openwrt/staging/blogic.git
2011-09-14 Helmut Schaart2x00: Forbid aggregation for STAs not programmed...
2011-09-14 Helmut Schaart2x00: Make use of sta_add/remove callbacks in rt2800
2011-09-14 Helmut Schaart2x00: Add WCID to HT TX descriptor
2011-09-14 Helmut Schaart2x00: Add WCID to crypto struct
2011-09-14 Helmut Schaart2x00: Introduce sta_add/remove callbacks
2011-09-14 Helmut Schaart2x00: Move bssidx calculation into its own function
2011-09-14 Shahar Levimac80211: Update device channel in case of HW channel...
2011-09-14 Javier Cardonamac80211: Mark all mesh stations as QoS capable
2011-09-14 Javier Cardonamac80211: Mesh data frames must have the QoS header
2011-09-14 Javier Cardonamac80211: Start implementing QoS support for mesh inter...
2011-09-14 Helmut Schaart2x00: Avoid unnecessary uncached
2011-09-14 Helmut Schaart2x00: Update some TX descriptor
2011-09-14 Helmut Schaart2x00: Remove incorrect led blink
2011-09-14 Helmut Schaart2x00: Add LED_CFG register description
2011-09-14 Helmut Schaart2x00: Minor optimizazion in txdone path
2011-09-14 Johannes Bergcfg80211: verify format of uAPSD information
2011-09-14 Emmanuel Grumbachiwlagn: fix compilation when debug flags is unset
2011-09-14 Wey-Yi Guyiwlagn: remove lines from the wrong place
2011-09-14 Wey-Yi Guyiwlagn: enable 11n support for "_d" sku
2011-09-14 Wey-Yi Guyiwlagn: disply queue read/write pointer when stuck
2011-09-14 Emmanuel Grumbachiwlagn: iwl-trans.c can't dereference iwl_priv any...
2011-09-14 Emmanuel Grumbachiwlagn: move traffic_log back to upper layer
2011-09-14 Emmanuel Grumbachiwlagn: clean up of transport layer
2011-09-14 Emmanuel Grumbachiwlagn: remove priv dereferences from the transport...
2011-09-14 Emmanuel Grumbachiwlagn: merge iwl_pci_down and iwl_pci_remove
2011-09-14 Wey-Yi Guyiwlagn: only perform necessary calibration at init...
2011-09-14 Rajkumar Manoharanath9k_hw: Fix magnitude/phase average in TxIQ Calibration
2011-09-14 Rajkumar Manoharanath9k: Move cycle conters under cc_lock
2011-09-14 Rajkumar Manoharanath9k: Take the samples in unassociated state
2011-09-14 Johannes Bergmac80211: further optimise buffer expiry timer
2011-09-14 Rafał Miłeckib43: N-PHY: implement few random missing ops
2011-09-14 Rafał Miłeckib43: N-PHY: split workarounds into per-PHY-ver functions
2011-09-14 Rafał Miłeckib43: N-PHY: replace some hacks with nice tables ops
2011-09-14 Rafał Miłeckib43: N-PHY: use helper for checking IPA
2011-09-14 Arik Nemtsovmac80211: add ssid config to bss information in AP...
2011-09-14 Rafał Miłeckib43: LCN-PHY: load TX gain table on init
2011-09-14 Rafał Miłeckib43: add my copyrights and myself as the module author
2011-09-14 Rafał Miłeckib43: drop Copyright for not really copyrightable info
2011-09-14 Christian Lamparterminstrel_ht: fix Open BA session request floods
2011-09-14 Felix Fietkauath9k: implement .get_antenna and .set_antenna
2011-09-14 Felix Fietkauath9k: merge reset related functions
2011-09-14 Felix Fietkauath9k: always call ath_reset from workqueue context
2011-09-14 Felix Fietkauath9k: move a few functions around
2011-09-14 Felix Fietkauath9k: eliminate common->{rx,tx}_chainmask
2011-09-14 Rajkumar Manoharanmac80211: stop tx before doing hw config and rate update
2011-09-14 Rafał Miłeckib43: N-PHY: implement enabling TX power control
2011-09-14 Javier Cardonamac80211: Stop forwarding mesh traffic when tx queues...
2011-09-14 Thomas Pedersenmac80211: check if mesh frame is in RMC after decrypt
2011-09-14 Felix Fietkaumac80211: make ieee80211_send_bar available for drivers
2011-09-14 Sven Neumanncfg80211: reorder code to obsolete forward declaration
2011-09-14 Sven Neumanncfg80211: hold reg_mutex when updating regulatory
2011-09-13 Pavel Roskincfg80211: print bandwidth in chan_reg_rule_print_dbg()
2011-09-13 Bill Jordanath9k: ath9k_hw_set_txpowerlimit sets previous txpower
2011-09-13 Rafał Miłeckib43: LCN-PHY: add conditions for few operations
2011-09-13 Rafał Miłeckib43: LCN-PHY: rename functions, get rid of magic names
2011-09-13 Rafał Miłeckib43: LCN-PHY: upload additional 0x7 table
2011-09-13 Rafał Miłeckib43: LCN-PHY: rewrite 0x7 table at the end of init
2011-09-13 Rafał Miłeckib43: LCN-PHY: put tables functions in correct file
2011-09-13 Rafał Miłeckib43: LCN-PHY: minor fixes
2011-09-13 zero.linrt2x00: Add new chipset support
2011-09-13 Luciano Coelhonl80211/cfg80211: add match filtering for sched_scan
2011-09-13 Eliad Pellernl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag
2011-09-13 Dan Carpenteriwlwifi: signedness bug in iwl_trans_pcie_tx_agg_alloc()
2011-09-13 Dan Carpenteriwlwifi: fix double assign in iwl_start_tx_ba_trans_ready()
2011-09-13 Rajkumar Manoharanath9k_hw: Fix rx latency of 11a mode
2011-09-13 Dan Carpentermac80211: handle allocation failures in mesh_pathtbl_init()
2011-09-13 Arik Nemtsovmac80211: add flag to indicate HW only Tx-agg setup...
2011-09-13 Joe Percheswireless: Remove unnecessary OOM logging messages
2011-09-13 Joe Perchesrfkill: Remove unnecessary OOM logging messages
2011-09-13 Joe Perchesmac80211: Remove unnecessary OOM logging messages
2011-09-13 Javier Cardonamac80211: Consolidate mesh path duplicated functions
2011-09-13 Javier Cardonamac80211: Consolidate {mesh,mpp}_path_flush into one...
2011-09-13 Javier Cardonamac80211: Don't iterate twice over all mpaths when...
2011-09-13 Javier Cardonamac80211: Remove redundant mesh path expiration checks
2011-09-13 Javier Cardonamac80211: Improve mpath state locking
2011-09-13 Javier Cardonamac80211: Remove mesh paths when an interface is removed
2011-09-13 Javier Cardonamac80211: Fix RCU pointer dereference in mesh_path_disc...
2011-09-13 Yogesh Ashok... mwifiex: replace kmalloc & memcpy sequence with kmemdup
2011-09-13 Felix Fietkauath9k: fix checks for first subframe delimiter padding
2011-09-13 Yogesh Ashok... mwl8k: Set hardware flag IEEE80211_HW_AP_LINK_PS
2011-09-13 Felix Fietkauath9k_hw: fix the last register write for ar5416 addac
2011-09-13 Felix Fietkauath9k_hw: drop an unused column in AR5008-AR9002 initvals
2011-09-13 Vivek Natarajancfg80211/nl80211: Indicate roaming feature capability...
2011-09-13 Felix Fietkaumac80211: retry sending failed BAR frames later instead...
2011-09-13 Rafał Miłeckib43: LCN-PHY: implement saving and restoring PHY &...
2011-09-13 Rafał Miłeckibcma: extract some basic info about board from SPROM
2011-09-13 Rafał Miłeckissb: use u16 for storing board rev
2011-09-13 Rafał Miłeckib43: LCN-PHY: prepare functions for channel switching
2011-09-13 Rafał Miłeckib43: LCN-PHY: implement more PHY ops before radio init
2011-09-13 Rafał Miłeckib43: LCN-PHY: add R/W ops for PHY and radio
2011-09-13 Felix Fietkauath9k_hw: do not apply the 2.4 ghz ack timeout workarou...
2011-09-13 Javier Cardonamac80211: Defer tranmission of mesh path errors
2011-08-30 Greg Dietscheiwlwifi: iwl-agn-rs.c: remove old comment
2011-08-30 Felix Fietkauath9k: defer ath_tx_setup_buffer setup to the first...
2011-08-30 Felix Fietkauath9k: move seqno allocation in the tx path to ath_tx_s...
2011-08-30 Felix Fietkauath9k: move the sequence number from ath_frame_info...
2011-08-30 Felix Fietkauath9k: clean up the aggregation tid queue
2011-08-30 Felix Fietkauath9k: use u8 for the tx key index
2011-08-30 Joe Perchesath: Make ath_printk void not int and remove unused...
2011-08-30 Joe Perchesath: Make ath_dbg void not int
next