openwrt/staging/blogic.git
2015-11-10 Jack Wangisci: remove SCSI host before detaching from SAS transport
2015-11-10 Gabriel Krisman... ipr: Driver version 2.6.3.
2015-11-10 Gabriel Krisman... ipr: Issue Configure Cache Parameters command.
2015-11-10 Gabriel Krisman... ipr: Inquiry IOA page 0xC4 during initialization.
2015-11-10 Gabriel Krisman... ipr: Don't set NO_ULEN_CHK bit when resource is a vset.
2015-11-10 Gabriel Krisman... ipr: Add delay to ensure coherent dumps.
2015-11-09 Yaniv Gardiscsi: ufs-qcom: add QUniPro hardware support and power...
2015-11-09 Yaniv Gardiscsi: ufs-qcom: add debug prints for test bus
2015-11-09 Yaniv Gardiscsi: ufs: make the UFS variant a platform device
2015-11-09 Yaniv Gardiscsi: ufs: creates wrapper functions for vops
2015-11-09 Yaniv Gardiscsi: ufs: add ufshcd_get_variant ufshcd_set_variant
2015-11-09 Yaniv Gardiscsi: ufs-qcom: update configuration option of SCSI_UFS...
2015-11-09 Yaniv Gardiscsi: ufs-qcom: fix compilation warning if compiled...
2015-11-09 Yaniv Gardiphy: qcom-ufs: fix build error when the component is...
2015-11-09 Tomas Henzlhpsa: move lockup_detected attribute to host attr
2015-11-09 Don Bracehpsa: bump the driver version
2015-11-09 Kevin Barnetthpsa: add in sas transport class
2015-11-09 Rasmus Villemoeshpsa: fix multiple issues in path_info_show
2015-11-09 Don Bracehpsa: enhance device messages
2015-11-09 Scott Teelhpsa: disable report lun data caching
2015-11-09 Scott Teelhpsa: add discovery polling for PT RAID devices.
2015-11-09 Scott Teelhpsa: eliminate fake lun0 enclosures
2015-11-09 Scott Teelhpsa: generalize external arrays
2015-11-09 Kevin Barnetthpsa: move scsi_add_device and scsi_remove_device calls...
2015-11-09 Kevin Barnetthpsa: refactor hpsa_figure_bus_target_lun
2015-11-09 Don Bracehpsa: enhance hpsa_get_device_id
2015-11-09 Kevin Barnetthpsa: add function is_logical_device
2015-11-09 Kevin Barnetthpsa: simplify update scsi devices
2015-11-09 Kevin Barnetthpsa: simplify check for device exposure
2015-11-09 Don Bracehpsa: correct ioaccel2 sg chain len
2015-11-09 Don Bracehpsa: correct check for non-disk devices
2015-11-09 Scott Teelhpsa: fix physical target reset
2015-11-09 Don Bracehpsa: fix hpsa_adjust_hpsa_scsi_table
2015-11-09 Don Bracehpsa: correct transfer length for 6 byte read/write...
2015-11-09 Don Bracehpsa: abandon rescans on memory alloaction failures.
2015-11-09 Don Bracehpsa: allow driver requested rescans
2015-11-09 Don Bracehpsa: fix null device issues
2015-11-09 Don Bracehpsa: check for null arguments to dev_printk
2015-11-09 Don Bracehpsa: change devtype to unsigned
2015-11-09 Don Bracehpsa: remove unused hpsa_tag_discard_error_bits
2015-11-09 Don Bracehpsa: stop zeroing reset_cmds_out and ioaccel_cmds_out...
2015-11-09 Don Bracehpsa: remove unused parameter hostno
2015-11-09 Peter Oberparleiterscsi_sysfs: Fix queue_ramp_up_period return code
2015-11-09 Johannes Thumshirnscsi: Export SCSI Inquiry data to sysfs
2015-11-09 Sumit Saxenamegaraid_sas: Fix sparse warning
2015-11-09 Sumit Saxenamegaraid_sas: Make tape drives visible on PERC5 controllers
2015-11-03 Calvin Owenssg: Fix double-free when drives detach during SG_IO
2015-11-03 Benjamin Roodpm80xx: avoid a panic if MSI(X) interrupts are disabled
2015-11-03 Benjamin Roodpm80xx: wait a minimum of 500ms before issuing commands...
2015-11-03 Benjamin Roodpm80xx: do not examine registers for iButton feature...
2015-11-03 Benjamin Roodpm80xx: set PHY profiles for ATTO 12Gb SAS controllers
2015-11-03 Benjamin Roodpm80xx: add support for ATTO devices during SAS address...
2015-11-03 Benjamin Roodpm80xx: add ATTO PCI IDs to pm8001_pci_table
2015-11-03 Benjamin Roodpm80xx: add support for PMC Sierra 8070 and PMC Sierra...
2015-11-03 Benjamin Roodpm80xx: configure PHY settings based on subsystem vendor ID
2015-11-03 Brian KingSCSI: Increase REPORT_LUNS timeout
2015-11-03 sumit.saxena... megaraid_sas : Remove debug print from function megasas...
2015-11-03 sumit.saxena... megaraid_sas : Driver version upgrade
2015-11-03 sumit.saxena... megaraid_sas : SMAP restriction--do not access user...
2015-10-29 sumit.saxena... megaraid_sas: Make PI enabled VD 8 byte DMA aligned
2015-10-29 sumit.saxena... megaraid_sas: Initialize tasklet before setting up...
2015-10-29 sumit.saxena... megaraid_sas: Indicate online firmware upgrade support...
2015-10-29 sumit.saxena... megaraid_sas: Update OCR capability on controller prope...
2015-10-29 sumit.saxena... megaraid_sas: Do not use PAGE_SIZE for max_sectors
2015-10-29 sumit.saxena... megaraid_sas: Support for Cutlass (12 Gbps) controller
2015-10-29 sumit.saxena... megaraid_sas: Support for Intruder (12 Gbps) controller
2015-10-29 sumit.saxena... megaraid_sas: Remove PCI id checks
2015-10-29 sumit.saxena... megaraid_sas: Expose TAPE drives unconditionally
2015-10-29 sumit.saxena... megaraid_sas: Version update
2015-10-29 sumit.saxena... megaraid_sas: Code refactor for use of requestorId
2015-10-29 sumit.saxena... megaraid_sas: Fix validHandles check in I/O path
2015-10-29 sumit.saxena... megaraid_sas: Print critical firmware event messages
2015-10-29 sumit.saxena... megaraid_sas: Chip reset if driver fails to get IOC...
2015-10-29 sumit.saxena... megaraid_sas: Support for max_io_size 1MB
2015-10-29 sumit.saxena... megaraid_sas: Code cleanup-use local variable drv_ops...
2015-10-29 sumit.saxena... megaraid_sas: JBOD sequence number support
2015-10-29 sumit.saxena... megaraid_sas: Increase timeout to 60 secs for abort...
2015-10-29 sumit.saxena... megaraid_sas: Synchronize driver headers with firmware...
2015-10-27 Alan SternSCSI: fix bug in scsi_dev_info_list matching
2015-10-27 Alan SternSCSI: refactor device-matching code in scsi_devinfo.c
2015-10-27 Maurizio Lombardifnic: check pci_map_single() return value
2015-10-27 Ketan Mukadambe2iscsi: Revert ownership to Emulex
2015-10-27 Ketan MukadamMAINTAINERS: Update be2iscsi driver
2015-10-27 Shirish Pargaonkarbnx2fc: Do not log error for netevents that need no...
2015-10-27 James Smartlpfc: Update version to 11.0.0.0 for upstream patch set
2015-10-27 James Smartlpfc: Fix default RA_TOV and ED_TOV in the FC/FCoE...
2015-10-27 James Smartlpfc: The linux driver does not reinitiate discovery...
2015-10-27 James Smartlpfc: Fix for discovery failure in PT2PT when FLOGI...
2015-10-27 James Smartlpfc: Add support for Lancer G6 and 32G FC links
2015-10-27 Ales Novakfix: lpfc_send_rscn_event sends bigger buffer size
2015-10-27 Sebastian Herbsztlpfc: remove set but not used variables
2015-10-27 Nicholas Krauselpfc:Make the function lpfc_sli4_mbox_completions_pendi...
2015-10-27 Ian MitchellFix kmalloc overflow in LPFC driver at large core count
2015-10-27 Johannes Thumshirnlpfc: Destroy lpfc_hba_index IDR on module exit
2015-10-27 Bodo Stroesserlpfc: in sli3 use configured sg_seg_cnt for sg_tablesize
2015-10-27 Firo Yanglpfc: Remove unnessary cast
2015-10-27 Sebastian Herbsztlpfc: fix model description
2015-10-07 Christoph Hellwig3w-9xxx: don't unmap bounce buffered commands
2015-10-01 Paul Mackerrasscsi_dh: Use the correct module name when loading devic...
2015-09-17 Ariel Nahumlibiscsi: Fix iscsi_check_transport_timeouts possible...
next