From f59c303b59b7404e5da70b80b6340b199cb95650 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 26 May 2018 18:37:34 +0200 Subject: [PATCH] ARM: Fix i2c-gpio GPIO descriptor tables I used bad names in my clumsiness when rewriting many board files to use GPIO descriptors instead of platform data. A few had the platform_device ID set to -1 which would indeed give the device name "i2c-gpio". But several had it set to >=0 which gives the names "i2c-gpio.0", "i2c-gpio.1" ... Fix the offending instances in the ARM tree. Sorry for the mess. Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Cc: Wolfram Sang Cc: Simon Guinot Reported-by: Simon Guinot Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/mach-ep93xx/core.c | 2 +- arch/arm/mach-ixp4xx/avila-setup.c | 2 +- arch/arm/mach-ixp4xx/dsmg600-setup.c | 2 +- arch/arm/mach-ixp4xx/fsg-setup.c | 2 +- arch/arm/mach-ixp4xx/ixdp425-setup.c | 2 +- arch/arm/mach-ixp4xx/nas100d-setup.c | 2 +- arch/arm/mach-ixp4xx/nslu2-setup.c | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- arch/arm/mach-pxa/viper.c | 4 ++-- arch/arm/mach-sa1100/simpad.c | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index e70feec6fad5..0581ffbedddd 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -323,7 +323,7 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) /* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { /* Use local offsets on gpiochip/port "G" */ GPIO_LOOKUP_IDX("G", 1, NULL, 0, diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 77def6169f50..44cbbce6bda6 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -51,7 +51,7 @@ static struct platform_device avila_flash = { }; static struct gpiod_lookup_table avila_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 0f5c99941a7d..397190f3a8da 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -70,7 +70,7 @@ static struct platform_device dsmg600_flash = { }; static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 033f79b35d51..f0a152e365b1 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -56,7 +56,7 @@ static struct platform_device fsg_flash = { }; static struct gpiod_lookup_table fsg_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index b168e2fbdbeb..3ec829d52cdd 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -124,7 +124,7 @@ static struct platform_device ixdp425_flash_nand = { #endif /* CONFIG_MTD_NAND_PLATFORM */ static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 76dfff03cb71..4138d6aa4c52 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -102,7 +102,7 @@ static struct platform_device nas100d_leds = { }; static struct gpiod_lookup_table nas100d_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 91da63a7d7b5..341b263482ef 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -70,7 +70,7 @@ static struct platform_device nslu2_flash = { }; static struct gpiod_lookup_table nslu2_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 5877e547cecd..0adb1bd6208e 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -322,7 +322,7 @@ static struct soc_camera_link palmz72_iclink = { }; static struct gpiod_lookup_table palmz72_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 90d0f277de55..207dcc2e94e7 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -460,7 +460,7 @@ static struct platform_device smc91x_device = { /* i2c */ static struct gpiod_lookup_table viper_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.1", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), @@ -789,7 +789,7 @@ static int __init viper_tpm_setup(char *str) __setup("tpm=", viper_tpm_setup); struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.2", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index ace010479eb6..f45aed2519ba 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -327,7 +327,7 @@ static struct platform_device simpad_gpio_leds = { * i2c */ static struct gpiod_lookup_table simpad_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("gpio", 21, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), -- 2.30.2