From dfb7513374c1f8e7cd595106fbdba3fd07ebaf30 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Mon, 12 Nov 2018 09:58:37 +0100 Subject: [PATCH] scsi: lpfc: fix block guard enablement on SLI3 adapters Since f44ac12f1dcc, BG enablement is tracked with the LPFC_SLI3_BG_ENABLED bit, which is set in lpfc_get_cfgparam before lpfc_sli_config_sli_port() is called. The bit shouldn't be cleared before checking the feature. Based on problem analysis by David Bond. Fixes: f44ac12f1dcc "scsi: lpfc: Memory allocation error during driver start-up on power8" Tested-by: David Bond Signed-off-by: Martin Wilck Cc: stable@vger.kernel.org # 4.17.x Cc: stable@vger.kernel.org # 4.18.x Cc: stable@vger.kernel.org # 4.19.x Reviewed-by: Hannes Reinecke Acked-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 6 +++++- drivers/scsi/lpfc/lpfc_sli.c | 1 - 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 20fa6785a0e2..68d62d55a3a5 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -167,7 +167,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba) sizeof(phba->wwpn)); } - phba->sli3_options = 0x0; + /* + * Clear all option bits except LPFC_SLI3_BG_ENABLED, + * which was already set in lpfc_get_cfgparam() + */ + phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED; /* Setup and issue mailbox READ REV command */ lpfc_read_rev(phba, pmb); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 783a1540cfbe..b9e5cd79931a 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4965,7 +4965,6 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode) phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED | LPFC_SLI3_CRP_ENABLED | - LPFC_SLI3_BG_ENABLED | LPFC_SLI3_DSS_ENABLED); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, -- 2.30.2