From db6ff390b03f8e5de06ecf9540dcbd74c0aef67f Mon Sep 17 00:00:00 2001 From: Jeff Collins Date: Thu, 25 Feb 2021 11:11:58 -0500 Subject: [PATCH] mvebu: add LED support for GL.iNet GL-MV1000 This patch enables LED support for the GL.iNet GL-MV1000 Signed-off-by: Jeff Collins [add SPDX identifier on new file, add aliases, minor cosmetic issues] Signed-off-by: Adrian Schmutzler (cherry picked from commit 6e0c780eb3b4ba1e52216c1d671897749dd81829) --- .../cortexa53/base-files/etc/board.d/01_leds | 18 ++++++++++++ .../dts/marvell/armada-3720-gl-mv1000.dts | 29 ++++++++++++++++++- 2 files changed, 46 insertions(+), 1 deletion(-) create mode 100755 target/linux/mvebu/cortexa53/base-files/etc/board.d/01_leds diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa53/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..42f4deb88a --- /dev/null +++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/01_leds @@ -0,0 +1,18 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +glinet,gl-mv1000) + ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts index 86c33fa100..0e15debdea 100644 --- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -8,6 +8,13 @@ model = "GL.iNet GL-MV1000"; compatible = "glinet,gl-mv1000", "marvell,armada3720"; + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -23,12 +30,32 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; - + gpios-states = <0>; states = <1800000 0x1 3300000 0x0>; enable-active-high; }; + + leds { + compatible = "gpio-leds"; + + vpn { + label = "green:vpn"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; }; &spi0 { -- 2.30.2