From fb458864d9a78cc433fec7979acbe4078c82d7a8 Mon Sep 17 00:00:00 2001 From: Chanho Min Date: Tue, 26 Sep 2017 09:03:40 +0900 Subject: [PATCH] mmc: core: add driver strength selection when selecting hs400es The driver strength selection is missed and required when selecting hs400es. So, It is added here. Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support") Cc: stable@vger.kernel.org Signed-off-by: Hankyung Yu Signed-off-by: Chanho Min Reviewed-by: Adrian Hunter Reviewed-by: Shawn Lin Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index a7eb623f8daa..36217ad5e9b1 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1286,6 +1286,23 @@ out_err: return err; } +static void mmc_select_driver_type(struct mmc_card *card) +{ + int card_drv_type, drive_strength, drv_type; + + card_drv_type = card->ext_csd.raw_driver_strength | + mmc_driver_type_mask(0); + + drive_strength = mmc_select_drive_strength(card, + card->ext_csd.hs200_max_dtr, + card_drv_type, &drv_type); + + card->drive_strength = drive_strength; + + if (drv_type) + mmc_set_driver_type(card->host, drv_type); +} + static int mmc_select_hs400es(struct mmc_card *card) { struct mmc_host *host = card->host; @@ -1341,6 +1358,8 @@ static int mmc_select_hs400es(struct mmc_card *card) goto out_err; } + mmc_select_driver_type(card); + /* Switch card to HS400 */ val = EXT_CSD_TIMING_HS400 | card->drive_strength << EXT_CSD_DRV_STR_SHIFT; @@ -1374,23 +1393,6 @@ out_err: return err; } -static void mmc_select_driver_type(struct mmc_card *card) -{ - int card_drv_type, drive_strength, drv_type; - - card_drv_type = card->ext_csd.raw_driver_strength | - mmc_driver_type_mask(0); - - drive_strength = mmc_select_drive_strength(card, - card->ext_csd.hs200_max_dtr, - card_drv_type, &drv_type); - - card->drive_strength = drive_strength; - - if (drv_type) - mmc_set_driver_type(card->host, drv_type); -} - /* * For device supporting HS200 mode, the following sequence * should be done before executing the tuning process. -- 2.30.2