From fa98e594220b86eb3632de478352e93ebf1201fa Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 May 2008 05:54:24 -0300 Subject: [PATCH] V4L/DVB (7938): pvrusb2: Increase enforced encoder wait delay to improve reliability The driver enforces a "quiet period" on the encoder in certain situations before attempting to operate it. This seems to help avoid video encoding errors / corruption. The quiet period was 50msec, but through experimentation it has been observed to improve further if the interval is increased to 100msec. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index d4d57951cca2..f30e13f6ee74 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -44,8 +44,10 @@ #define TIME_MSEC_DECODER_WAIT 50 /* This defines a minimum interval that the encoder must remain quiet - before we are allowed to configure it. */ -#define TIME_MSEC_ENCODER_WAIT 50 + before we are allowed to configure it. I had this originally set to + 50msec, but Martin Dauskardt reports that + things work better when it's set to 100msec. */ +#define TIME_MSEC_ENCODER_WAIT 100 /* This defines the minimum interval that the encoder must successfully run before we consider that the encoder has run at least once since its -- 2.30.2