From e8ef95227a66284e070d255f902e2e4139fd141a Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Tue, 6 Nov 2007 19:35:19 +0100 Subject: [PATCH] x86: unification of cfufreq/Kconfig Merge the two Kconfig files to a single file. Checked using make allmodconfig for x86_64. No changes in build. Signed-off-by: Sam Ravnborg Cc: Adrian Bunk Cc: Dave Jones --- arch/x86/Kconfig.i386 | 2 +- arch/x86/Kconfig.x86_64 | 2 +- .../cpu/cpufreq/{Kconfig_32 => Kconfig} | 69 +++++++---- arch/x86/kernel/cpu/cpufreq/Kconfig_64 | 108 ------------------ 4 files changed, 49 insertions(+), 132 deletions(-) rename arch/x86/kernel/cpu/cpufreq/{Kconfig_32 => Kconfig} (77%) delete mode 100644 arch/x86/kernel/cpu/cpufreq/Kconfig_64 diff --git a/arch/x86/Kconfig.i386 b/arch/x86/Kconfig.i386 index 7331efe891a7..b6f2fd0e443b 100644 --- a/arch/x86/Kconfig.i386 +++ b/arch/x86/Kconfig.i386 @@ -1092,7 +1092,7 @@ config APM_REAL_MODE_POWER_OFF endif # APM -source "arch/x86/kernel/cpu/cpufreq/Kconfig_32" +source "arch/x86/kernel/cpu/cpufreq/Kconfig" source "drivers/cpuidle/Kconfig" diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64 index cc468ea61240..8d6b53425449 100644 --- a/arch/x86/Kconfig.x86_64 +++ b/arch/x86/Kconfig.x86_64 @@ -719,7 +719,7 @@ config ARCH_HIBERNATION_HEADER source "drivers/acpi/Kconfig" -source "arch/x86/kernel/cpu/cpufreq/Kconfig_64" +source "arch/x86/kernel/cpu/cpufreq/Kconfig" source "drivers/cpuidle/Kconfig" diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 b/arch/x86/kernel/cpu/cpufreq/Kconfig similarity index 77% rename from arch/x86/kernel/cpu/cpufreq/Kconfig_32 rename to arch/x86/kernel/cpu/cpufreq/Kconfig index d8c6f132dc7a..151eda0a23fc 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -19,6 +19,9 @@ config X86_ACPI_CPUFREQ Processor Performance States. This driver also supports Intel Enhanced Speedstep. + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + For details, take a look at . If in doubt, say N. @@ -26,7 +29,7 @@ config X86_ACPI_CPUFREQ config ELAN_CPUFREQ tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE - depends on X86_ELAN + depends on X86_32 && X86_ELAN ---help--- This adds the CPUFreq driver for AMD Elan SC400 and SC410 processors. @@ -42,7 +45,7 @@ config ELAN_CPUFREQ config SC520_CPUFREQ tristate "AMD Elan SC520" select CPU_FREQ_TABLE - depends on X86_ELAN + depends on X86_32 && X86_ELAN ---help--- This adds the CPUFreq driver for AMD Elan SC520 processor. @@ -54,6 +57,7 @@ config SC520_CPUFREQ config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for mobile AMD K6-2+ and mobile AMD K6-3+ processors. @@ -65,6 +69,7 @@ config X86_POWERNOW_K6 config X86_POWERNOW_K7 tristate "AMD Mobile Athlon/Duron PowerNow!" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for mobile AMD K7 mobile processors. @@ -76,23 +81,27 @@ config X86_POWERNOW_K7_ACPI bool depends on X86_POWERNOW_K7 && ACPI_PROCESSOR depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + depends on X86_32 default y config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE - depends on EXPERIMENTAL help This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + For details, take a look at . If in doubt, say N. config X86_POWERNOW_K8_ACPI - bool "ACPI Support" - select ACPI_PROCESSOR - depends on ACPI && X86_POWERNOW_K8 + bool + prompt "ACPI Support" if X86_32 + depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) default y help This provides access to the K8s Processor Performance States via ACPI. @@ -104,7 +113,7 @@ config X86_POWERNOW_K8_ACPI config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI + depends on X86_32 && PCI help This add the CPUFreq driver for NatSemi Geode processors which support suspend modulation. @@ -114,15 +123,20 @@ config X86_GX_SUSPMOD If in doubt, say N. config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep" + tristate "Intel Enhanced SpeedStep (deprecated)" select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE + select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 + depends on X86_32 || (X86_64 && ACPI_PROCESSOR) help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, - you also need to say Y to "Use ACPI tables to decode..." below - [which might imply enabling ACPI] if you want to use this driver - on non-Banias CPUs. + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. For details, take a look at . @@ -130,7 +144,7 @@ config X86_SPEEDSTEP_CENTRINO config X86_SPEEDSTEP_CENTRINO_TABLE bool "Built-in tables for Banias CPUs" - depends on X86_SPEEDSTEP_CENTRINO + depends on X86_32 && X86_SPEEDSTEP_CENTRINO default y help Use built-in tables for Banias CPUs if ACPI encoding @@ -141,6 +155,7 @@ config X86_SPEEDSTEP_CENTRINO_TABLE config X86_SPEEDSTEP_ICH tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all @@ -154,7 +169,7 @@ config X86_SPEEDSTEP_ICH config X86_SPEEDSTEP_SMI tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" select CPU_FREQ_TABLE - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) @@ -169,15 +184,24 @@ config X86_P4_CLOCKMOD select CPU_FREQ_TABLE help This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. For details, take a look at . - If in doubt, say N. + Unless you are absolutely sure say N. config X86_CPUFREQ_NFORCE2 tristate "nVidia nForce2 FSB changing" - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for FSB changing on nVidia nForce2 platforms. @@ -188,6 +212,7 @@ config X86_CPUFREQ_NFORCE2 config X86_LONGRUN tristate "Transmeta LongRun" + depends on X86_32 help This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors which support LongRun. @@ -199,7 +224,7 @@ config X86_LONGRUN config X86_LONGHAUL tristate "VIA Cyrix III Longhaul" select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR + depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA Samuel/CyrixIII, VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T @@ -212,7 +237,7 @@ config X86_LONGHAUL config X86_E_POWERSAVER tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" select CPU_FREQ_TABLE - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for VIA C7 processors. @@ -233,11 +258,11 @@ config X86_ACPI_CPUFREQ_PROC_INTF config X86_SPEEDSTEP_LIB tristate - default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD + default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) config X86_SPEEDSTEP_RELAXED_CAP_CHECK bool "Relaxed speedstep capability checks" - depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) help Don't perform all checks for a speedstep capable system which would normally be done. Some ancient or strange systems, though speedstep diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 b/arch/x86/kernel/cpu/cpufreq/Kconfig_64 deleted file mode 100644 index 9c9699fdcf52..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 +++ /dev/null @@ -1,108 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. - - To compile this driver as a module, choose M here: the - module will be called powernow-k8. - - For details, take a look at . - - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool - depends on X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) - default y - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs - or 64bit enabled Intel Xeons. - - To compile this driver as a module, choose M here: the - module will be called speedstep-centrino. - - For details, take a look at . - - If in doubt, say N. - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - To compile this driver as a module, choose M here: the - module will be called acpi-cpufreq. - - For details, take a look at . - - If in doubt, say N. - -comment "shared options" - -config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" - depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI - help - This enables the deprecated /proc/acpi/processor/../performance - interface. While it is helpful for debugging, the generic, - cross-architecture cpufreq interfaces should be used. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - depends on EMBEDDED - select CPU_FREQ_TABLE - help - This adds the clock modulation driver for Intel Pentium 4 / XEON - processors. When enabled it will lower CPU temperature by skipping - clocks. - - This driver should be only used in exceptional - circumstances when very low power is needed because it causes severe - slowdowns and noticeable latencies. Normally Speedstep should be used - instead. - - To compile this driver as a module, choose M here: the - module will be called p4-clockmod. - - For details, take a look at . - - Unless you are absolutely sure say N. - - -config X86_SPEEDSTEP_LIB - tristate - default X86_P4_CLOCKMOD - -endif - -endmenu -- 2.30.2