From feca7746d5d9e84b105a613b7f3b6ad00d327372 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 1 Mar 2013 10:51:15 -0500 Subject: [PATCH] USB: EHCI: don't check DMA values in QH overlays This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern Reported-by: Joseph Salisbury Reported-and-tested-by: Stephen Thirlwall CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 7bf2b4eeb9ce..5464665f0b6a 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -135,7 +135,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) * qtd is updated in qh_completions(). Update the QH * overlay here. */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { + if (qh->hw->hw_token & ACTIVE_BIT(ehci)) { qh->hw->hw_qtd_next = qtd->hw_next; qtd = NULL; } @@ -449,11 +449,19 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) else if (last_status == -EINPROGRESS && !urb->unlinked) continue; - /* qh unlinked; token in overlay may be most current */ - if (state == QH_STATE_IDLE - && cpu_to_hc32(ehci, qtd->qtd_dma) - == hw->hw_current) { + /* + * If this was the active qtd when the qh was unlinked + * and the overlay's token is active, then the overlay + * hasn't been written back to the qtd yet so use its + * token instead of the qtd's. After the qtd is + * processed and removed, the overlay won't be valid + * any more. + */ + if (state == QH_STATE_IDLE && + qh->qtd_list.next == &qtd->qtd_list && + (hw->hw_token & ACTIVE_BIT(ehci))) { token = hc32_to_cpu(ehci, hw->hw_token); + hw->hw_token &= ~ACTIVE_BIT(ehci); /* An unlink may leave an incomplete * async transaction in the TT buffer. -- 2.30.2