From f15096f12a4e9340168df5fdd9201aa8ed60d59e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 5 Dec 2018 09:05:30 -0200 Subject: [PATCH] ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock According to bindings/regulator/fixed-regulator.txt the 'clocks' and 'clock-names' properties are not valid ones. In order to turn on the Wifi clock the correct location for describing the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly. Fixes: 56354959cfec ("ARM: dts: imx: add Boundary Devices Nitrogen7 board") Signed-off-by: Fabio Estevam Acked-by: Troy Kisky Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-nitrogen7.dts | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index d8aac4a2d02a..177d21fdeb28 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -86,13 +86,17 @@ compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; - clock-names = "slow"; regulator-name = "reg_wlan"; startup-delay-us = <70000>; gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + usdhc2_pwrseq: usdhc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; + clock-names = "ext_clock"; + }; }; &adc1 { @@ -375,6 +379,7 @@ bus-width = <4>; non-removable; vmmc-supply = <®_wlan>; + mmc-pwrseq = <&usdhc2_pwrseq>; cap-power-off-card; keep-power-in-suspend; status = "okay"; -- 2.30.2