From e02f5f52cafbea013817d81f1acc4baf50d6324b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 14 Nov 2007 16:59:59 -0800 Subject: [PATCH] serial: only use PNP IRQ if it's valid "Luming Yu" says: There is a "ttyS1 irq is -1" problem observed on tiger4 which cause the serial port broken. It is because that there is __no__ ACPI IRQ resource assigned for the serial port. So the value of the IRQ for the port is never changed since it got initialized to -1. If PNP supplies a valid IRQ, use it. Otherwise, leave port.irq == 0, which means "no IRQ" to the serial core. Signed-off-by: Bjorn Helgaas Cc: Yu Luming Acked-by: Matthew Wilcox Cc: Alan Cox Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pnp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index ad0755919bcc..1de098e75497 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -439,7 +439,8 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) } memset(&port, 0, sizeof(struct uart_port)); - port.irq = pnp_irq(dev, 0); + if (pnp_irq_valid(dev, 0)) + port.irq = pnp_irq(dev, 0); if (pnp_port_valid(dev, 0)) { port.iobase = pnp_port_start(dev, 0); port.iotype = UPIO_PORT; -- 2.30.2