From da169f5df2764a6a937cb3b07562e269edfb1c0e Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 24 Sep 2010 15:54:43 +0200 Subject: [PATCH] oprofile, x86: Add support for 6 counters (AMD family 15h) This patch adds support for up to 6 hardware counters for AMD family 15h cpus. There is a new MSR range for hardware counters beginning at MSRC001_0200 Performance Event Select (PERF_CTL0). Signed-off-by: Robert Richter --- arch/x86/include/asm/msr-index.h | 4 +++ arch/x86/oprofile/op_model_amd.c | 54 +++++++++++++++++++++----------- 2 files changed, 40 insertions(+), 18 deletions(-) diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 6b89f5e86021..86030f63ba02 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -123,6 +123,10 @@ #define MSR_AMD64_IBSCTL 0xc001103a #define MSR_AMD64_IBSBRTARGET 0xc001103b +/* Fam 15h MSRs */ +#define MSR_F15H_PERF_CTL 0xc0010200 +#define MSR_F15H_PERF_CTR 0xc0010201 + /* Fam 10h MSRs */ #define MSR_FAM10H_MMIO_CONF_BASE 0xc0010058 #define FAM10H_MMIO_CONF_ENABLE (1<<0) diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index a011bcc0f943..f2984d43a6b3 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -29,11 +29,12 @@ #include "op_x86_model.h" #include "op_counter.h" -#define NUM_COUNTERS 4 +#define NUM_COUNTERS 4 +#define NUM_COUNTERS_F15H 6 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX -#define NUM_VIRT_COUNTERS 32 +#define NUM_VIRT_COUNTERS 32 #else -#define NUM_VIRT_COUNTERS NUM_COUNTERS +#define NUM_VIRT_COUNTERS 0 #endif #define OP_EVENT_MASK 0x0FFF @@ -41,7 +42,8 @@ #define MSR_AMD_EVENTSEL_RESERVED ((0xFFFFFCF0ULL<<32)|(1ULL<<21)) -static unsigned long reset_value[NUM_VIRT_COUNTERS]; +static int num_counters; +static unsigned long reset_value[OP_MAX_COUNTER]; #define IBS_FETCH_SIZE 6 #define IBS_OP_SIZE 12 @@ -387,7 +389,7 @@ static void op_mux_switch_ctrl(struct op_x86_model_spec const *model, int i; /* enable active counters */ - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { int virt = op_x86_phys_to_virt(i); if (!reset_value[virt]) continue; @@ -406,7 +408,7 @@ static void op_amd_shutdown(struct op_msrs const * const msrs) { int i; - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if (!msrs->counters[i].addr) continue; release_perfctr_nmi(MSR_K7_PERFCTR0 + i); @@ -418,7 +420,7 @@ static int op_amd_fill_in_addresses(struct op_msrs * const msrs) { int i; - for (i = 0; i < NUM_COUNTERS; i++) { + for (i = 0; i < num_counters; i++) { if (!reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i)) goto fail; if (!reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) { @@ -426,8 +428,13 @@ static int op_amd_fill_in_addresses(struct op_msrs * const msrs) goto fail; } /* both registers must be reserved */ - msrs->counters[i].addr = MSR_K7_PERFCTR0 + i; - msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i; + if (num_counters == NUM_COUNTERS_F15H) { + msrs->counters[i].addr = MSR_F15H_PERF_CTR + (i << 1); + msrs->controls[i].addr = MSR_F15H_PERF_CTL + (i << 1); + } else { + msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i; + msrs->counters[i].addr = MSR_K7_PERFCTR0 + i; + } continue; fail: if (!counter_config[i].enabled) @@ -447,7 +454,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model, int i; /* setup reset_value */ - for (i = 0; i < NUM_VIRT_COUNTERS; ++i) { + for (i = 0; i < OP_MAX_COUNTER; ++i) { if (counter_config[i].enabled && msrs->counters[op_x86_virt_to_phys(i)].addr) reset_value[i] = counter_config[i].count; @@ -456,7 +463,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model, } /* clear all counters */ - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if (!msrs->controls[i].addr) continue; rdmsrl(msrs->controls[i].addr, val); @@ -472,7 +479,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model, } /* enable active counters */ - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { int virt = op_x86_phys_to_virt(i); if (!reset_value[virt]) continue; @@ -503,7 +510,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs, u64 val; int i; - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { int virt = op_x86_phys_to_virt(i); if (!reset_value[virt]) continue; @@ -526,7 +533,7 @@ static void op_amd_start(struct op_msrs const * const msrs) u64 val; int i; - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if (!reset_value[op_x86_phys_to_virt(i)]) continue; rdmsrl(msrs->controls[i].addr, val); @@ -546,7 +553,7 @@ static void op_amd_stop(struct op_msrs const * const msrs) * Subtle: stop on all counters to avoid race with setting our * pm callback */ - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if (!reset_value[op_x86_phys_to_virt(i)]) continue; rdmsrl(msrs->controls[i].addr, val); @@ -698,18 +705,29 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root) return 0; } +struct op_x86_model_spec op_amd_spec; + static int op_amd_init(struct oprofile_operations *ops) { init_ibs(); create_arch_files = ops->create_files; ops->create_files = setup_ibs_files; + + if (boot_cpu_data.x86 == 0x15) { + num_counters = NUM_COUNTERS_F15H; + } else { + num_counters = NUM_COUNTERS; + } + + op_amd_spec.num_counters = num_counters; + op_amd_spec.num_controls = num_counters; + op_amd_spec.num_virt_counters = max(num_counters, NUM_VIRT_COUNTERS); + return 0; } struct op_x86_model_spec op_amd_spec = { - .num_counters = NUM_COUNTERS, - .num_controls = NUM_COUNTERS, - .num_virt_counters = NUM_VIRT_COUNTERS, + /* num_counters/num_controls filled in at runtime */ .reserved = MSR_AMD_EVENTSEL_RESERVED, .event_mask = OP_EVENT_MASK, .init = op_amd_init, -- 2.30.2