry after 2 seconds is. This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd. Signed-off-by: Hans de Goede Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-axp288.c | 32 ++------------------------------ 1 file changed, 2 insertions(+), 30 deletions(-) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index c8f7b6435679..3ec4c715e240 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -1,7 +1,6 @@ /* * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver * - * Copyright (C) 2016-2017 Hans de Goede * Copyright (C) 2015 Intel Corporation * Author: Ramakrishna Pallala * @@ -98,11 +97,9 @@ struct axp288_extcon_info { struct device *dev; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; - struct delayed_work det_work; int irq[EXTCON_IRQ_END]; struct extcon_dev *edev; unsigned int previous_cable; - bool first_detect_done; }; /* Power up/down reason string array */ @@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask); } -static void axp288_chrg_detect_complete(struct axp288_extcon_info *info) -{ - /* - * We depend on other drivers to do things like mux the data lines, - * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has - * not set these things up correctly resulting in the initial charger - * cable type detection giving a wrong result and we end up not charging - * or charging at only 0.5A. - * - * So we schedule a second cable type detection after 2 seconds to - * give the other drivers time to load and do their thing. - */ - if (!info->first_detect_done) { - queue_delayed_work(system_wq, &info->det_work, - msecs_to_jiffies(2000)); - info->first_detect_done = true; - } -} - static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) { int ret, stat, cfg, pwr_stat; @@ -223,8 +201,6 @@ no_vbus: info->previous_cable = cable; } - axp288_chrg_detect_complete(info); - return 0; dev_det_ret: @@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data) return IRQ_HANDLED; } -static void axp288_extcon_det_work(struct work_struct *work) +static void axp288_extcon_enable(struct axp288_extcon_info *info) { - struct axp288_extcon_info *info = - container_of(work, struct axp288_extcon_info, det_work.work); - regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, BC_GLOBAL_RUN, 0); /* Enable the charger detection logic */ @@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev) info->regmap = axp20x->regmap; info->regmap_irqc = axp20x->regmap_irqc; info->previous_cable = EXTCON_NONE; - INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work); platform_set_drvdata(pdev, info); @@ -318,7 +290,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) } /* Start charger cable type detection */ - queue_delayed_work(system_wq, &info->det_work, 0); + axp288_extcon_enable(info); return 0; } -- 2.30.2