From f2783c15007468c14972e2617db51e9affc7fad9 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 20 Oct 2005 09:23:26 +1000 Subject: [PATCH] powerpc: Merge time.c and asm/time.h. We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 4 +- arch/powerpc/kernel/misc_32.S | 27 ++ arch/powerpc/kernel/ppc_ksyms.c | 1 - arch/powerpc/kernel/setup_64.c | 9 - arch/{ppc64 => powerpc}/kernel/time.c | 497 +++++++++++++--------- arch/powerpc/platforms/powermac/cpufreq.c | 9 - arch/powerpc/platforms/powermac/time.c | 28 +- arch/ppc/kernel/Makefile | 2 +- arch/ppc/kernel/time.c | 9 + arch/ppc64/kernel/Makefile | 2 +- arch/ppc64/kernel/pmac_time.c | 2 - arch/ppc64/kernel/setup.c | 9 - drivers/macintosh/via-pmu.c | 11 - include/asm-powerpc/irq.h | 2 + include/asm-powerpc/rtc.h | 80 ++++ include/asm-powerpc/time.h | 212 +++++++++ include/asm-ppc64/time.h | 124 ------ 17 files changed, 650 insertions(+), 378 deletions(-) rename arch/{ppc64 => powerpc}/kernel/time.c (72%) create mode 100644 include/asm-powerpc/rtc.h create mode 100644 include/asm-powerpc/time.h delete mode 100644 include/asm-ppc64/time.h diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 5c5d2b5f3ca2..b347ac320252 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -29,7 +29,7 @@ extra-$(CONFIG_PPC64) += entry_64.o extra-$(CONFIG_PPC_FPU) += fpu.o extra-y += vmlinux.lds -obj-y += process.o init_task.o \ +obj-y += process.o init_task.o time.o \ prom.o systbl.o traps.o obj-$(CONFIG_PPC32) += entry_32.o idle_6xx.o setup_32.o misc_32.o obj-$(CONFIG_PPC64) += setup_64.o misc_64.o @@ -44,7 +44,7 @@ endif else # stuff used from here for ARCH=ppc or ARCH=ppc64 -obj-$(CONFIG_PPC64) += traps.o process.o init_task.o +obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o fpux-$(CONFIG_PPC32) += fpu.o extra-$(CONFIG_PPC_FPU) += $(fpux-y) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 0b0e908b5065..303229b090b8 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -35,6 +35,33 @@ _GLOBAL(__delay) 1: bdnz 1b blr +/* + * This returns the high 64 bits of the product of two 64-bit numbers. + */ +_GLOBAL(mulhdu) + cmpwi r6,0 + cmpwi cr1,r3,0 + mr r10,r4 + mulhwu r4,r4,r5 + beq 1f + mulhwu r0,r10,r6 + mullw r7,r10,r5 + addc r7,r0,r7 + addze r4,r4 +1: beqlr cr1 /* all done if high part of A is 0 */ + mr r10,r3 + mullw r9,r3,r5 + mulhwu r3,r3,r5 + beq 2f + mullw r0,r10,r6 + mulhwu r8,r10,r6 + addc r7,r0,r7 + adde r4,r4,r8 + addze r3,r3 +2: addc r4,r4,r9 + addze r3,r3 + blr + /* * Returns (address we're running at) - (address we were linked at) * for use before the text and data are mapped to KERNELBASE. diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 010554e5fe48..40c9e67e1b28 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -260,7 +260,6 @@ EXPORT_SYMBOL(__res); #ifdef CONFIG_PPC32 EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); -EXPORT_SYMBOL(disarm_decr); #endif #ifdef CONFIG_PPC_STD_MMU_32 diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 4fcf67575cbb..6f29614c3581 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -1083,15 +1083,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -/* This should only be called on processor 0 during calibrate decr */ -void __init setup_default_decr(void) -{ - struct paca_struct *lpaca = get_paca(); - - lpaca->default_decr = tb_ticks_per_jiffy; - lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; -} - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/ppc64/kernel/time.c b/arch/powerpc/kernel/time.c similarity index 72% rename from arch/ppc64/kernel/time.c rename to arch/powerpc/kernel/time.c index 7f63755eddfd..d1608473075f 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -1,5 +1,4 @@ /* - * * Common time routines among all ppc machines. * * Written by Cort Dougan (cort@cs.nmt.edu) to merge @@ -44,29 +43,32 @@ #include #include #include -#include #include #include #include #include #include +#include +#include #include #include #include #include #include -#ifdef CONFIG_PPC_ISERIES -#include -#include -#endif #include #include -#include #include -#include +#include +#include +#ifdef CONFIG_PPC64 #include #include +#endif +#ifdef CONFIG_PPC_ISERIES +#include +#include +#endif u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES; @@ -81,27 +83,37 @@ unsigned long iSeries_recal_tb = 0; static unsigned long first_settimeofday = 1; #endif +/* The decrementer counts down by 128 every 128ns on a 601. */ +#define DECREMENTER_COUNT_601 (1000000000 / HZ) + #define XSEC_PER_SEC (1024*1024) +#ifdef CONFIG_PPC64 +#define SCALE_XSEC(xsec, max) (((xsec) * max) / XSEC_PER_SEC) +#else +/* compute ((xsec << 12) * max) >> 32 */ +#define SCALE_XSEC(xsec, max) mulhwu((xsec) << 12, max) +#endif + unsigned long tb_ticks_per_jiffy; unsigned long tb_ticks_per_usec = 100; /* sane default */ EXPORT_SYMBOL(tb_ticks_per_usec); unsigned long tb_ticks_per_sec; -unsigned long tb_to_xs; -unsigned tb_to_us; +u64 tb_to_xs; +unsigned tb_to_us; unsigned long processor_freq; DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL_GPL(rtc_lock); -unsigned long tb_to_ns_scale; -unsigned long tb_to_ns_shift; +u64 tb_to_ns_scale; +unsigned tb_to_ns_shift; struct gettimeofday_struct do_gtod; extern unsigned long wall_jiffies; -extern int smp_tb_synchronized; extern struct timezone sys_tz; +static long timezone_offset; void ppc_adjtimex(void); @@ -110,6 +122,10 @@ static unsigned adjusting_time = 0; unsigned long ppc_proc_freq; unsigned long ppc_tb_freq; +#ifdef CONFIG_PPC32 /* XXX for now */ +#define boot_cpuid 0 +#endif + static __inline__ void timer_check_rtc(void) { /* @@ -129,30 +145,30 @@ static __inline__ void timer_check_rtc(void) * seconds like on Intel to avoid problems with non UTC clocks. */ if (ntp_synced() && - xtime.tv_sec - last_rtc_update >= 659 && - abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && - jiffies - wall_jiffies == 1) { - struct rtc_time tm; - to_tm(xtime.tv_sec+1, &tm); - tm.tm_year -= 1900; - tm.tm_mon -= 1; - if (ppc_md.set_rtc_time(&tm) == 0) - last_rtc_update = xtime.tv_sec+1; - else - /* Try again one minute later */ - last_rtc_update += 60; + xtime.tv_sec - last_rtc_update >= 659 && + abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && + jiffies - wall_jiffies == 1) { + struct rtc_time tm; + to_tm(xtime.tv_sec + 1 + timezone_offset, &tm); + tm.tm_year -= 1900; + tm.tm_mon -= 1; + if (ppc_md.set_rtc_time(&tm) == 0) + last_rtc_update = xtime.tv_sec + 1; + else + /* Try again one minute later */ + last_rtc_update += 60; } } /* * This version of gettimeofday has microsecond resolution. */ -static inline void __do_gettimeofday(struct timeval *tv, unsigned long tb_val) +static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) { - unsigned long sec, usec, tb_ticks; - unsigned long xsec, tb_xsec; - struct gettimeofday_vars * temp_varp; - unsigned long temp_tb_to_xs, temp_stamp_xsec; + unsigned long sec, usec; + u64 tb_ticks, xsec; + struct gettimeofday_vars *temp_varp; + u64 temp_tb_to_xs, temp_stamp_xsec; /* * These calculations are faster (gets rid of divides) @@ -164,11 +180,10 @@ static inline void __do_gettimeofday(struct timeval *tv, unsigned long tb_val) tb_ticks = tb_val - temp_varp->tb_orig_stamp; temp_tb_to_xs = temp_varp->tb_to_xs; temp_stamp_xsec = temp_varp->stamp_xsec; - tb_xsec = mulhdu( tb_ticks, temp_tb_to_xs ); - xsec = temp_stamp_xsec + tb_xsec; + xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); sec = xsec / XSEC_PER_SEC; - xsec -= sec * XSEC_PER_SEC; - usec = (xsec * USEC_PER_SEC)/XSEC_PER_SEC; + usec = (unsigned long)xsec & (XSEC_PER_SEC - 1); + usec = SCALE_XSEC(usec, 1000000); tv->tv_sec = sec; tv->tv_usec = usec; @@ -185,6 +200,8 @@ EXPORT_SYMBOL(do_gettimeofday); static inline void timer_sync_xtime(unsigned long cur_tb) { +#ifdef CONFIG_PPC64 + /* why do we do this? */ struct timeval my_tv; __do_gettimeofday(&my_tv, cur_tb); @@ -193,47 +210,74 @@ static inline void timer_sync_xtime(unsigned long cur_tb) xtime.tv_sec = my_tv.tv_sec; xtime.tv_nsec = my_tv.tv_usec * 1000; } +#endif } /* - * When the timebase - tb_orig_stamp gets too big, we do a manipulation - * between tb_orig_stamp and stamp_xsec. The goal here is to keep the - * difference tb - tb_orig_stamp small enough to always fit inside a - * 32 bits number. This is a requirement of our fast 32 bits userland - * implementation in the vdso. If we "miss" a call to this function - * (interrupt latency, CPU locked in a spinlock, ...) and we end up - * with a too big difference, then the vdso will fallback to calling - * the syscall + * There are two copies of tb_to_xs and stamp_xsec so that no + * lock is needed to access and use these values in + * do_gettimeofday. We alternate the copies and as long as a + * reasonable time elapses between changes, there will never + * be inconsistent values. ntpd has a minimum of one minute + * between updates. */ -static __inline__ void timer_recalc_offset(unsigned long cur_tb) +static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, + unsigned int new_tb_to_xs) { - struct gettimeofday_vars * temp_varp; unsigned temp_idx; - unsigned long offset, new_stamp_xsec, new_tb_orig_stamp; - - if (((cur_tb - do_gtod.varp->tb_orig_stamp) & 0x80000000u) == 0) - return; + struct gettimeofday_vars *temp_varp; temp_idx = (do_gtod.var_idx == 0); temp_varp = &do_gtod.vars[temp_idx]; - new_tb_orig_stamp = cur_tb; - offset = new_tb_orig_stamp - do_gtod.varp->tb_orig_stamp; - new_stamp_xsec = do_gtod.varp->stamp_xsec + mulhdu(offset, do_gtod.varp->tb_to_xs); - - temp_varp->tb_to_xs = do_gtod.varp->tb_to_xs; - temp_varp->tb_orig_stamp = new_tb_orig_stamp; + temp_varp->tb_to_xs = new_tb_to_xs; + temp_varp->tb_orig_stamp = new_tb_stamp; temp_varp->stamp_xsec = new_stamp_xsec; smp_mb(); do_gtod.varp = temp_varp; do_gtod.var_idx = temp_idx; +#ifdef CONFIG_PPC64 + /* + * tb_update_count is used to allow the userspace gettimeofday code + * to assure itself that it sees a consistent view of the tb_to_xs and + * stamp_xsec variables. It reads the tb_update_count, then reads + * tb_to_xs and stamp_xsec and then reads tb_update_count again. If + * the two values of tb_update_count match and are even then the + * tb_to_xs and stamp_xsec values are consistent. If not, then it + * loops back and reads them again until this criteria is met. + */ ++(systemcfg->tb_update_count); smp_wmb(); - systemcfg->tb_orig_stamp = new_tb_orig_stamp; + systemcfg->tb_orig_stamp = new_tb_stamp; systemcfg->stamp_xsec = new_stamp_xsec; + systemcfg->tb_to_xs = new_tb_to_xs; smp_wmb(); ++(systemcfg->tb_update_count); +#endif +} + +/* + * When the timebase - tb_orig_stamp gets too big, we do a manipulation + * between tb_orig_stamp and stamp_xsec. The goal here is to keep the + * difference tb - tb_orig_stamp small enough to always fit inside a + * 32 bits number. This is a requirement of our fast 32 bits userland + * implementation in the vdso. If we "miss" a call to this function + * (interrupt latency, CPU locked in a spinlock, ...) and we end up + * with a too big difference, then the vdso will fallback to calling + * the syscall + */ +static __inline__ void timer_recalc_offset(u64 cur_tb) +{ + unsigned long offset; + u64 new_stamp_xsec; + + offset = cur_tb - do_gtod.varp->tb_orig_stamp; + if ((offset & 0x80000000u) == 0) + return; + new_stamp_xsec = do_gtod.varp->stamp_xsec + + mulhdu(offset, do_gtod.varp->tb_to_xs); + update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs); } #ifdef CONFIG_SMP @@ -313,7 +357,14 @@ static void iSeries_tb_recal(void) * call will not be needed) */ -unsigned long tb_last_stamp __cacheline_aligned_in_smp; +u64 tb_last_stamp __cacheline_aligned_in_smp; + +/* + * Note that on ppc32 this only stores the bottom 32 bits of + * the timebase value, but that's enough to tell when a jiffy + * has passed. + */ +DEFINE_PER_CPU(unsigned long, last_jiffy); /* * timer_interrupt - gets called when the decrementer overflows, @@ -322,17 +373,30 @@ unsigned long tb_last_stamp __cacheline_aligned_in_smp; void timer_interrupt(struct pt_regs * regs) { int next_dec; - unsigned long cur_tb; - struct paca_struct *lpaca = get_paca(); - unsigned long cpu = smp_processor_id(); + int cpu = smp_processor_id(); + unsigned long ticks; + +#ifdef CONFIG_PPC32 + if (atomic_read(&ppc_n_lost_interrupts) != 0) + do_IRQ(regs); +#endif irq_enter(); profile_tick(CPU_PROFILING, regs); - lpaca->lppaca.int_dword.fields.decr_int = 0; +#ifdef CONFIG_PPC_ISERIES + get_paca()->lppaca.int_dword.fields.decr_int = 0; +#endif + + while ((ticks = tb_ticks_since(per_cpu(last_jiffy, cpu))) + >= tb_ticks_per_jiffy) { + /* Update last_jiffy */ + per_cpu(last_jiffy, cpu) += tb_ticks_per_jiffy; + /* Handle RTCL overflow on 601 */ + if (__USE_RTC() && per_cpu(last_jiffy, cpu) >= 1000000000) + per_cpu(last_jiffy, cpu) -= 1000000000; - while (lpaca->next_jiffy_update_tb <= (cur_tb = get_tb())) { /* * We cannot disable the decrementer, so in the period * between this cpu's being marked offline in cpu_online_map @@ -342,27 +406,26 @@ void timer_interrupt(struct pt_regs * regs) */ if (!cpu_is_offline(cpu)) update_process_times(user_mode(regs)); + /* * No need to check whether cpu is offline here; boot_cpuid * should have been fixed up by now. */ - if (cpu == boot_cpuid) { - write_seqlock(&xtime_lock); - tb_last_stamp = lpaca->next_jiffy_update_tb; - timer_recalc_offset(lpaca->next_jiffy_update_tb); - do_timer(regs); - timer_sync_xtime(lpaca->next_jiffy_update_tb); - timer_check_rtc(); - write_sequnlock(&xtime_lock); - if ( adjusting_time && (time_adjust == 0) ) - ppc_adjtimex(); - } - lpaca->next_jiffy_update_tb += tb_ticks_per_jiffy; + if (cpu != boot_cpuid) + continue; + + write_seqlock(&xtime_lock); + tb_last_stamp += tb_ticks_per_jiffy; + timer_recalc_offset(tb_last_stamp); + do_timer(regs); + timer_sync_xtime(tb_last_stamp); + timer_check_rtc(); + write_sequnlock(&xtime_lock); + if (adjusting_time && (time_adjust == 0)) + ppc_adjtimex(); } - next_dec = lpaca->next_jiffy_update_tb - cur_tb; - if (next_dec > lpaca->default_decr) - next_dec = lpaca->default_decr; + next_dec = tb_ticks_per_jiffy - ticks; set_dec(next_dec); #ifdef CONFIG_PPC_ISERIES @@ -370,15 +433,47 @@ void timer_interrupt(struct pt_regs * regs) process_hvlpevents(regs); #endif +#ifdef CONFIG_PPC64 /* collect purr register values often, for accurate calculations */ if (firmware_has_feature(FW_FEATURE_SPLPAR)) { struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array); cu->current_tb = mfspr(SPRN_PURR); } +#endif irq_exit(); } +void wakeup_decrementer(void) +{ + int i; + + set_dec(tb_ticks_per_jiffy); + /* + * We don't expect this to be called on a machine with a 601, + * so using get_tbl is fine. + */ + tb_last_stamp = get_tb(); + for_each_cpu(i) + per_cpu(last_jiffy, i) = tb_last_stamp; +} + +#ifdef CONFIG_SMPxxx +void __init smp_space_timers(unsigned int max_cpus) +{ + int i; + unsigned long offset = tb_ticks_per_jiffy / max_cpus; + unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); + + for_each_cpu(i) { + if (i != boot_cpuid) { + previous_tb += offset; + per_cpu(last_jiffy, i) = previous_tb; + } + } +} +#endif + /* * Scheduler clock - returns current time in nanosec units. * @@ -396,23 +491,24 @@ int do_settimeofday(struct timespec *tv) time_t wtm_sec, new_sec = tv->tv_sec; long wtm_nsec, new_nsec = tv->tv_nsec; unsigned long flags; - unsigned long delta_xsec; long int tb_delta; - unsigned long new_xsec; + u64 new_xsec; if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) return -EINVAL; write_seqlock_irqsave(&xtime_lock, flags); - /* Updating the RTC is not the job of this code. If the time is - * stepped under NTP, the RTC will be update after STA_UNSYNC - * is cleared. Tool like clock/hwclock either copy the RTC + + /* + * Updating the RTC is not the job of this code. If the time is + * stepped under NTP, the RTC will be updated after STA_UNSYNC + * is cleared. Tools like clock/hwclock either copy the RTC * to the system time, in which case there is no point in writing * to the RTC again, or write to the RTC but then they don't call * settimeofday to perform this operation. */ #ifdef CONFIG_PPC_ISERIES - if ( first_settimeofday ) { + if (first_settimeofday) { iSeries_tb_recal(); first_settimeofday = 0; } @@ -420,7 +516,7 @@ int do_settimeofday(struct timespec *tv) tb_delta = tb_ticks_since(tb_last_stamp); tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy; - new_nsec -= tb_delta / tb_ticks_per_usec / 1000; + new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec); @@ -435,28 +531,15 @@ int do_settimeofday(struct timespec *tv) ntp_clear(); - delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp), - do_gtod.varp->tb_to_xs ); - - new_xsec = (new_nsec * XSEC_PER_SEC) / NSEC_PER_SEC; - new_xsec += new_sec * XSEC_PER_SEC; - if ( new_xsec > delta_xsec ) { - do_gtod.varp->stamp_xsec = new_xsec - delta_xsec; - systemcfg->stamp_xsec = new_xsec - delta_xsec; - } - else { - /* This is only for the case where the user is setting the time - * way back to a time such that the boot time would have been - * before 1970 ... eg. we booted ten days ago, and we are setting - * the time to Jan 5, 1970 */ - do_gtod.varp->stamp_xsec = new_xsec; - do_gtod.varp->tb_orig_stamp = tb_last_stamp; - systemcfg->stamp_xsec = new_xsec; - systemcfg->tb_orig_stamp = tb_last_stamp; - } + new_xsec = (u64)new_nsec * XSEC_PER_SEC; + do_div(new_xsec, NSEC_PER_SEC); + new_xsec += (u64)new_sec * XSEC_PER_SEC; + update_gtod(tb_last_stamp, new_xsec, do_gtod.varp->tb_to_xs); +#ifdef CONFIG_PPC64 systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; systemcfg->tz_dsttime = sys_tz.tz_dsttime; +#endif write_sequnlock_irqrestore(&xtime_lock, flags); clock_was_set(); @@ -520,21 +603,40 @@ void __init generic_calibrate_decr(void) tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); tb_to_xs = divres.result_low; - - setup_default_decr(); } #endif +unsigned long get_boot_time(void) +{ + struct rtc_time tm; + + if (ppc_md.get_boot_time) + return ppc_md.get_boot_time(); + if (!ppc_md.get_rtc_time) + return 0; + ppc_md.get_rtc_time(&tm); + return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); +} + +/* This function is only called on the boot processor */ void __init time_init(void) { - /* This function is only called on the boot processor */ unsigned long flags; - struct rtc_time tm; + unsigned long tm = 0; struct div_result res; - unsigned long scale, shift; + u64 scale; + unsigned shift; + + if (ppc_md.time_init != NULL) + timezone_offset = ppc_md.time_init(); ppc_md.calibrate_decr(); +#ifdef CONFIG_PPC64 + get_paca()->default_decr = tb_ticks_per_jiffy; +#endif + /* * Compute scale factor for sched_clock. * The calibrate_decr() function has set tb_ticks_per_sec, @@ -557,29 +659,37 @@ void __init time_init(void) #ifdef CONFIG_PPC_ISERIES if (!piranha_simulator) #endif - ppc_md.get_boot_time(&tm); + tm = get_boot_time(); write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); + xtime.tv_sec = tm; + xtime.tv_nsec = 0; tb_last_stamp = get_tb(); do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_stamp; - get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy; - do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; + __get_cpu_var(last_jiffy) = tb_last_stamp; + do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; do_gtod.tb_to_us = tb_to_us; +#ifdef CONFIG_PPC64 systemcfg->tb_orig_stamp = tb_last_stamp; systemcfg->tb_update_count = 0; systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; systemcfg->tb_to_xs = tb_to_xs; +#endif time_freq = 0; - xtime.tv_nsec = 0; + /* If platform provided a timezone (pmac), we correct the time */ + if (timezone_offset) { + sys_tz.tz_minuteswest = -timezone_offset / 60; + sys_tz.tz_dsttime = 0; + xtime.tv_sec -= timezone_offset; + } + last_rtc_update = xtime.tv_sec; set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); @@ -602,25 +712,28 @@ void __init time_init(void) void ppc_adjtimex(void) { - unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, new_tb_to_xs, new_xsec, new_stamp_xsec; +#ifdef CONFIG_PPC64 + unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, + new_tb_to_xs, new_xsec, new_stamp_xsec; unsigned long tb_ticks_per_sec_delta; long delta_freq, ltemp; struct div_result divres; unsigned long flags; - struct gettimeofday_vars * temp_varp; - unsigned temp_idx; long singleshot_ppm = 0; - /* Compute parts per million frequency adjustment to accomplish the time adjustment - implied by time_offset to be applied over the elapsed time indicated by time_constant. - Use SHIFT_USEC to get it into the same units as time_freq. */ + /* + * Compute parts per million frequency adjustment to + * accomplish the time adjustment implied by time_offset to be + * applied over the elapsed time indicated by time_constant. + * Use SHIFT_USEC to get it into the same units as + * time_freq. + */ if ( time_offset < 0 ) { ltemp = -time_offset; ltemp <<= SHIFT_USEC - SHIFT_UPDATE; ltemp >>= SHIFT_KG + time_constant; ltemp = -ltemp; - } - else { + } else { ltemp = time_offset; ltemp <<= SHIFT_USEC - SHIFT_UPDATE; ltemp >>= SHIFT_KG + time_constant; @@ -637,7 +750,10 @@ void ppc_adjtimex(void) adjusting_time = 1; - /* Compute parts per million frequency adjustment to match time_adjust */ + /* + * Compute parts per million frequency adjustment + * to match time_adjust + */ singleshot_ppm = tickadj * HZ; /* * The adjustment should be tickadj*HZ to match the code in @@ -645,7 +761,7 @@ void ppc_adjtimex(void) * large. 3/4 of tickadj*HZ seems about right */ singleshot_ppm -= singleshot_ppm / 4; - /* Use SHIFT_USEC to get it into the same units as time_freq */ + /* Use SHIFT_USEC to get it into the same units as time_freq */ singleshot_ppm <<= SHIFT_USEC; if ( time_adjust < 0 ) singleshot_ppm = -singleshot_ppm; @@ -661,7 +777,10 @@ void ppc_adjtimex(void) /* Add up all of the frequency adjustments */ delta_freq = time_freq + ltemp + singleshot_ppm; - /* Compute a new value for tb_ticks_per_sec based on the frequency adjustment */ + /* + * Compute a new value for tb_ticks_per_sec based on + * the frequency adjustment + */ den = 1000000 * (1 << (SHIFT_USEC - 8)); if ( delta_freq < 0 ) { tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den; @@ -676,61 +795,37 @@ void ppc_adjtimex(void) printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm); printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec); #endif - - /* Compute a new value of tb_to_xs (used to convert tb to microseconds and a new value of - stamp_xsec which is the time (in 1/2^20 second units) corresponding to tb_orig_stamp. This - new value of stamp_xsec compensates for the change in frequency (implied by the new tb_to_xs) - which guarantees that the current time remains the same */ + + /* + * Compute a new value of tb_to_xs (used to convert tb to + * microseconds) and a new value of stamp_xsec which is the + * time (in 1/2^20 second units) corresponding to + * tb_orig_stamp. This new value of stamp_xsec compensates + * for the change in frequency (implied by the new tb_to_xs) + * which guarantees that the current time remains the same. + */ write_seqlock_irqsave( &xtime_lock, flags ); tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp; - div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres ); + div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres); new_tb_to_xs = divres.result_low; - new_xsec = mulhdu( tb_ticks, new_tb_to_xs ); + new_xsec = mulhdu(tb_ticks, new_tb_to_xs); - old_xsec = mulhdu( tb_ticks, do_gtod.varp->tb_to_xs ); + old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs); new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec; - /* There are two copies of tb_to_xs and stamp_xsec so that no lock is needed to access and use these - values in do_gettimeofday. We alternate the copies and as long as a reasonable time elapses between - changes, there will never be inconsistent values. ntpd has a minimum of one minute between updates */ - - temp_idx = (do_gtod.var_idx == 0); - temp_varp = &do_gtod.vars[temp_idx]; - - temp_varp->tb_to_xs = new_tb_to_xs; - temp_varp->stamp_xsec = new_stamp_xsec; - temp_varp->tb_orig_stamp = do_gtod.varp->tb_orig_stamp; - smp_mb(); - do_gtod.varp = temp_varp; - do_gtod.var_idx = temp_idx; - - /* - * tb_update_count is used to allow the problem state gettimeofday code - * to assure itself that it sees a consistent view of the tb_to_xs and - * stamp_xsec variables. It reads the tb_update_count, then reads - * tb_to_xs and stamp_xsec and then reads tb_update_count again. If - * the two values of tb_update_count match and are even then the - * tb_to_xs and stamp_xsec values are consistent. If not, then it - * loops back and reads them again until this criteria is met. - */ - ++(systemcfg->tb_update_count); - smp_wmb(); - systemcfg->tb_to_xs = new_tb_to_xs; - systemcfg->stamp_xsec = new_stamp_xsec; - smp_wmb(); - ++(systemcfg->tb_update_count); + update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs); write_sequnlock_irqrestore( &xtime_lock, flags ); - +#endif /* CONFIG_PPC64 */ } -#define TICK_SIZE tick #define FEBRUARY 2 #define STARTOFTIME 1970 #define SECDAY 86400L #define SECYR (SECDAY * 365) -#define leapyear(year) ((year) % 4 == 0) +#define leapyear(year) ((year) % 4 == 0 && \ + ((year) % 100 != 0 || (year) % 400 == 0)) #define days_in_year(a) (leapyear(a) ? 366 : 365) #define days_in_month(a) (month_days[(a) - 1]) @@ -748,37 +843,25 @@ void GregorianDay(struct rtc_time * tm) int day; int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; - lastYear=tm->tm_year-1; + lastYear = tm->tm_year - 1; /* * Number of leap corrections to apply up to end of last year */ - leapsToDate = lastYear/4 - lastYear/100 + lastYear/400; + leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400; /* * This year is a leap year if it is divisible by 4 except when it is * divisible by 100 unless it is divisible by 400 * - * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 will be + * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was */ - if((tm->tm_year%4==0) && - ((tm->tm_year%100!=0) || (tm->tm_year%400==0)) && - (tm->tm_mon>2)) - { - /* - * We are past Feb. 29 in a leap year - */ - day=1; - } - else - { - day=0; - } + day = tm->tm_mon > 2 && leapyear(tm->tm_year); day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + tm->tm_mday; - tm->tm_wday=day%7; + tm->tm_wday = day % 7; } void to_tm(int tim, struct rtc_time * tm) @@ -824,14 +907,16 @@ void to_tm(int tim, struct rtc_time * tm) * oscillators and the precision with which the timebase frequency * is measured but does not harm. */ -unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) { +unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) +{ unsigned mlt=0, tmp, err; /* No concern for performance, it's done once: use a stupid * but safe and compact method to find the multiplier. */ for (tmp = 1U<<31; tmp != 0; tmp >>= 1) { - if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp; + if (mulhwu(inscale, mlt|tmp) < outscale) + mlt |= tmp; } /* We might still be off by 1 for the best approximation. @@ -841,39 +926,53 @@ unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) { * some might have been forgotten in the test however. */ - err = inscale*(mlt+1); - if (err <= inscale/2) mlt++; + err = inscale * (mlt+1); + if (err <= inscale/2) + mlt++; return mlt; - } +} /* * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit * result. */ - -void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, - unsigned divisor, struct div_result *dr ) +void div128_by_32(u64 dividend_high, u64 dividend_low, + unsigned divisor, struct div_result *dr) { - unsigned long a,b,c,d, w,x,y,z, ra,rb,rc; + unsigned long a, b, c, d; + unsigned long w, x, y, z; + u64 ra, rb, rc; a = dividend_high >> 32; b = dividend_high & 0xffffffff; c = dividend_low >> 32; d = dividend_low & 0xffffffff; - w = a/divisor; - ra = (a - (w * divisor)) << 32; + w = a / divisor; + ra = ((u64)(a - (w * divisor)) << 32) + b; + +#ifdef CONFIG_PPC64 + x = ra / divisor; + rb = ((ra - (x * divisor)) << 32) + c; - x = (ra + b)/divisor; - rb = ((ra + b) - (x * divisor)) << 32; + y = rb / divisor; + rc = ((rb - (y * divisor)) << 32) + d; - y = (rb + c)/divisor; - rc = ((rb + b) - (y * divisor)) << 32; + z = rc / divisor; +#else + /* for 32-bit, use do_div from div64.h */ + rb = ((u64) do_div(ra, divisor) << 32) + c; + x = ra; - z = (rc + d)/divisor; + rc = ((u64) do_div(rb, divisor) << 32) + d; + y = rb; + + do_div(rc, divisor); + z = rc; +#endif - dr->result_high = (w << 32) + x; - dr->result_low = (y << 32) + z; + dr->result_high = ((u64)w << 32) + x; + dr->result_low = ((u64)y << 32) + z; } diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq.c index bcd9224f3f90..c47f8b69725c 100644 --- a/arch/powerpc/platforms/powermac/cpufreq.c +++ b/arch/powerpc/platforms/powermac/cpufreq.c @@ -110,15 +110,6 @@ static inline void local_delay(unsigned long ms) msleep(ms); } -static inline void wakeup_decrementer(void) -{ - set_dec(tb_ticks_per_jiffy); - /* No currently-supported powerbook has a 601, - * so use get_tbl, not native - */ - last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); -} - #ifdef DEBUG_FREQ static inline void debug_calc_bogomips(void) { diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 3ee6d8aa14c4..eb9969b52f96 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -6,6 +6,8 @@ * * Paul Mackerras August 1996. * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 2003-2005 Benjamin Herrenschmidt. + * */ #include #include @@ -19,7 +21,9 @@ #include #include #include +#include #include +#include #include #include @@ -30,6 +34,14 @@ #include #include +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + /* Apparently the RTC stores seconds since 1 Jan 1904 */ #define RTC_OFFSET 2082844800 @@ -54,10 +66,7 @@ /* Bits in IFR and IER */ #define T1_INT 0x40 /* Timer 1 interrupt */ -extern struct timezone sys_tz; - -long __init -pmac_time_init(void) +long __init pmac_time_init(void) { #ifdef CONFIG_NVRAM s32 delta = 0; @@ -210,7 +219,7 @@ via_calibrate_decr(void) tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); - printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", + printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %lu (%u ticks)\n", tb_ticks_per_jiffy, dstart - dend); iounmap(via); @@ -228,6 +237,7 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when) static unsigned long time_diff; unsigned long flags; unsigned long seq; + struct timespec tv; switch (when) { case PBOOK_SLEEP_NOW: @@ -237,11 +247,9 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when) } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); break; case PBOOK_WAKE: - write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = pmac_get_rtc_time() + time_diff; - xtime.tv_nsec = 0; - last_rtc_update = xtime.tv_sec; - write_sequnlock_irqrestore(&xtime_lock, flags); + tv.tv_sec = pmac_get_boot_time() + time_diff; + tv.tv_nsec = 0; + do_settimeofday(&tv); break; } return PBOOK_SLEEP_OK; diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 5a742c7b0509..ccbc442c9ed3 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -37,7 +37,7 @@ endif # These are here while we do the architecture merge else -obj-y := irq.o idle.o time.o \ +obj-y := irq.o idle.o \ align.o perfmon.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index 22d7fd1e0aea..76f44ce4772e 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -121,6 +121,15 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif +void wakeup_decrementer(void) +{ + set_dec(tb_ticks_per_jiffy); + /* No currently-supported powerbook has a 601, + * so use get_tbl, not native + */ + last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); +} + /* * timer_interrupt - gets called when the decrementer overflows, * with interrupts disabled. diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 8c9012f0ce6a..18f477fa1df2 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -12,7 +12,7 @@ obj-y := setup.o entry.o misc.o prom.o endif obj-y += irq.o idle.o dma.o \ - time.o signal.o \ + signal.o \ align.o bitops.o pacaData.o \ udbg.o ioctl32.o \ rtc.o \ diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c index c89bfefbbecd..56f335115916 100644 --- a/arch/ppc64/kernel/pmac_time.c +++ b/arch/ppc64/kernel/pmac_time.c @@ -180,7 +180,5 @@ void __init pmac_calibrate_decr(void) if (fp == 0) panic("can't get cpu processor frequency"); ppc_proc_freq = *fp; - - setup_default_decr(); } diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 776b55b45e1b..3e6c1547b718 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -1083,15 +1083,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -/* This should only be called on processor 0 during calibrate decr */ -void __init setup_default_decr(void) -{ - struct paca_struct *lpaca = get_paca(); - - lpaca->default_decr = tb_ticks_per_jiffy; - lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; -} - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 503461884528..91920a1140fa 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -588,17 +588,6 @@ pmu_get_model(void) return pmu_kind; } -#ifndef CONFIG_PPC64 -static inline void wakeup_decrementer(void) -{ - set_dec(tb_ticks_per_jiffy); - /* No currently-supported powerbook has a 601, - * so use get_tbl, not native - */ - last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); -} -#endif - static void pmu_set_server_mode(int server_mode) { struct adb_request req; diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 980393a16be2..07c2b3fc4c66 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -496,5 +496,7 @@ extern int call_handle_IRQ_event(int irq, struct pt_regs *regs, #endif /* CONFIG_IRQSTACKS */ +extern void do_IRQ(struct pt_regs *regs); + #endif /* _ASM_IRQ_H */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/rtc.h b/include/asm-powerpc/rtc.h new file mode 100644 index 000000000000..d38f2a077db2 --- /dev/null +++ b/include/asm-powerpc/rtc.h @@ -0,0 +1,80 @@ +/* + * Real-time clock definitions and interfaces + * + * Author: Tom Rini + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Based on: + * include/asm-m68k/rtc.h + * + * Copyright Richard Zidlicky + * implementation details for genrtc/q40rtc driver + * + * And the old drivers/macintosh/rtc.c which was heavily based on: + * Linux/SPARC Real Time Clock Driver + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + * + * With additional work by Paul Mackerras and Franz Sirl. + */ + +#ifndef __ASM_POWERPC_RTC_H__ +#define __ASM_POWERPC_RTC_H__ + +#ifdef __KERNEL__ + +#include + +#include +#include + +#define RTC_PIE 0x40 /* periodic interrupt enable */ +#define RTC_AIE 0x20 /* alarm interrupt enable */ +#define RTC_UIE 0x10 /* update-finished interrupt enable */ + +/* some dummy definitions */ +#define RTC_BATT_BAD 0x100 /* battery bad */ +#define RTC_SQWE 0x08 /* enable square-wave output */ +#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ +#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ +#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ + +static inline unsigned int get_rtc_time(struct rtc_time *time) +{ + if (ppc_md.get_rtc_time) + ppc_md.get_rtc_time(time); + return RTC_24H; +} + +/* Set the current date and time in the real time clock. */ +static inline int set_rtc_time(struct rtc_time *time) +{ + if (ppc_md.get_rtc_time) { + ppc_md.set_rtc_time(time); + return 0; + } + return -EINVAL; +} + +static inline unsigned int get_rtc_ss(void) +{ + struct rtc_time h; + + get_rtc_time(&h); + return h.tm_sec; +} + +static inline int get_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} +static inline int set_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_RTC_H__ */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h new file mode 100644 index 000000000000..4eecc38f7092 --- /dev/null +++ b/include/asm-powerpc/time.h @@ -0,0 +1,212 @@ +/* + * Common time prototypes and such for all ppc machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) to merge + * Paul Mackerras' version and mine for PReP and Pmac. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __POWERPC_TIME_H +#define __POWERPC_TIME_H + +#ifdef __KERNEL__ +#include +#include +#include + +#include +#ifdef CONFIG_PPC64 +#include +#include +#endif + +/* time.c */ +extern unsigned long tb_ticks_per_jiffy; +extern unsigned long tb_ticks_per_usec; +extern unsigned long tb_ticks_per_sec; +extern u64 tb_to_xs; +extern unsigned tb_to_us; +extern u64 tb_last_stamp; + +DECLARE_PER_CPU(unsigned long, last_jiffy); + +struct rtc_time; +extern void to_tm(int tim, struct rtc_time * tm); +extern time_t last_rtc_update; + +extern void generic_calibrate_decr(void); +extern void wakeup_decrementer(void); + +/* Some sane defaults: 125 MHz timebase, 1GHz processor */ +extern unsigned long ppc_proc_freq; +#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) +extern unsigned long ppc_tb_freq; +#define DEFAULT_TB_FREQ 125000000UL + +/* + * By putting all of this stuff into a single struct we + * reduce the number of cache lines touched by do_gettimeofday. + * Both by collecting all of the data in one cache line and + * by touching only one TOC entry on ppc64. + */ +struct gettimeofday_vars { + u64 tb_to_xs; + u64 stamp_xsec; + u64 tb_orig_stamp; +}; + +struct gettimeofday_struct { + unsigned long tb_ticks_per_sec; + struct gettimeofday_vars vars[2]; + struct gettimeofday_vars * volatile varp; + unsigned var_idx; + unsigned tb_to_us; +}; + +struct div_result { + u64 result_high; + u64 result_low; +}; + +/* Accessor functions for the timebase (RTC on 601) registers. */ +/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */ +#ifdef CONFIG_6xx +#define __USE_RTC() cpu_has_feature(CPU_FTR_USE_TB) +#else +#define __USE_RTC() 0 +#endif + +/* On ppc64 this gets us the whole timebase; on ppc32 just the lower half */ +static inline unsigned long get_tbl(void) +{ + unsigned long tbl; + +#if defined(CONFIG_403GCX) + asm volatile("mfspr %0, 0x3dd" : "=r" (tbl)); +#else + asm volatile("mftb %0" : "=r" (tbl)); +#endif + return tbl; +} + +static inline unsigned int get_tbu(void) +{ + unsigned int tbu; + +#if defined(CONFIG_403GCX) + asm volatile("mfspr %0, 0x3dc" : "=r" (tbu)); +#else + asm volatile("mftbu %0" : "=r" (tbu)); +#endif + return tbu; +} + +static inline unsigned int get_rtcl(void) +{ + unsigned int rtcl; + + asm volatile("mfrtcl %0" : "=r" (rtcl)); + return rtcl; +} + +#ifdef CONFIG_PPC64 +static inline u64 get_tb(void) +{ + return mftb(); +} +#else +static inline u64 get_tb(void) +{ + unsigned int tbhi, tblo, tbhi2; + + do { + tbhi = get_tbu(); + tblo = get_tbl(); + tbhi2 = get_tbu(); + } while (tbhi != tbhi2); + + return ((u64)tbhi << 32) | tblo; +} +#endif + +static inline void set_tb(unsigned int upper, unsigned int lower) +{ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, upper); + mtspr(SPRN_TBWL, lower); +} + +/* Accessor functions for the decrementer register. + * The 4xx doesn't even have a decrementer. I tried to use the + * generic timer interrupt code, which seems OK, with the 4xx PIT + * in auto-reload mode. The problem is PIT stops counting when it + * hits zero. If it would wrap, we could use it just like a decrementer. + */ +static inline unsigned int get_dec(void) +{ +#if defined(CONFIG_40x) + return (mfspr(SPRN_PIT)); +#else + return (mfspr(SPRN_DEC)); +#endif +} + +static inline void set_dec(int val) +{ +#if defined(CONFIG_40x) + return; /* Have to let it auto-reload */ +#elif defined(CONFIG_8xx_CPU6) + set_dec_cpu6(val); +#else +#ifdef CONFIG_PPC_ISERIES + struct paca_struct *lpaca = get_paca(); + int cur_dec; + + if (lpaca->lppaca.shared_proc) { + lpaca->lppaca.virtual_decr = val; + cur_dec = get_dec(); + if (cur_dec > val) + HvCall_setVirtualDecr(); + } else +#endif + mtspr(SPRN_DEC, val); +#endif /* not 40x or 8xx_CPU6 */ +} + +static inline unsigned long tb_ticks_since(unsigned long tstamp) +{ + if (__USE_RTC()) { + int delta = get_rtcl() - (unsigned int) tstamp; + return delta < 0 ? delta + 1000000000 : delta; + } + return get_tbl() - tstamp; +} + +#define mulhwu(x,y) \ +({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) + +#ifdef CONFIG_PPC64 +#define mulhdu(x,y) \ +({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) +#else +extern u64 mulhdu(u64, u64); +#endif + +unsigned mulhwu_scale_factor(unsigned, unsigned); +void div128_by_32(u64 dividend_high, u64 dividend_low, + unsigned divisor, struct div_result *dr); + +/* Used to store Processor Utilization register (purr) values */ + +struct cpu_usage { + u64 current_tb; /* Holds the current purr register values */ +}; + +DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); + +#endif /* __KERNEL__ */ +#endif /* __PPC64_TIME_H */ diff --git a/include/asm-ppc64/time.h b/include/asm-ppc64/time.h deleted file mode 100644 index c6c762cad8b0..000000000000 --- a/include/asm-ppc64/time.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Common time prototypes and such for all ppc machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) to merge - * Paul Mackerras' version and mine for PReP and Pmac. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __PPC64_TIME_H -#define __PPC64_TIME_H - -#ifdef __KERNEL__ -#include -#include -#include - -#include -#include -#include - -/* time.c */ -extern unsigned long tb_ticks_per_jiffy; -extern unsigned long tb_ticks_per_usec; -extern unsigned long tb_ticks_per_sec; -extern unsigned long tb_to_xs; -extern unsigned tb_to_us; -extern unsigned long tb_last_stamp; - -struct rtc_time; -extern void to_tm(int tim, struct rtc_time * tm); -extern time_t last_rtc_update; - -void generic_calibrate_decr(void); -void setup_default_decr(void); - -/* Some sane defaults: 125 MHz timebase, 1GHz processor */ -extern unsigned long ppc_proc_freq; -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) -extern unsigned long ppc_tb_freq; -#define DEFAULT_TB_FREQ 125000000UL - -/* - * By putting all of this stuff into a single struct we - * reduce the number of cache lines touched by do_gettimeofday. - * Both by collecting all of the data in one cache line and - * by touching only one TOC entry - */ -struct gettimeofday_vars { - unsigned long tb_to_xs; - unsigned long stamp_xsec; - unsigned long tb_orig_stamp; -}; - -struct gettimeofday_struct { - unsigned long tb_ticks_per_sec; - struct gettimeofday_vars vars[2]; - struct gettimeofday_vars * volatile varp; - unsigned var_idx; - unsigned tb_to_us; -}; - -struct div_result { - unsigned long result_high; - unsigned long result_low; -}; - -int via_calibrate_decr(void); - -static __inline__ unsigned long get_tb(void) -{ - return mftb(); -} - -/* Accessor functions for the decrementer register. */ -static __inline__ unsigned int get_dec(void) -{ - return (mfspr(SPRN_DEC)); -} - -static __inline__ void set_dec(int val) -{ -#ifdef CONFIG_PPC_ISERIES - struct paca_struct *lpaca = get_paca(); - int cur_dec; - - if (lpaca->lppaca.shared_proc) { - lpaca->lppaca.virtual_decr = val; - cur_dec = get_dec(); - if (cur_dec > val) - HvCall_setVirtualDecr(); - } else -#endif - mtspr(SPRN_DEC, val); -} - -static inline unsigned long tb_ticks_since(unsigned long tstamp) -{ - return get_tb() - tstamp; -} - -#define mulhwu(x,y) \ -({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) -#define mulhdu(x,y) \ -({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) - - -unsigned mulhwu_scale_factor(unsigned, unsigned); -void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, - unsigned divisor, struct div_result *dr ); - -/* Used to store Processor Utilization register (purr) values */ - -struct cpu_usage { - u64 current_tb; /* Holds the current purr register values */ -}; - -DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); - -#endif /* __KERNEL__ */ -#endif /* __PPC64_TIME_H */ -- 2.30.2