From d8ebfed3f11b62ebc192af3cab64d835ff047e74 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 19 Sep 2014 13:07:56 -0700 Subject: [PATCH] net: phy: bcm7xxx: utilize PHY revision in config_init Now that the GENET and SF2 drivers have been updated to communicate us what is the revision of the BCM7xxx integrated PHY, utilize that information in the config_init() callback to call into the appropriate workaround function based on our revision. While at it, we also print the revision and patch level to help debug new chips. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm7xxx.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index be3a591aabba..daae69950925 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -196,13 +196,22 @@ static int bcm7xxx_eee_enable(struct phy_device *phydev) static int bcm7xxx_28nm_config_init(struct phy_device *phydev) { - int ret; - - ret = bcm7445_config_init(phydev); - if (ret) - return ret; + u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); + u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags); + int ret = 0; + + dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch); + + switch (rev) { + case 0xa0: + case 0xb0: + ret = bcm7445_config_init(phydev); + break; + default: + ret = bcm7xxx_28nm_afe_config_init(phydev); + break; + } - ret = bcm7xxx_28nm_afe_config_init(phydev); if (ret) return ret; -- 2.30.2