From e9a4593cc5e36c6d47c87b439cb41c2568e7395f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 20 Jan 2012 14:33:59 -0800 Subject: [PATCH] leds: add led driver for Bachmann's ot200 Add support for leds on Bachmann's ot200 visualisation device. The device has three leds on the back panel (led_err, led_init and led_run) and can handle up to seven leds on the front panel. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. It incorporates feedback from Lars-Peter Clausen [akpm@linux-foundation.org: add dependency on HAS_IOMEM] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Christian Gmeiner Cc: Lars-Peter Clausen Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/Kconfig | 7 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-ot200.c | 171 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 179 insertions(+) create mode 100644 drivers/leds/leds-ot200.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index c957c344233f..9ca28fced2b9 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -403,6 +403,13 @@ config LEDS_MAX8997 This option enables support for on-chip LED drivers on MAXIM MAX8997 PMIC. +config LEDS_OT200 + tristate "LED support for the Bachmann OT200" + depends on LEDS_CLASS && HAS_IOMEM + help + This option enables support for the LEDs on the Bachmann OT200. + Say Y to enable LEDs on the Bachmann OT200. + config LEDS_TRIGGERS bool "LED Trigger support" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index b8a9723477f0..1fc6875a8b20 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o +obj-$(CONFIG_LEDS_OT200) += leds-ot200.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c new file mode 100644 index 000000000000..c4646825a620 --- /dev/null +++ b/drivers/leds/leds-ot200.c @@ -0,0 +1,171 @@ +/* + * Bachmann ot200 leds driver. + * + * Author: Sebastian Andrzej Siewior + * Christian Gmeiner + * + * License: GPL as published by the FSF. + */ + +#include +#include +#include +#include +#include +#include +#include + + +struct ot200_led { + struct led_classdev cdev; + const char *name; + unsigned long port; + u8 mask; +}; + +/* + * The device has three leds on the back panel (led_err, led_init and led_run) + * and can handle up to seven leds on the front panel. + */ + +static struct ot200_led leds[] = { + { + .name = "led_run", + .port = 0x5a, + .mask = BIT(0), + }, + { + .name = "led_init", + .port = 0x5a, + .mask = BIT(1), + }, + { + .name = "led_err", + .port = 0x5a, + .mask = BIT(2), + }, + { + .name = "led_1", + .port = 0x49, + .mask = BIT(7), + }, + { + .name = "led_2", + .port = 0x49, + .mask = BIT(6), + }, + { + .name = "led_3", + .port = 0x49, + .mask = BIT(5), + }, + { + .name = "led_4", + .port = 0x49, + .mask = BIT(4), + }, + { + .name = "led_5", + .port = 0x49, + .mask = BIT(3), + }, + { + .name = "led_6", + .port = 0x49, + .mask = BIT(2), + }, + { + .name = "led_7", + .port = 0x49, + .mask = BIT(1), + } +}; + +static DEFINE_SPINLOCK(value_lock); + +/* + * we need to store the current led states, as it is not + * possible to read the current led state via inb(). + */ +static u8 leds_back; +static u8 leds_front; + +static void ot200_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct ot200_led *led = container_of(led_cdev, struct ot200_led, cdev); + u8 *val; + unsigned long flags; + + spin_lock_irqsave(&value_lock, flags); + + if (led->port == 0x49) + val = &leds_front; + else if (led->port == 0x5a) + val = &leds_back; + else + BUG(); + + if (value == LED_OFF) + *val &= ~led->mask; + else + *val |= led->mask; + + outb(*val, led->port); + spin_unlock_irqrestore(&value_lock, flags); +} + +static int __devinit ot200_led_probe(struct platform_device *pdev) +{ + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(leds); i++) { + + leds[i].cdev.name = leds[i].name; + leds[i].cdev.brightness_set = ot200_led_brightness_set; + + ret = led_classdev_register(&pdev->dev, &leds[i].cdev); + if (ret < 0) + goto err; + } + + leds_front = 0; /* turn off all front leds */ + leds_back = BIT(1); /* turn on init led */ + outb(leds_front, 0x49); + outb(leds_back, 0x5a); + + return 0; + +err: + for (i = i - 1; i >= 0; i--) + led_classdev_unregister(&leds[i].cdev); + + return ret; +} + +static int __devexit ot200_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(leds); i++) + led_classdev_unregister(&leds[i].cdev); + + return 0; +} + +static struct platform_driver ot200_led_driver = { + .probe = ot200_led_probe, + .remove = __devexit_p(ot200_led_remove), + .driver = { + .name = "leds-ot200", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ot200_led_driver); + +MODULE_AUTHOR("Sebastian A. Siewior "); +MODULE_DESCRIPTION("ot200 LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:leds-ot200"); -- 2.30.2