From fce9d33f51bf1d84270238885c2712d48a056e41 Mon Sep 17 00:00:00 2001 From: Andrew Gabbasov Date: Wed, 1 Oct 2014 07:14:08 -0500 Subject: [PATCH] mmc: sdhci: fix error conditions for controller reset Add the case of SET_BLOCK_COUNT command error to the error conditions check for making a controller reset at request handling finish. Otherwise, if the SET_BLOCK_COUNT command failed, e.g. with a timeout, the controller state was not reset, and the next command failed too. In the case of data error the controller reset is already done in finish_data() function before sending stop command (if present), so the finish tasklet should make a reset after data error only if no stop command existed in the request. Also, fix the indentation of this condition check to make it more logical. Signed-off-by: Andrew Gabbasov Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 179ce06eec73..062222abf3df 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2144,9 +2144,10 @@ static void sdhci_tasklet_finish(unsigned long param) */ if (!(host->flags & SDHCI_DEVICE_DEAD) && ((mrq->cmd && mrq->cmd->error) || - (mrq->data && (mrq->data->error || - (mrq->data->stop && mrq->data->stop->error))) || - (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { + (mrq->sbc && mrq->sbc->error) || + (mrq->data && ((mrq->data->error && !mrq->data->stop) || + (mrq->data->stop && mrq->data->stop->error))) || + (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { /* Some controllers need this kick or reset won't work here */ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) -- 2.30.2