From eb7073db1076777496495483854993165e14790f Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 2 Jun 2011 11:31:29 +0900 Subject: [PATCH] 8250_pci: add -ENODEV code for Intel EG20T PCH Intel EG20T PCH has UART device which is compatible with 8250. Currently, with general configuration, the PCH UART driver is not loaded but 8250 standard driver is loaded. Therefore, in case of using PCH UART driver, need to disable 8250 pci function. However, this procedure is not best solution. This patch, in 8250_pci, if the device is the PCH or the family IOH, '-ENODEV' is returned. As a result, disabling 8250-pci processing becomes unnecessary. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pci.c | 59 +++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 4b4968a294b2..d7dc513451a6 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -994,6 +994,15 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -1446,6 +1455,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_oxsemi_tornado_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, /* * Cronyx Omega PCI (PLX-chip based) */ -- 2.30.2