From dc66085b7a03c1c73774254ff7ac59159810b628 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 19 Aug 2014 00:51:51 +0800 Subject: [PATCH] ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5 i2c0 is connected to the gsl1680 capacitive touch panel controller. i2c1 is connected to an mma7660 3-axis accelerometer. i2c2 is connected to the front and back gc0309 camera sensors. The camera sensors require additional regulators be enabled before they are available. All these peripherals are not supported by the kernel yet. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index ef1e4f3aaf39..e9b8cca8dcc1 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -43,6 +43,25 @@ }; }; + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; + }; + r_uart: serial@01f02800 { pinctrl-names = "default"; pinctrl-0 = <&r_uart_pins_a>; -- 2.30.2