From fff4441135ed9290eb2f947f931b826a60d6c167 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Mon, 28 Aug 2023 00:13:05 +0100
Subject: [PATCH] uboot-mediatek: add builds for UniFi 6 LR v2 and v3

While the v2 is nearly identical to v1, v3 uses a different PHY and
needs a different build for Ethernet to work in U-Boot.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 package/boot/uboot-mediatek/Makefile          |  34 +-
 .../patches/412-add-ubnt-unifi-6-lr.patch     | 620 +++++++++++++++++-
 2 files changed, 641 insertions(+), 13 deletions(-)

diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile
index a04e629f12..021d444a97 100644
--- a/package/boot/uboot-mediatek/Makefile
+++ b/package/boot/uboot-mediatek/Makefile
@@ -124,10 +124,34 @@ define U-Boot/mt7622_bananapi_bpi-r64-snand
   DEPENDS:=+trusted-firmware-a-mt7622-snand-2ddr
 endef
 
-define U-Boot/mt7622_ubnt_unifi-6-lr
+define U-Boot/mt7622_ubnt_unifi-6-lr-v1
   NAME:=Ubiquiti UniFi 6 LR
-  UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr
-  BUILD_DEVICES:=ubnt_unifi-6-lr-v1-ubootmod ubnt_unifi-6-lr-v2-ubootmod
+  UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr-v1
+  BUILD_DEVICES:=ubnt_unifi-6-lr-v1-ubootmod
+  BUILD_SUBTARGET:=mt7622
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=nor
+  BL2_DDRBLOB:=2
+  DEPENDS:=+trusted-firmware-a-mt7622-nor-2ddr
+  FIP_COMPRESS:=1
+endef
+
+define U-Boot/mt7622_ubnt_unifi-6-lr-v2
+  NAME:=Ubiquiti UniFi 6 LR v2
+  UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr-v2
+  BUILD_DEVICES:=ubnt_unifi-6-lr-v2-ubootmod
+  BUILD_SUBTARGET:=mt7622
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=nor
+  BL2_DDRBLOB:=2
+  DEPENDS:=+trusted-firmware-a-mt7622-nor-2ddr
+  FIP_COMPRESS:=1
+endef
+
+define U-Boot/mt7622_ubnt_unifi-6-lr-v3
+  NAME:=Ubiquiti UniFi 6 LR v3
+  UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr-v3
+  BUILD_DEVICES:=ubnt_unifi-6-lr-v3-ubootmod
   BUILD_SUBTARGET:=mt7622
   UBOOT_IMAGE:=u-boot.fip
   BL2_BOOTDEV:=nor
@@ -392,7 +416,9 @@ UBOOT_TARGETS := \
 	mt7622_bananapi_bpi-r64-snand \
 	mt7622_linksys_e8450 \
 	mt7622_rfb1 \
-	mt7622_ubnt_unifi-6-lr \
+	mt7622_ubnt_unifi-6-lr-v1 \
+	mt7622_ubnt_unifi-6-lr-v2 \
+	mt7622_ubnt_unifi-6-lr-v3 \
 	mt7623n_bpir2 \
 	mt7623a_unielec_u7623 \
 	mt7628_rfb \
diff --git a/package/boot/uboot-mediatek/patches/412-add-ubnt-unifi-6-lr.patch b/package/boot/uboot-mediatek/patches/412-add-ubnt-unifi-6-lr.patch
index 4bde061765..aad6c53b9b 100644
--- a/package/boot/uboot-mediatek/patches/412-add-ubnt-unifi-6-lr.patch
+++ b/package/boot/uboot-mediatek/patches/412-add-ubnt-unifi-6-lr.patch
@@ -1,5 +1,5 @@
 --- /dev/null
-+++ b/configs/mt7622_ubnt_unifi-6-lr_defconfig
++++ b/configs/mt7622_ubnt_unifi-6-lr-v1_defconfig
 @@ -0,0 +1,147 @@
 +CONFIG_ARM=y
 +CONFIG_POSITION_INDEPENDENT=y
@@ -149,6 +149,305 @@
 +CONFIG_USE_SERVERIP=y
 +CONFIG_SERVERIP="192.168.1.254"
 --- /dev/null
++++ b/configs/mt7622_ubnt_unifi-6-lr-v2_defconfig
+@@ -0,0 +1,147 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7622=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_LOAD_ADDR=0x40080000
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTDPARTS_DEFAULT="mtdparts=nor0:128k(bl2),640k(fip),64k(u-boot-env),256k(factory),64k(eeprom),15232k(recovery),-(firmware)"
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="nor0"
++CONFIG_ENV_SIZE_REDUND=0x4000
++CONFIG_ENV_SIZE=0x4000
++CONFIG_ENV_OFFSET=0xc0000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_RESET_BUTTON_SETTLE_DELAY=400
++CONFIG_BOOTP_SEND_HOSTNAME=y
++CONFIG_DEFAULT_ENV_FILE="ubnt_unifi-6-lr-v2_env"
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=25000000
++CONFIG_DEFAULT_DEVICE_TREE="mt7622-ubnt-unifi-6-lr"
++CONFIG_DEBUG_UART=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_DEFAULT_FDT_FILE="mt7622-ubnt-unifi-6-lr"
++CONFIG_SYS_PROMPT="MT7622> "
++# CONFIG_LEGACY_IMAGE_FORMAT is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_EFI is not set
++# CONFIG_EFI_LOADER is not set
++CONFIG_CMD_BOOTMENU=y
++# CONFIG_CMD_BOOTEFI is not set
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++# CONFIG_CMD_ELF is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_MTDPARTS=y
++# CONFIG_CMD_PCI is not set
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++# CONFIG_CMD_UNLZ4 is not set
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_ETH=y
++CONFIG_DM_ETH_PHY=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_MDIO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++# CONFIG_DM_MMC is not set
++CONFIG_DM_SERIAL=y
++CONFIG_DM_SPI=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_HUSH_PARSER=y
++# CONFIG_PARTITION_UUIDS is not set
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++# CONFIG_LED is not set
++# CONFIG_LZ4 is not set
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_PHYLIB_10G=y
++CONFIG_PHY_AQUANTIA=y
++CONFIG_PHY_ADDR_ENABLE=y
++CONFIG_PHY_ADDR=8
++CONFIG_MEDIATEK_ETH=y
++CONFIG_MTD=y
++# CONFIG_MMC is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_MTK_SNFI_SPI=y
++CONFIG_MTK_SNOR=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_SPI_FLASH=y
++CONFIG_SPI_FLASH_BAR=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_SPI_FLASH_UNLOCK_ALL=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_SST=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_USE_4K_SECTORS=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/configs/mt7622_ubnt_unifi-6-lr-v3_defconfig
+@@ -0,0 +1,146 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7622=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_LOAD_ADDR=0x40080000
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTDPARTS_DEFAULT="mtdparts=nor0:128k(bl2),640k(fip),64k(u-boot-env),256k(factory),64k(eeprom),15232k(recovery),-(firmware)"
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="nor0"
++CONFIG_ENV_SIZE_REDUND=0x4000
++CONFIG_ENV_SIZE=0x4000
++CONFIG_ENV_OFFSET=0xc0000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_RESET_BUTTON_SETTLE_DELAY=400
++CONFIG_BOOTP_SEND_HOSTNAME=y
++CONFIG_DEFAULT_ENV_FILE="ubnt_unifi-6-lr_env"
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=25000000
++CONFIG_DEFAULT_DEVICE_TREE="mt7622-ubnt-unifi-6-lr-v3"
++CONFIG_DEBUG_UART=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_DEFAULT_FDT_FILE="mt7622-ubnt-unifi-6-lr-v3"
++CONFIG_SYS_PROMPT="MT7622> "
++# CONFIG_LEGACY_IMAGE_FORMAT is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_EFI is not set
++# CONFIG_EFI_LOADER is not set
++CONFIG_CMD_BOOTMENU=y
++# CONFIG_CMD_BOOTEFI is not set
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++# CONFIG_CMD_ELF is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_MTDPARTS=y
++# CONFIG_CMD_PCI is not set
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++# CONFIG_CMD_UNLZ4 is not set
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_ETH=y
++CONFIG_DM_ETH_PHY=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_MDIO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++# CONFIG_DM_MMC is not set
++CONFIG_DM_SERIAL=y
++CONFIG_DM_SPI=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_HUSH_PARSER=y
++# CONFIG_PARTITION_UUIDS is not set
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++# CONFIG_LED is not set
++# CONFIG_LZ4 is not set
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_PHY_REALTEK=y
++CONFIG_PHY_ADDR_ENABLE=y
++CONFIG_PHY_ADDR=0
++CONFIG_MEDIATEK_ETH=y
++CONFIG_MTD=y
++# CONFIG_MMC is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_MTK_SNFI_SPI=y
++CONFIG_MTK_SNOR=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_SPI_FLASH=y
++CONFIG_SPI_FLASH_BAR=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_SPI_FLASH_UNLOCK_ALL=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_SST=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_USE_4K_SECTORS=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
 +++ b/arch/arm/dts/mt7622-ubnt-unifi-6-lr.dts
 @@ -0,0 +1,193 @@
 +// SPDX-License-Identifier: GPL-2.0
@@ -165,8 +464,204 @@
 +/ {
 +	#address-cells = <1>;
 +	#size-cells = <1>;
-+	model = "mt7622-ubnt-unifi-6-lr";
-+	compatible = "mediatek,mt7622", "ubnt,unifi-6-lr";
++	model = "mt7622-ubnt-unifi-6-lr";
++	compatible = "mediatek,mt7622", "ubnt,unifi-6-lr";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	aliases {
++		spi0 = &snor;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			gpios = <&gpio 62 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_5v: regulator-5v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-5V";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++};
++
++&pcie {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
++	status = "okay";
++
++	pcie@0,0 {
++		status = "okay";
++	};
++
++	pcie@1,0 {
++		status = "okay";
++	};
++};
++
++&pinctrl {
++	eth_pins: eth-pins {
++		mux {
++			function = "eth";
++			groups = "mdc_mdio", "rgmii_via_gmac2";
++		};
++	};
++
++	pcie0_pins: pcie0-pins {
++		mux {
++			function = "pcie";
++			groups = "pcie0_pad_perst",
++				 "pcie0_1_waken",
++				 "pcie0_1_clkreq";
++		};
++	};
++
++	pcie1_pins: pcie1-pins {
++		mux {
++			function = "pcie";
++			groups = "pcie1_pad_perst",
++				 "pcie1_0_waken",
++				 "pcie1_0_clkreq";
++		};
++	};
++
++	snfi_pins: snfi-pins {
++		mux {
++			function = "flash";
++			groups = "snfi";
++		};
++	};
++
++	snor_pins: snor-pins {
++		mux {
++			function = "flash";
++			groups = "spi_nor";
++		};
++	};
++
++	uart0_pins: uart0 {
++		mux {
++			function = "uart";
++			groups = "uart0_0_tx_rx" ;
++		};
++	};
++
++	watchdog_pins: watchdog-default {
++		mux {
++			function = "watchdog";
++			groups = "watchdog";
++		};
++	};
++};
++
++&snor {
++	pinctrl-names = "default";
++	pinctrl-0 = <&snor_pins>;
++	status = "okay";
++
++	spi-flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-tx-bus-width = <1>;
++		spi-rx-bus-width = <4>;
++		u-boot,dm-pre-reloc;
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	pinctrl-names = "default";
++	pinctrl-0 = <&watchdog_pins>;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&eth_pins>;
++
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	phy-handle = <&gphy>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++
++	mdio-bus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		gphy: ethernet-phy@8 {
++			/* Marvell AQRate AQR112W - no driver */
++			compatible = "ethernet-phy-ieee802.3-c45";
++			reg = <0x8>;
++		};
++	};
++};
+--- /dev/null
++++ b/arch/arm/dts/mt7622-ubnt-unifi-6-lr-v3.dts
+@@ -0,0 +1,193 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2019 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include "mt7622.dtsi"
++#include "mt7622-u-boot.dtsi"
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "mt7622-ubnt-unifi-6-lr-v3";
++	compatible = "mediatek,mt7622", "ubnt,unifi-6-lr-v3";
 +
 +	chosen {
 +		stdout-path = &uart0;
@@ -325,7 +820,7 @@
 +	pinctrl-0 = <&eth_pins>;
 +
 +	mediatek,gmac-id = <0>;
-+	phy-mode = "2500base-x";
++	phy-mode = "sgmii";
 +	phy-handle = <&gphy>;
 +
 +	fixed-link {
@@ -337,20 +832,21 @@
 +		#address-cells = <1>;
 +		#size-cells = <0>;
 +
-+		gphy: ethernet-phy@8 {
-+			/* Marvell AQRate AQR112W - no driver */
-+			compatible = "ethernet-phy-ieee802.3-c45";
-+			reg = <0x8>;
++		gphy: ethernet-phy@0 {
++			/* RealTek RTL8211FS */
++			compatible = "ethernet-phy-ieee802.3-c22";
++			reg = <0x0>;
 +		};
 +	};
 +};
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -1306,6 +1306,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+@@ -1306,6 +1306,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
  	mt7623a-unielec-u7623-02-emmc.dtb \
  	mt7622-bananapi-bpi-r64.dtb \
  	mt7622-linksys-e8450-ubi.dtb \
 +	mt7622-ubnt-unifi-6-lr.dtb \
++	mt7622-ubnt-unifi-6-lr-v3.dtb \
  	mt7623n-bananapi-bpi-r2.dtb \
  	mt7629-rfb.dtb \
  	mt7981-rfb.dtb \
@@ -407,6 +903,112 @@
 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run ethaddr_factory ; run _init_env ; run boot_first
 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
+--- /dev/null
++++ b/ubnt_unifi-6-lr-v2_env
+@@ -0,0 +1,50 @@
++ethaddr_factory=mtd read nor0 $loadaddr 0x110000 0x10000 && env readmem -b ethaddr $loadaddr 0x6 ; setenv ethaddr_factory
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x48000000
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi
++bootdelay=0
++bootfile=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v2-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v2-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v2-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v2-ubootmod-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from flash.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from flash.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to flash.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to flash.=run boot_tftp_write_preloader ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=run nor_read_production && bootm $loadaddr
++boot_recovery=run nor_read_recovery ; bootm $loadaddr
++boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip
++boot_serial_write_preloader=loadx $loadaddr 115200 && run boot_write_preloader
++boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip
++boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader
++boot_nor=run boot_production ; run boot_recovery
++boot_write_fip=mtd erase nor0 0x20000 0x80000 && mtd write nor0 $loadaddr 0x20000 0x80000
++boot_write_preloader=mtd erase nor0 0x0 0x20000 && mtd write nor0 $loadaddr 0x0 0x20000
++reset_factory=mtd erase nor0 0xc0000 0x10000 && reset
++nor_read_production=mtd read nor0 $loadaddr 0x1000000 0x1000 && imsz $loadaddr image_size && mtd read nor0 $loadaddr 0x1000000 $image_size
++nor_read_recovery=mtd read nor0 $loadaddr 0x120000 0x1000 && imsz $loadaddr image_size && mtd read nor0 $loadaddr 0x120000 $image_size
++nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x1000 ; setexpr tmp1 0x$image_size % 0x1000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb 0x$image_eb * 0x1000
++nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase nor0 0x1000000 0x$image_eb && mtd write nor0 $loadaddr 0x1000000 $filesize
++nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0xee0000 && mtd erase nor0 0x120000 0x$image_eb && mtd write nor0 $loadaddr 0x120000 $filesize
++_init_env=setenv _init_env ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run ethaddr_factory ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"--- /dev/null
+--- /dev/null
++++ b/ubnt_unifi-6-lr-v3_env
+@@ -0,0 +1,50 @@
++ethaddr_factory=mtd read nor0 $loadaddr 0x110000 0x10000 && env readmem -b ethaddr $loadaddr 0x6 ; setenv ethaddr_factory
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x48000000
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi
++bootdelay=0
++bootfile=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v3-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v3-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v3-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-v3-ubootmod-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from flash.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from flash.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to flash.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to flash.=run boot_tftp_write_preloader ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=run nor_read_production && bootm $loadaddr
++boot_recovery=run nor_read_recovery ; bootm $loadaddr
++boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip
++boot_serial_write_preloader=loadx $loadaddr 115200 && run boot_write_preloader
++boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip
++boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader
++boot_nor=run boot_production ; run boot_recovery
++boot_write_fip=mtd erase nor0 0x20000 0x80000 && mtd write nor0 $loadaddr 0x20000 0x80000
++boot_write_preloader=mtd erase nor0 0x0 0x20000 && mtd write nor0 $loadaddr 0x0 0x20000
++reset_factory=mtd erase nor0 0xc0000 0x10000 && reset
++nor_read_production=mtd read nor0 $loadaddr 0x1000000 0x1000 && imsz $loadaddr image_size && mtd read nor0 $loadaddr 0x1000000 $image_size
++nor_read_recovery=mtd read nor0 $loadaddr 0x120000 0x1000 && imsz $loadaddr image_size && mtd read nor0 $loadaddr 0x120000 $image_size
++nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x1000 ; setexpr tmp1 0x$image_size % 0x1000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb 0x$image_eb * 0x1000
++nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase nor0 0x1000000 0x$image_eb && mtd write nor0 $loadaddr 0x1000000 $filesize
++nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0xee0000 && mtd erase nor0 0x120000 0x$image_eb && mtd write nor0 $loadaddr 0x120000 $filesize
++_init_env=setenv _init_env ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run ethaddr_factory ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 --- a/common/board_r.c
 +++ b/common/board_r.c
 @@ -66,6 +66,7 @@
-- 
2.30.2