From e995dccadaf99e216cf5410463941d978c455c58 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Thu, 20 Sep 2018 19:13:35 +0300 Subject: [PATCH] usb: xhci-mtk: supports SSP without external USB3 gen2 hub Supports SSP scheduling only for SSP device directly connected to root hub but not through external USB3 gen2 hub which need use a new scheduling way. Signed-off-by: Chunfeng Yun Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk-sch.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 36050a1f8037..fea555570ad4 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -13,6 +13,7 @@ #include "xhci.h" #include "xhci-mtk.h" +#define SSP_BW_BOUNDARY 130000 #define SS_BW_BOUNDARY 51000 /* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */ #define HS_BW_BOUNDARY 6144 @@ -25,7 +26,7 @@ #define TT_MICROFRAMES_MAX 9 /* mtk scheduler bitmasks */ -#define EP_BPKTS(p) ((p) & 0x3f) +#define EP_BPKTS(p) ((p) & 0x7f) #define EP_BCSCOUNT(p) (((p) & 0x7) << 8) #define EP_BBM(p) ((p) << 11) #define EP_BOFFSET(p) ((p) & 0x3fff) @@ -56,7 +57,7 @@ static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, virt_dev = xhci->devs[udev->slot_id]; - if (udev->speed == USB_SPEED_SUPER) { + if (udev->speed >= USB_SPEED_SUPER) { if (usb_endpoint_dir_out(&ep->desc)) bw_index = (virt_dev->real_port - 1) * 2; else @@ -177,7 +178,7 @@ static struct mu3h_sch_ep_info *create_sch_ep(struct usb_device *udev, if (is_fs_or_ls(udev->speed)) len_bw_budget_table = TT_MICROFRAMES_MAX; - else if ((udev->speed == USB_SPEED_SUPER) + else if ((udev->speed >= USB_SPEED_SUPER) && usb_endpoint_xfer_isoc(&ep->desc)) len_bw_budget_table = get_esit(ep_ctx); else @@ -249,7 +250,7 @@ static void setup_sch_info(struct usb_device *udev, sch_ep->pkts = max_burst + 1; sch_ep->bw_cost_per_microframe = maxpkt * sch_ep->pkts; bwb_table[0] = sch_ep->bw_cost_per_microframe; - } else if (udev->speed == USB_SPEED_SUPER) { + } else if (udev->speed >= USB_SPEED_SUPER) { /* usb3_r1 spec section4.4.7 & 4.4.8 */ sch_ep->cs_count = 0; sch_ep->burst_mode = 1; @@ -511,8 +512,12 @@ static int check_sch_bw(struct usb_device *udev, break; } - bw_boundary = (udev->speed == USB_SPEED_SUPER) - ? SS_BW_BOUNDARY : HS_BW_BOUNDARY; + if (udev->speed == USB_SPEED_SUPER_PLUS) + bw_boundary = SSP_BW_BOUNDARY; + else if (udev->speed == USB_SPEED_SUPER) + bw_boundary = SS_BW_BOUNDARY; + else + bw_boundary = HS_BW_BOUNDARY; /* check bandwidth */ if (min_bw > bw_boundary) -- 2.30.2