From fd71f807376437756bfab0ee21d5978a7b05a0f5 Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Mon, 10 Feb 2014 13:12:55 +0100 Subject: [PATCH] ath10k: AP: handle HT station which does not have HT RX MCS This is a workaround for HT-enabled STAs which break the spec and have no HT capabilities RX mask (no HT RX MCS map). As per spec, in section 20.3.5 Modulation and coding scheme (MCS), MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs. Firmware asserts if such situation occurs. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index b2c65904449c..1c305b10e477 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1148,8 +1148,23 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar, if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8)) arg->peer_ht_rates.rates[n++] = i; - arg->peer_ht_rates.num_rates = n; - arg->peer_num_spatial_streams = sta->rx_nss; + /* + * This is a workaround for HT-enabled STAs which break the spec + * and have no HT capabilities RX mask (no HT RX MCS map). + * + * As per spec, in section 20.3.5 Modulation and coding scheme (MCS), + * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs. + * + * Firmware asserts if such situation occurs. + */ + if (n == 0) { + arg->peer_ht_rates.num_rates = 8; + for (i = 0; i < arg->peer_ht_rates.num_rates; i++) + arg->peer_ht_rates.rates[i] = i; + } else { + arg->peer_ht_rates.num_rates = n; + arg->peer_num_spatial_streams = sta->rx_nss; + } ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n", arg->addr, -- 2.30.2