From e8e2c70ce61b42b1d9d8953c8a87feb8ba6c6e74 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 27 Jul 2011 05:53:33 -0300
Subject: [PATCH] [media] V4L: mt9v022: support the new mbus-config subdev ops

Extend the driver to also support [gs]_mbus_config() subdevice video
operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9v022.c | 76 ++++++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 51b0fccbfe70..2fc6ca22f31c 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -14,9 +14,10 @@
 #include <linux/delay.h>
 #include <linux/log2.h>
 
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/soc_camera.h>
 
 /*
  * mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
@@ -848,6 +849,77 @@ static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 	return 0;
 }
 
+static int mt9v022_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+
+	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE |
+		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int mt9v022_s_mbus_config(struct v4l2_subdev *sd,
+				 const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
+	unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+	unsigned int bps = soc_mbus_get_fmtdesc(icd->current_fmt->code)->bits_per_sample;
+	int ret;
+	u16 pixclk = 0;
+
+	dev_info(icd->pdev, "set %d: %s, %dbps\n", icd->current_fmt->code,
+		 icd->current_fmt->host_fmt->name, bps);
+
+	if (icl->set_bus_param) {
+		ret = icl->set_bus_param(icl, 1 << (bps - 1));
+		if (ret)
+			return ret;
+	} else if (bps != 10) {
+		/*
+		 * Without board specific bus width settings we only support the
+		 * sensors native bus width
+		 */
+		return -EINVAL;
+	}
+
+	if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+		pixclk |= 0x10;
+
+	if (!(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH))
+		pixclk |= 0x1;
+
+	if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH))
+		pixclk |= 0x2;
+
+	ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
+	if (ret < 0)
+		return ret;
+
+	if (!(flags & V4L2_MBUS_MASTER))
+		mt9v022->chip_control &= ~0x8;
+
+	ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
+		pixclk, mt9v022->chip_control);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
 	.s_stream	= mt9v022_s_stream,
 	.s_mbus_fmt	= mt9v022_s_fmt,
@@ -857,6 +929,8 @@ static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
 	.g_crop		= mt9v022_g_crop,
 	.cropcap	= mt9v022_cropcap,
 	.enum_mbus_fmt	= mt9v022_enum_fmt,
+	.g_mbus_config	= mt9v022_g_mbus_config,
+	.s_mbus_config	= mt9v022_s_mbus_config,
 };
 
 static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = {
-- 
2.30.2