From d9b5e9c6bccc3850b91ddaac11b49f2510375f5b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 10 Nov 2011 16:14:04 +0000 Subject: [PATCH] ASoC: Move WM5100 platform data based setup into I2C probe Get things configured as early as possible, especially useful for the GPIOs which might be useful anyway. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5100.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 0077086d8e5b..f37d67f4058b 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2467,24 +2467,6 @@ static int wm5100_probe(struct snd_soc_codec *codec) snd_soc_update_bits(codec, wm5100_dig_vu[i], WM5100_OUT_VU, WM5100_OUT_VU); - for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) { - snd_soc_update_bits(codec, WM5100_IN1L_CONTROL, - WM5100_IN1_MODE_MASK | - WM5100_IN1_DMIC_SUP_MASK, - (wm5100->pdata.in_mode[i] << - WM5100_IN1_MODE_SHIFT) | - (wm5100->pdata.dmic_sup[i] << - WM5100_IN1_DMIC_SUP_SHIFT)); - } - - for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) { - if (!wm5100->pdata.gpio_defaults[i]) - continue; - - snd_soc_write(codec, WM5100_GPIO_CTRL_1 + i, - wm5100->pdata.gpio_defaults[i]); - } - /* Don't debounce interrupts to support use of SYSCLK only */ snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_1, 0); snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_2, 0); @@ -2739,6 +2721,24 @@ static __devinit int wm5100_i2c_probe(struct i2c_client *i2c, wm5100_init_gpio(i2c); + for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) { + if (!wm5100->pdata.gpio_defaults[i]) + continue; + + regmap_write(wm5100->regmap, WM5100_GPIO_CTRL_1 + i, + wm5100->pdata.gpio_defaults[i]); + } + + for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) { + regmap_update_bits(wm5100->regmap, WM5100_IN1L_CONTROL, + WM5100_IN1_MODE_MASK | + WM5100_IN1_DMIC_SUP_MASK, + (wm5100->pdata.in_mode[i] << + WM5100_IN1_MODE_SHIFT) | + (wm5100->pdata.dmic_sup[i] << + WM5100_IN1_DMIC_SUP_SHIFT)); + } + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm5100, wm5100_dai, ARRAY_SIZE(wm5100_dai)); -- 2.30.2